Home Articles Forums Gallery Marketplace Videos

WoodCentral Forums

Knowledge You Can Build On — Est. 1998

Premium Domestic, Figured & Live Edge Hardwoods in Stock. Best Prices for Serious Woodworkers.

Oriental Handled Basket

Posts

Oriental Handled Basket

#1

Oriental Handled Basket

Bill Clark


It’s been a long time since I’ve posted any of my work. I have been experimenting with several ideas, and this is one of the pieces in my recent studies. For some time I’ve wanted to make a piece that incorporated handles. Following my oriental themed work I designed this piece with handles that were turned into the base. I then removed the excess material. The lid follows the similar pattern of my previous “Ginkgo Haiku” trio, but the piercing is a new pattern for me. As with the original piece, the lids demanded a great deal of time. They had to be turned thick enough to support the inside lip, beads and texturing on the outside ring and yet be consistently thin (1/16”) for the pierced section and thick again for the beaded base of the lid handle. The lid handle itself is another new design for me and was made from fiddle back maple which popped the grain nicely when stained and finished. The branded sections were finished in black and the light brown natural colored areas were airbrushed with a golden brown stain. The piece is 5 ½ “ wide and 4” tall including the handle. All comments and critiques are welcome.

Re: Oriental Handled Basket

#2

Oriental Handled Basket Lid Detail

Bill Clark


Lid Detail

Re: Oriental Handled Basket

#3

Beautiful !!


Re: Oriental Handled Basket

#4

Ellis Walentine

You've outdone yourself, Bill

Ellis Walentine

I will never cease to be amazed by the controlled precision and compositional mastery of your work. Beautiful job!

Ellis

Re: Oriental Handled Basket

#5

Re: Oriental Handled Basket

Randy Gleckler

that is just... I can't even think of the right word. Amazing doesn't do it justice. That is a Fantastic piece Bill, Really like it and the work that went into it.

Re: Oriental Handled Basket

#6

Re: Oriental Handled Basket

Mike from St. Clair Shores

This is a very very nice piece. I really like all the attention to details and the perfect execution. Start posting more! Your work is beautiful.

Mike

Re: Oriental Handled Basket

#7

Oh my! Lovely!


Re: Oriental Handled Basket

#8

Re: Oriental Handled Basket

charlie belden

". . .designed this piece with handles that were turned into the base. I then removed the excess material."

"I then removed the excess." - an understatement if I've ever heard one.

The handles have a cove detail on the top and bottom of the outer edge. Not a problem if the coves were turned before the handles were cut. But it appears that those coves are "stopped" before reaching their ends. Then the "stopped" ends look to be chamfered - a subtle detail that gives them a nice finished look.

Then there's the removing of wood between the handles. That wouldn't be a problem - on a FLAT surface. On a curved surface things get much more "challenging". Any ripples would be noticeable - and distracting from this fine piece.

Were the handle detail and the cut out between them routed?

Another excellent piece, both in terms of the design, choice of wood and finishes as well as the execution - which must've taken quite a bit of thought - time and concentration.

Re: Oriental Handled Basket

#9

Re: Oriental Handled Basket

Jake (SoMN)

Wow, You give us all something to aspire to.

Jake

Re: Oriental Handled Basket

#10

Mike Stafford

You da man, Bill!!!  Wonderful!


Re: Oriental Handled Basket

#11

Re: Oriental Handled Basket Lid Detail

bob davis

DITTO

Re: Oriental Handled Basket

#12

Re: You've outdone yourself, Bill

Bill Clark

Thanks Ellis for the kind words. I keep trying to push my personal envelope. I seem to spend much more time in working with ideas than producing stuff. Guess that's why I don't turn out too many pieces during the year. Thanks for giving me a place to share my work.

Re: Oriental Handled Basket

#13

Re: Oriental Handled Basket

Bill Clark

Charlie, you have a good eye. You always spot the hard to execute stuff on my work. I tried use a small router to remove the excess handle material. I made special jigs to hold the router but found the tear-out was unacceptable. I decided to use my bandsaw of all things. I tilted the table and cut near the pencil line. I then used a 1" stationary belt sander to finish the job. The chamfered ends of the base and top handles were also sanded on the belt sander with great care.

Thanks Charlie for the great critique.

Re: Oriental Handled Basket

#14

Don Leydens

Re: Oriental Handled Basket

Don Leydens

Over-the-top gorgeous. The design work and craftsmanship are a pleasure to behold.

What an outstanding piece, I think I like it!