Home Articles Forums Gallery Marketplace Videos

WoodCentral Forums

Knowledge You Can Build On — Est. 1998

Good Hope Hardwoods - Walnut Slabs & Specialty Hardwood Lumber

Just because I can

Posts

Just because I can

#1

Chuck Jones - West TN

Just because I can

Chuck Jones - West TN

I suspect when anyone buys a big lathe they tackle something ridiculously large--just because they can. Yup. That's what I did. Mounted a piece of American Beech 28" diameter, bone dry, hard as concrete, spalted, checked, and a little punky in spots. Turned out almost 25". My wife likes it. Although I am a bit suspicious of her sincerity because she asked how I decided on the form. To heck with form, I was more concerned about self preservation.

I was hoping to wax and buff it, but I guess I'll have to find the old hand held buffer.




Now, if I can just remember where it is that I've been storing those scrap pieces I'll see how ornaments work out on this big guy. 8)

Re: Just because I can

#2

Mike Stafford

Re: Just because I can

Mike Stafford

That is a fine looking platter and an even more handsome lathe.

Jamie Donaldson will ask you what name has been given. He calls his "Studly" and I call mine "Modine" because she is so sweet. :b

Enjoy your new Stubby!!! :D

Re: Just because I can

#3

Re: Just because I can

John Lucas

Now I'm gonna have to come a visit to see the new "baby". I just rented a floor polisher. you could use that do that bowl. I have an 8" grinder that will hold 10" buffing pads. :)

Re: Just because I can

#4

Chuck Jones - West TN

Re: Just because I can

Chuck Jones - West TN

John, come on over and I'll give you the rest of that 8' x 48" diameter, hollow beech log. You might want to bring the truck this trip. 8)

Re: Just because I can

#5

Chuck Jones - West TN

Re: Just because I can

Chuck Jones - West TN

Mike I'll be thinking about the name, but I believe the two best ones have been taken. :)

This one is eleven+ years old so I am hoping I'll benefit from it's experience. :\

I was not in the market for another lathe, but this one came available locally, along with a truck load of tools and wood and I just couldn't help myself. Had it for about two weeks and I'm starting to really like.

Studly and Modine? Do you guys live close enough for them to get together? Naw, bad idea. Forget it.

Re: Just because I can

#6

Steven Antonucci

Don't need a better reason than that one!

steven antonucci

Well done!

25" diameter moves a lot of wood acros an edge at any RPM...

S

Re: Just because I can

#7

Almost all turners dream of turning......

JamieDonaldson

..a big one, and after doing so the desire to make #2 seldom arises! What is the serial number of your Stubby, so we know where you fit in the Stubbygroup?

Re: Just because I can

#8

Chuck Jones - West TN

Re: Almost all turners dream of turning......

Chuck Jones - West TN

Jamie,

The only number I see is on the ways and it's 999123. Looks like something someone would make up. Do you suppose it's a phony copy?

Re: Just because I can

#9

Re: Almost all turners dream of turning......

John Jordan

Glad to see you went for it, Chuck. That's a legit serial number. the 999 doesn't mean anything. That is #123. :)

I have never named mine, but I don't have any other things with names either. :D

John

Re: Just because I can

#10

Chuck- my Studly is #199, and I've......

JamieDonaldson

...alway been interested in how products like a lathe take on a life of their own as they travel round the world. Your Stubby must be one that JJ imported and has John's name cast into the side of the way beam. We owners had a laugh when JJ passed the import business to a new owner, because I kidded Bill about the fact that the bed would now have to be longer to have room to cast his name on the side, William Rubenstein !! :D

Re: Just because I can

#11

Phil Stivers

Re: Just because I can

Phil Stivers

They might get a mini-lathe :)

Re: Just because I can

#12

Re: Chuck- my Studly is #199, and I've......

Jim Pugh

My Stubby is #089 and I'm one of the early members of the Stubby Group. Very fine lathe purchased from a very fine gentleman - John Jordan.

Re: Just because I can

#13

Chuck Jones - West TN

More about the Stubby...

Chuck Jones - West TN

You're correct this one has John Jordan's name on it and I think it's in raised letters so we could say his name adds weight, both figuratively and physically. John was very helpful when I was thinking about buying it. He didn't discourage it at all. :)

It originally belonged to a man named John Elford in Jackson, TN. He has a growing and successful coffee import business and a growing teenage family. He reached a decision that he had to eliminate some of the other things that were placing demands on his time. He had not turned it on in over four years.

I know it's repetitious to say the Stubby is an amazing piece of engineering, but it is. Every time I think I have found a shortcoming one of my smart-a$$ed sons will stop by and show me I just haven't figured out how it's supposed to work. A couple days ago I was complaining that there was not room for the tail stock locking handle to travel far enough to get it tight. My son reached over, lifted the spring loaded handle, set it in another position, and tightened it down. I would have eventually figured it out. >(

The only real issue I have had is getting my vacuum connected. The seals on the shaft are bad. Bill Rubenstein has been very helpful and I have ordered one of his ready-made adapter kits which he is supposed to ship as soon as he recovers from the AAW symposium trip.