Home Articles Forums Gallery Marketplace Videos

WoodCentral Forums

Knowledge You Can Build On — Est. 1998

Build it. Rock it. Rockler has your woodworking tools.

Paying it forward...

Posts

Paying it forward...

#1

Steven Antonucci

Paying it forward...

steven antonucci

With the passing of Russ Fairfield, I have thought somewhat reflectively about the idea that woodturners will leave a legacy that goes far beyond the objects that they produce. I would suspect that many people here have never seen much of Russ Fairfield's work, but have shared in his wisdom because he has followed the time honored tradition of "paying it forward".

Paying it forward is a simple concept. It means doing something for someone you've never met. It means creating goodwill for the greater ideal. It means thinking of others first. It is what great people do.

I never met Russ and we only traded e-mails once. While we disagreed on the topic at hand, I respected the way that he handled it and how carefully he chose his words. It took a while, but I understand his point much better today than I did when he first made it.

We all learned something from Russ. There was just too much that he was willing to share that it was impossible to not learn from him. I understand that his illness affected him recently, and I wish that I knew that much, much earlier. I think Betty said it best: none of us know what other things we have to bear in this life. Assume the best intentions.

That said, I'd like to celebrate Russ's legacy here on WoodCentral by doing two things. Firstly, I'd like to share the single most important thing that I learned from Russ.

"The wood doesn't care whose name is on the tool. The only thing is knows is if the edge is sharp and being presented properly."

Clear and concise. To the point. I use it EVERYTIME I TEACH.

Which brings me to the second way that I think we can honor Russ. Paying it forward. Seek opportunities to share, don't wait for them. The knowledge that you acquire in this lifetime has value beyond this lifetime. This is Russ Fairfield's true legacy.

I wish I had met Russ. I think we would have been friends.

Steven

Re: Paying it forward...

#2

Re: Paying it forward...

John Lucas

Steve Like you I picked up a lot of good things from Russ. I am 100 percent agreement on paying it forward. Not just here but in life as well. If everyone did that this world would be a better place. Whenever I help someone and they try to pay you my response is always the same. Just do something good for someone else.

Re: Paying it forward...

#3

Alan Zenreich

Re: Paying it forward...

Alan Zenreich

Steve,

I strongly agree with the pay it forward approach.

I've done a lot of teaching over the years (mostly computer database and photography or outdoor cooking topics) and only recently taught my first little woodturning workshop.

Also, I particularly like to encourage young turners. There is a father/daughter pair in our local club. The girl is 15 and has been turning pens. A few months back, I invited them to my home to play in my shop, expose her to some different techniques, tools, materials and approaches. We saw them last week, and her father noted that her results have improved, and that the session at our house was an inspiration to work towards a finer product. It's tricky teaching a teen anything, because they already know it all... so it's more a matter of nudging and planting seeds so they think it's their idea.

In any field, there are lots of people who are very good at what they do.

- Of them, very few know WHY they do what they do

- Of those that know why, very few of them can teach others

- Of those that know why and can teach, very few of them can write

So finding someone who is an expert in their field, can teach, and write is a rarity. Russ was one such person, and his passing is a great loss.

Re: Paying it forward...

#4

Re: Paying it forward...

Ray Carson - Lawrenceville, NJ

I never met Russ either Steve. From all the accolades and sentiments that he's received and what I've read over the past couple of days, it sounds like he was a really good guy.

Your post speaks volumes. Words to live by.

Ray (paying it forward)

Re: Paying it forward...

#5

Jim in Burlington Ont.

Well Said Steve

Jim in River Oaks, Ont.

Hi Steve,

I too believe in paying it forward, I do try to do that as part of who I am.

Russ taught me some techniques, some I use, some I don't but the fundamental thing I will say I "heard Russ" telling me was try it, if it worked, good, if not either find out why or find another way, then pass it on to others. Russ was good at that, not the first person I have met like that, but Russ did it well.

As a furniture maker I have been given the gift of paying it forward by some really great people, as a turner I have also been given that gift too.

No matter who said what, or how I have learnt something, I know that sharing it is what makes me happiest and when I teach, I am an open book to my students.

For me, being an open book on how I do things and what I know is what gives me the satisfaction of continuing to do what I do. I find happiness in knowing I have made a difference for someone else with my words or assistance. I am not interested in self promotion or being in the spot light, that is not what Paying it Forward is about.

Take care,

Jim

Re: Paying it forward...

#6

Steven Antonucci

Thanks- you highlight an important point

steven antonucci

Pay it forward is not an advance for yourself. You do it not to get paid back, but knowing that you will never be paid directly back. The person you pay has the responsibility of paying SOMEONE else forward, not you back.

As we enter 2011, I challenge everyone in every part of their lives to pay it forward.

Steve

Re: Paying it forward...

#7

Barb Siddiqui

Re: Paying it forward...

Barb Siddiqui

I had met Russ, and corresponded with him several times.

I think he would be most sincerely honored by your post, Steve. If this could be his legacy, what an honor it would be! Nicely done. I know of nothing better that could be said of a person's life.

Re: Paying it forward...

#8

Re: Paying it forward...

Brian George

Steve - Exceptionally well said. I never met the man but, he did impact mine , as well as so many other lives in a positive manner. What a legacy to leave...

Re: Paying it forward...

#9

Re: Paying it forward...

Scott Greaves in Blackfoot ID

Hi Steven,

Thank you for this topic.

One of the things that Russ conveyed to me was that there is not one "right" way to do things. You need to be open to different ways to do things, and choose what works for you. That's one of the ideas I always include in my classes.

I have known Russ for may years by way of the Internet. He was very involved while Jeff Brown and I were starting up the International Association of Penturners, and he was on our first Board. I did have the opportunity to visit Russ at his home a few years back, and had quite the enjoyable time just shooting the breeze with Russ. I also have to admit that, lucky me, Russ drew my name in a Wood Central Secret Santa a few years back, and I have a wonderful large maple bowl he turned in my home. I really am going to miss him.

Paying it forward is something I heartily agree with. Which reminds me, it's time for me to start writing articles again!

Scott.

Re: Paying it forward...

#10

Steve Kubien

Perfect

Steve Kubien

You've done good with this post Steve.

Re: Paying it forward...

#11

Re: Paying it forward...

Skip Beardsley

Steve,

I know Russ would be honored by your suggestion.

I had the honor of being Russ and Gerry's host when he came to our club to do a demo and several days of workshops. Had the chance to get to know them both and to ride for an hour each way for four days with Russ. Lots of wonderful conversations about the world of turning, techniques, finishes. We had corresponded for several months prior to the actual demo date and many times thereafter.

One of the conversations was about the skew chisel. He said I should use that tool even though I make mostly bowls. His thought was that being able to use the skew would make me a better turner. I took his advise and he was correct.

After the weekend he stayed here another day and we had a wonderful, for me, time playing in the shop. What an honor to have spent time with him. Just before he left he came up to the house with a beautiful hollow form vase made out of big leaf maple burl. He shyly asked my wife if she would like to have it as she had cooked many meals, including a dinner for our board members and committee member to meet and greet Russ and Gerry before the weekend started. Needless to say, that vase has a place of honor in our home and will be a cherished rememberence of Russ and our time together. Sure will miss him.

Re: Paying it forward...

#12

Re: Paying it forward...

Joanne in Point Pleasant

What a lovely post and thread! I hope somebody zips it up and sends it to his family. I think they would be proud and happy to read your thoughts and feelings honoring the Man.

Re: Paying it forward...

#13

Re: Paying it forward...

Don Orr

Wonderful Steve. I bet Russ would be pleased. When I first discovered this website I read all the posts I could. I quickly noticed that I gravitated to a few posters whose demeanor and knowledge and generosity was profound to me. Russ was a mentor to me whether he knew it or not. I learned something from probably every post I read of his. Might not even have been about turning. Sometimes just how to be civil in a difficult situation, or simply listen. I've been to his website many times and learned a great deal there as well. His "Corner" here on WC is a phenomenal resource. The legacy he leaves as a woodturner is only exceeded by that which he leaves as a person.

The idea of paying it forward is a great tribute. If we all could say to ourselves once in a while "What would Russ do/say/think?"

I am fortunate to have met Russ briefly at one of the early Totally Turning events in Albany, NY. I also have one of his demo pieces from that event which just became a much more treasured item.

Re: Paying it forward...

#14

Re: Paying it forward...

matt overton

I share all the sentiments already expressed. I never met Russ, but read every post because of the respect I came to have for his wisdom. As a tribute, I plan to re-visit his website to read and watch everything he has shared there. May he remain in all our collective woodworking consiousness!