This an extremely interesting photo essay on a steam-powered saw mill in Oregon. It is the last steam-powered commercial mill in operation today. It can cut HUGE timbers!
This brought back some of my childhood. My grandfather milled timber all over WVA and VA for years. The mill he ran was nothing like this though. It was moved to the timber. They would cut the trees and use mules to bring them to the mill. After the wood lot was cut they would pack every thing up and move to a new sight.
The mill ran off a big truck motor. I was alwasy surprised that more people did not die in saw mills. The blads had on guards. They did not bandsaw blades. I remember a big OSA would have a field day in one of the old mills.
He used to say there was no place any hotter than a saw mill in the summer and no place colder than a saw mill in the winter. He worked in the mills for 40 years and got out with all his fingers and noes. He was a very careful and lucky man.
Re: The last steam-powered commercial saw mill *LINK*
Manufacturing processes, whether new or old, are really interesting to me. Thanks for the post.
About 12 years ago I had the opportunity to see a sawmill in Indonesia. It was on the opposite end of complexity. Logs were loaded with a big lift. They were positioned manually. The sawyer set the width of cut by holding a metal rule next to the blade. (Several fingers were missing). The log was pushed through the blade by two barefoot men. It was returned for the next pass by the same method.
Re: The last steam-powered commercial saw mill *LINK*