Home Articles Forums Gallery Marketplace Videos

WoodCentral Forums

Knowledge You Can Build On — Est. 1998

This is the most versatile work station you will ever use

Just a bowl thread

Posts

Just a bowl thread

#1

Just a bowl thread

ronnyeelen

Here's something I made with

- a Tendolools bandsaw

- a Oneway lathe

- a Crown Ellsworth bowl gouge

- a Oneway Talon chuck with large Tower jaws

- some Thompson bowl gouges with David Peebles handles

- a Hamlet spindle gouge

- a Sorby multi scraper with small thingies

- a Creusen slow speed grinder

- a Tracy Owen scraper or 2

- some appreaciated Terry Scott advice

- that circular sanding paper from a really well known brand... which I can't remember

- Shellawax sanding sealer wichh I won't use again, probaly because I did it wrong

- Chessnut Lemon Oil

- Beall buffing system

- and some other stuff maybe

- ah yes, and a very good lesson for me: my (how do you write that) perscription glasses (?)


The wood is Wallnut Burl, from the Kaukasus.

Size is...


Side view...


Comments of all kind welcome.

Ronny

Re: Just a bowl thread

#2

Re: Just a bowl thread

Cyril Griesbach

Ronny,

Thanks for an enjoyable post with, I suspect, intended humor, and a really nice bowl.

Re: Just a bowl thread

#3

Re: Just a bowl thread

Randy Gleckler

That is a GREAT looking bowl man. Really like it. nice job

Re: Just a bowl thread

#4

Steven Antonucci

I can say I knew you when...

steven antonucci

I have one of your bowls in my collection, and I might have to pull it out of the popcorn rotation for fear of it losing value! (it was a WC holiday trade item from a few years back)

Very nice, and even better to put a face to the name! Now grow a big white beard so you look like a turner!

S

Re: Just a bowl thread

#5

Really Beautiful bowl- great shape

John Lucas

Re: Just a bowl thread

#6

It seemed time for some fun again 

ronnyeelen

Re: Just a bowl thread

#7

Re: Just a bowl thread

Mike from St. Clair Shores

I really like the undercut rim. Walnut burl is a favorite wood of mine. Nice job!!!

Re: Just a bowl thread

#8

Re: the measuring tool is...

ronnyeelen

... not me :D

The tool was created 20 years ago, as part of a 'set of 3' or triplets as they call it. He is my son.

The other 2 measuring tools in the set are not really tool-type, they are... ha well, I should stop while ahead. Or I get all the ladies against me. :b

Keep eating corn flakes from it.

Re: Just a bowl thread

#9

You're Having Fun

Mark Mandell - Gone Round In Jersey

and it shows. :)

Keep up the nice work.

Re: Just a bowl thread

#10

Re: Just a bowl thread

George Van Beynen

That is one fine bowl you made Ronny! You have successfully tested yourself with some challenging curves on a beautiful piece of wood. Thanks for sharing.

Re: Just a bowl thread

#11

Re: Just a FUN bowl thread ! Thanks.

Don Orr

Re: Just a bowl thread

#12

Don Leydens

Re: Just a FUN bowl thread ! Thanks.

Don Leydens

I really like the shape of that bowl Ronnie! Excellent work!

Re: Just a bowl thread

#13

Good looking!

Joanne in Point Pleasant, PA

The bowl is nice, too. :-)

Re: Just a bowl thread

#14

Re: Just a bowl thread

Donna Banfield

This is exactly the kind of post that I enjoy reading.

Love the photos - the one with you in it, especially. Nice looking bowl, thanks for sharing.

Re: Just a bowl thread

#15

Re: The foto is not me.....

ronnyeelen

Thanks. But...

8)

He is my son.

Check the reply to Steve Antonucci's "I can say I knew you when..."

Ronny