Home Articles Forums Gallery Marketplace Videos

WoodCentral Forums

Knowledge You Can Build On — Est. 1998

If you sell to woodworkers, your customers are already here

beaded finial

Posts

beaded finial

#1

Keith Tompkins

beaded finial

Keith Tompkins

I taught a finial class last weekend; a jewelry maker was teaching a bead making class as well....here's a colaborative piece; a finial turned from purpleheart, with one of her beads inserted. What do you think??? (Ignore the color of the hollow form, just needed something to sit it on)

Re: beaded finial

#2

Very Nice Keith


Re: beaded finial

#3

Re: beaded finial

Roger Chandler

Very stylish, Keith. I like the crisp lines of your finial and the bead colors accentuate the purpleheart well. I like the way you did the top part that sits directly on the bead as well......all of it flows together nicely......a bead is a neat embellishment for a finial.......

Your work always is outstanding.....sure hope you can become a demonstrator for our club in the future......your name has come up several times as a "hope for" to do a demo.

Re: beaded finial

#4

Very nice combination Keith, and.....

JamieDonaldson

..how did you join the finial sections and bead together?

Re: beaded finial

#5

Keith Tompkins

Re: Very Nice Keith

Keith Tompkins

Thanks John! much appreciated!

Re: beaded finial

#6

Keith Tompkins

Re: beaded finial

Keith Tompkins

HI Roger, thanks for the kind words...What turning group do you belong to? If it helps, I just sent the contracts out today; I'll be demonstrating at the North Carolina Symposium next November. Six rotations, finials will surely be on the list of demos.

Re: beaded finial

#7

Keith Tompkins

Re: Very nice combination Keith, and.....

Keith Tompkins

Thanks Jamie, I turned the top section first, before parting it off, I turned a long tenon that fit the hole in the bead. Then I turned the base, drilling a hole to accept the tenon that protruded past the bead by 1/2". Titebond...done. She has so many bead shapes/color combinations, the possibilities are endless.

Re: beaded finial

#8

Re: beaded finial

Roger Chandler

Two clubs Keith.....both in the Shenandoah Valley area of Virginia. Woodturners of the Virginias and Central Virginia Woodturners. At the last planning meeting several names were being tossed around as possibles in the future......yours was mentioned.......the club officers I think are going to try and coordinate with other clubs in our area where perhaps more than one club can take advantage of an opportunity when a professional is in the state.......

Scheduling these is above my pay grade :D so I don't have control over those decisions........

Re: beaded finial

#9

Ellis Walentine

That's a winner!

Ellis Walentine

Wow! Great design, Keith! Everything works perfectly.

Cheers,

Ellis

Re: beaded finial

#10

Keith Tompkins

Re: beaded finial

Keith Tompkins

Roger, I demo'd for the Blue Ridge Woodturners last year, several members from other clubs sat in. Do you know Willie Simmons?

Re: beaded finial

#11

Keith Tompkins

Re: That's a winner!

Keith Tompkins

Thanks Ellis....Any time I get a compliment from the "Big Guy" is high praise indeed! Thank you my friend!

Re: beaded finial

#12

Chuck Jones - West TN

Re: beaded finial

Chuck Jones - West TN

Keith I like what you've done here very much. Yours works; mine haven't worked so well.

My wife has been a lampworker for years making beads, marbles, flowers, etc. I have attempted several times to work them into wood pieces but have not been happy with the results. She also makes glass bead/marble cabinet knobs. I have used a couple on Beads of Courage boxes that worked out okay.

Seeing the great job you have done here gives me a kick start to go try again.

Re: beaded finial

#13

Keith Tompkins

Re: beaded finial

Keith Tompkins

Thanks Chuck! I hope the piece has given you some inspiration. I just finished talking with my lady friend....we are going to do some AWESOME colaborations! It's great when ideas are bouncing all over the place!

Re: beaded finial

#14

Re: beaded finial

Roger Chandler

Yes.......I do know Willie Simmons....have not had the privilege yet of going to his shop, but have had several conversations with him.....one at the Raffan Demo at Blue Ridge, and he demo'd at WoVa.......saw him at the symposium as well.

Re: beaded finial

#15

Don Leydens

Re: beaded finial

Don Leydens

Super nice, Keith. Lots of possibilities is right and you've given us some great ideas. Thanks!!

Re: beaded finial

#16

Re: beaded finial

charlie belden

Keith:

Collarboration is a great way to expand how one thinks of possibilities and ways of adapting the familiar with the unfamiliar. In this case, rather than thinking of the finial as a whole when deciding on a design, you start with the glass bead and figure out what will work above and below it. Fortunately, beads are elements of turned wood finials, and you have a lot of experience turning nice wood finials. But, unlike wood, you can't turn down a glass bead to tune the proportions of the overall finial so everything else is dictated by the glass bead.

I like the angularity and crispness of the upper part of your finial. It's what's below the glass bead that, to me, is incongrous. Angular and crisp above, rounded and flowing below. Personally, I'd go with angular and crisp for the wood elements of the finial juxtaposed to the a smooth flowing hollow form below and the smooth curved glass bead.

Here's you original with two variations done in PhotoShop, the first having the bottom part of the finail echo the upper part, the other basically thinning down what you had, leaving the glass bead as is, emphaising the glass bead. A third variation would be a combination of Echo & Thinning.


Re: beaded finial

#17

Leo Cuellar

Pretty Cool!


Re: beaded finial

#18

Re: beaded finial

Craig Daymon

First, let me say that I have never turned a finial this nice. I especially like the upper purpleheart section. It is outstanding.

I really like the use of the bead, but personally, I don't care for that bead. Love to see a natural stone (granite?) bead there or maybe a patinated copper bead? Certainly there are other glass beads that I would like as well.

Looks like your curve is not so smooth in the lower purpleheart section. A bit straight in the upper half.

Overall though, another fantastic finial. Thanks for sharing.

Please remember that I did say that I have never turned a finial this nice. Just offering an observational critique.

-Craig

Re: beaded finial

#19

It's all Charlie's fault!

GaryG in MD

My reaction to the original is much like everyone (except Charlie) else's -- great finial. And it is. Wonderful work. Great combination of wood and glass. Love it. Classic.

BUT, I have to admit that Charlie has a point.

I kind of like that thinner one on the right. ;-)

I think the glass stands out a little better that way.

For the next one?

...Gary

Re: beaded finial

#20

Re: beaded finial

Randy Gleckler

Great looking, very very nice

Re: beaded finial

#21

Keith Tompkins

Re: beaded finial

Keith Tompkins

Thanks Craig, My picture doesn't do the bead justice...in person, it's very cool. She has boxes full of different kinds. I agree with the base section..it's a bit heavy because there's a round tenon extending through it. I used caution turning it so I didn't blow through exposing the tenon. But, not too bad for a ten minute finial :D

Re: beaded finial

#22

Keith Tompkins

Re: beaded finial

Keith Tompkins

Hey Charlie, thanks for taking the time to post....Luckily, she can make any size or color combination of bead, so I can taylor my finial to work with it, or I can specify the size I want. In this finial, my primary concern was being able to incorporate the bead, yet have enough strength to stay together. I've proven it's definitely doable! So now, I refine, just as you did with photoshop, except in my head! My next ones will be much improved.....Plus, there's one coming which goes off in an entirely new direction! You bring up a good point...we should all analyze our work...it's the fast track to big improvements!

Re: beaded finial

#23

fantastic!


Re: beaded finial

#24

Keith Tompkins

Re: beaded finial

Keith Tompkins

Charlie, here is another finial I turned at one of my classes...the beaded finial was based upon this one....very similar to what you have drawn!

Re: beaded finial

#25

Re: beaded finial

charlie belden

Keith:

Proof of Concept AND Perfect Piece seldom are attainable simultaneously.

You've worked out a method, shown the concept works AND got really close to nearly perfect. I look forward to seeing the concept developed and refined.