Home Articles Forums Gallery Marketplace Videos

WoodCentral Forums

Knowledge You Can Build On — Est. 1998

Want Better Milling & Firewood Knowledge?

hope u guys dont mind me planning a turning shop

Posts

hope u guys dont mind me planning a turning shop

#1

hope u guys dont mind me planning a turning shop

avalon

my building will be empty this weekend... and i am going to paint...

first question.... does a woodturining shop need a sink? i have one but could take it out if i needed..

2... lights for lathe... want to find some goosneck type lights i can hang from the ceiling and use for turning work lights... somehting 16-24 inches... anyone know of anyplaces?

d

Re: hope u guys dont mind me planning a turning shop

#2

JL

Why would we mind?

JL

Sink - big plus. I sometimes go over various pieces with a damp paper towel or rag to raise the grain before final sanding. I usually do this with pieces that are "foodstuff" pieces - i.e. rolling pins, cutting boards, mixing bowls, salad bowls, etc. A sink is also useful for washing hands (or flushing out bleeding woods), flushing out eyes, etc.

I've got track lighting over my lathe. I have the sort of fixtures in the track in which you can put the PAR lamps and point them where you want. I also have a "portable" lamp fixture with a magnet base. That one travels from tool to tool and is used where needed. It isn't a gooseneck though, it is the type with articulating arms. I like my track lights. They illuminate the lathe bed quite well. Now that I have an extended bed, I'll have to extend the track and get a couple more fixtures. I prefer having something that's out of the way myself.

Re: hope u guys dont mind me planning a turning shop

#3

Steven Antonucci

Sink in Peters Valley

steven antonucci

We used to have a lathe right next to the sink, and one of the guys in the shop got tired of pulling wood strings out of it, so he made a plywood cover for it.

I would always want running water in my shop given the chance. Clean-up or just filling my Tormek, I think it's a nice plus one...

I would paint some other color than white. White will give you the best light reflection, but always look dirty. If you pick a nice light beige, I think the sawdust will hide a little better.

S

Re: hope u guys dont mind me planning a turning shop

#4

Re: hope u guys dont mind me planning a turning sh

Bill Turpin WNC mountains

Since you have running water and drainage, what about a toilet in a 4' x 4' enclosure?

Re: hope u guys dont mind me planning a turning shop

#5

Leo Cuellar

Bill beat me to it!

Leo Cuellar

Definitely leave the sink. I was going to suggest at least a urinal would be handy. :

Re: hope u guys dont mind me planning a turning shop

#6

Re: hope u guys dont mind me planning a turning sh

Nick Todd

A sink with a small hose will give you th ability to flush your eyes, in case you happen to get dust or small pieces of wood on the surface of your eye. A mirror would also be handy.

Thanks.....

Nick

Re: hope u guys dont mind me planning a turning shop

#7

Chuck Jones - West TN

Mirror?

Chuck Jones - West TN

Heck if I want to look at the backside of one of my turnings, I just turn it around. 8)

Re: hope u guys dont mind me planning a turning shop

#8

Re: Mirror?

Nick Todd

Chuck,

I was thinking about looking at your eye ball incase you get some sort of particale in it. :D You made me laugh!

Nick

Re: hope u guys dont mind me planning a turning shop

#9

Might look at track lights

Ray - Middletown, In

I acquired a track light system and found to be just right.

Ray

Re: hope u guys dont mind me planning a turning shop

#10

Rockler sells a 24" gooseneck light.

roger lance