Home Articles Forums Gallery Marketplace Videos

WoodCentral Forums

Knowledge You Can Build On — Est. 1998

100+ Wood Species + Full-Shop Services: Lumber, Veneer, Tools & CNC. Everything in One Place.

Woodcraft Grinder

Posts

Re: Woodcraft Grinder

#51

Dang, Rob.

Carol Reed

>The one vendor on the web that didn't say it was discontinued, emailed back that it was a direct ship from Delta, when I inquired if it was in stock.

The other issue is shipping. As much to ship it as the grinder is worth. So I want one in Arizona or Southern California. I'd even go to Albuquerque to get one. I could visit Nancy Laird. Hmmmm....think I'll call her.

You are one lucky dog!

Re: Woodcraft Grinder

#52

Re: THANK YOU!  THANK YOU! THANK YOU!

Galen Vetterick

>Rob

The Woodsmith Store has always had the 6" and 8" General slow speed (1725 rpm) grinders. They had at ACME for a while but have not seen in my last trip there.

Thought you had an 8" grinder you always brought to the mall demo?

Did it run away?

Galen

Re: Woodcraft Grinder

#53

Re: $300 Baldor Grinder?

don lewonczyk

>John I think for the $300 you can still get the Baldor mini grinder. You know the two inch model!!!! Ha, just kidding. DonL

Re: Woodcraft Grinder

#54

Re: THANK YOU!  THANK YOU! THANK YOU!

Peter Lamb in SC

>An update on Woodcraft grinder. Having bought two in November and experiencing the same issues after checking bushings and re-surfacing both faces of all four washers and dressing the wheels all to no avail. I too spoke with tech support and customer service. I was informed that they have not gotten the necessary support from the vender. They will credit the purchaser for the defective grinder. Woodcraft expects delivery of 1000 new grinders in April which will sell at about the same price.

Peter

Re: Woodcraft Grinder

#55

Re: $300 Baldor Grinder?

john lucas

>Hey do they make a 2". You remember I have micro tools and they need a small grinder. :)

Re: Woodcraft Grinder

#56

Re: $300 Baldor Grinder?

Barry

>Remember, you'd also need a mini Oneway jig for sharpening.........

Re: Woodcraft Grinder

#57

Re: THANK YOU!  THANK YOU! THANK YOU!

Barry

>I've had one of these boat anchor grinders for 6 or 7 years. You'll like it. I'm still

not sure why it was necessary to make it so heavy. Maybe it cuts down on the

vibration, because there is very little.

Re: Woodcraft Grinder

#58

Rob Wallace

Re: THANK YOU!  THANK YOU! THANK YOU!

Rob Wallace

>Hi Galen!

Last fall, I was planning on buying another Woodcraft 8" grinder around Christmas time (when they were on sale and with free shipping), but Woodcraft was no longer offering them. I have already purchased a second Wolverine system (with our recent Craft Supplies group order), and was going to build a "traveling" grinder set-up that I could take to demos etc. Given the recent poor quality of the Woodcraft grinders, I consider this situation a good thing!

The new Delta will now reside permanently in the shop, and I'll use the Woodcraft grinder as the traveling unit. You'll see my current grinder again at our Turners meeting on Feb 28th for the sharpening demo.

I hadn't thought about a General grinder (The Model Model 15-825 M1 is their 8" unit) - the cost is about $ 180 (USD) and it is considerably lighter in weight than the Delta. It's still an 8" slow speed, so if it can be secured to a bench and is well-balanced, this should work too.

It's good to hear that Woodcraft will be getting some new (and hopefully better quality) grinders in April. Thanks for the update Barry!

Rob

Re: Woodcraft Grinder

#59

Re: $300 Baldor Grinder?

don lewonczyk

>John if you will send me the $300 I'll send you a 2" grinder . :D

Re: Woodcraft Grinder

#60

Don Geiger

Re: THANK YOU!  THANK YOU! THANK YOU!

Don Geiger

That's great Rob!! What I've learned from this is: If I find another one out there I should grab it! I've got mine mounted to the top of my rolling mechanic's cart and take it on the road with me to do my demos. I've often worried about someone breaking into my trailer and stealing the contents or taking the whole thing with my Stubby and now "rare" Delta grinder in it.

My trailer is an aerodynamic fiberglass enclosed motorcylcle trailer that I've customized to haul my lathe and tool cart or my 57 BMW Isetta. I put labels on the door stating: "No Motrocycles Inside!" As you might guess motorcyles are a hot item to be stolen especially down here in the Sunshine State.

Don