Home Articles Forums Gallery Marketplace Videos

WoodCentral Forums

Knowledge You Can Build On — Est. 1998

Combination Press Plough Plane

Glaser/CET/Cryosteel Gouges ? ? ?

Posts

Re: Glaser/CET/Cryosteel Gouges ? ? ?

#76

Re: I hope Paulo brings back the Glaser screw chuc

Paulo Marin

>Yes! Jerry Glaser designed and patented a wonderful screw chuck that is without a doubt the best screw chuck ever. All I did was to engrave it with his name on it. I thought it would be cool to do that.

I would have had more on the market sooner as well as tools, but in order for me to recoup my large investment, I decided to supply tools and chucks to Europe at the time, knowing the risk of starving our american market. But, now I am on the rebound. I feel good about having total control over production, just like Doug has. That is something he has done well and I admire him for it. When you make your stuff, you have great control over quality and inventory, which is something that affected me terribly after AAW. The only limitation is how much money you want to invest, and I am determined to invest again to create a steady flow of product, not only for the US, but for Europe and other continents. I have signed an exclusive distributorship agreement for Germany, Austria and Switzerland and I am working setting up France. I have some prospects that have contacted me for England and believe me I will enter that market.

In the past, I supplied Packard and Cutting Edge tools and Highland Woodworking, but since my production dwindled I could not supply them and decided to pull out. I think Cutting Edge closed down (I am very sorry about that because Steve and his kids were top people) and Brad Packard is a great guy as you all know..

Funny...I just remember an AAW show where Brad bought the spots for his booth and was caught in the middle of a move to a better facility. He was there, but his store was not... imagine how difficult that is to see Craft Supplies selling product and you are taking orders.. And yet, today Brad is stronger than ever.

Choice Woods (Clay Johnson) is also a top notch outfit that did everything possible to support me. At the AAW show he sold my tools for me because I decided on the last moment to sell some tools to at least pay for the hotel bill for the entourage I took with me.

Highland Woodworking, is also an awesome outfit. Phil Colson and Blair Downing are great people and their service is absolutely phenomenal.

So you can see, the end user got hurt for lack of supply and the distributors could not continue distributing, but as my friend and partner Larry miller said, the promises and expectancies that did not happen moved on their own accord.

I am enclosing a picure of our first batch of chucks and more are being made.

Thanks for reading and your support.

Paulo Marin


img

Re: Glaser/CET/Cryosteel Gouges ? ? ?

#77

Re: Another Bottom Line?? Amazing !!!

Chen Lee

>I think Russ is thinking he is a funny man, fuel for fire, a problem maker.

Chen

Re: Glaser/CET/Cryosteel Gouges ? ? ?

#78

Sorry. . . . . . .

russ faifield

>I appologize for offending anyone. Wasn't trying to do that.

I was just complaining because my 15 year old Glaser V-15 got too short, and I had to replace it with a 2060 steel that doesn't wear nearly as well in abrasive Maple.

Re: Glaser/CET/Cryosteel Gouges ? ? ?

#79

Re: Another Bottom Line?? Amazing !!!

Doug Thompson near Cleveland

>Chen, I bet you don't know who Russ is... do your research and you'll find he's in the same league as Jerry. I would apologize if I was you.

Re: Glaser/CET/Cryosteel Gouges ? ? ?

#80

Steven Antonucci

Walmart tools

steve antonucci

>I looked in the lathe aisle, and I couldn't find them? C'mon Doug, I want the Rollback prices! LOL

Re: Glaser/CET/Cryosteel Gouges ? ? ?

#81

Russ Fairfield Woodturner

Paulo Marin

>I know the work of Russ Fairfield. He has never met me but I know his work. Russ is a phenomenal woodturner. I own some of his pen videos that were given to me as a gift on my birthday by a friend, and I can tell you they are great.

As such Russ, I would love to send you a 15V tool and hopefully one of these days you will turn something for my private collection. I love your polychromatic segmented piece. Talent like yours should not be using bad steel.

The problem is that anything that comes to me from woodturners around the world becomes my wife's prized possessions. If she leaves me over this entire tool adventure, I need it replaced because she will take all the turnings with her. :)

Russ, please send me an email with your contact information. I would enjoy very much to chat with you.

Re: Glaser/CET/Cryosteel Gouges ? ? ?

#82

Re: Another Bottom Line?? Amazing !!!

Barbara Gill------WebKitFormBoundarypTwA+e87REJF0d

>Chen Lee since you have only made two posts on this forum (I searched all turning messages) and one was very negative. I think that perhaps you may be the trouble maker.

Re: Glaser/CET/Cryosteel Gouges ? ? ?

#83

Steven Antonucci

You grind too much- get a Tormek ;-)

steve antonucci

>

Re: Glaser/CET/Cryosteel Gouges ? ? ?

#84

Dick Hines

Re: Another Bottom Line?? Amazing !!!

Dick Hines

>Why don't you tell him just how you feel Barbara. LOL

Re: Glaser/CET/Cryosteel Gouges ? ? ?

#86

Dick,

Barbara Gill, Remlik VA

>If I started telling some people how I really felt, Ellis just might have to ban me. :-)

Re: Glaser/CET/Cryosteel Gouges ? ? ?

#87

Re: Walmart tools

Doug Thompson near Cleveland

>5 barns had sale prices 2 years ago... remember LOL

Re: Glaser/CET/Cryosteel Gouges ? ? ?

#88

Re: an older newbie opinion ...

Phil Powell

>People! Shouldn't ya'll just go out to your shops, grab which ever gouge you love and

stop bickering. Turn wood!

Re: Glaser/CET/Cryosteel Gouges ? ? ?

#89

Steven Antonucci

That was the Rollback pricing I was talking about!

steve antonucci

>I'll be buying some more at the AAW show or perhaps Totally Turning...

Was it 2 for $20? :-)

steve

Re: Glaser/CET/Cryosteel Gouges ? ? ?

#90

Re: Glaser/CET/Cryosteel Gouges ? ? ?

gtwilkins

>Well I will tell all of you right now, after reading the continuing posts from the CET camp especially the comments by Larry, Orlando and then the suck-up posts by the owner of the company, I will never even bother with these tools.

I refuse to support a company that behaves the way these people have through this thread, it makes me wonder what will happen in the future when they behave this way before the product is available.

Trevor

Re: Glaser/CET/Cryosteel Gouges ? ? ?

#91

Re: Another Bottom Line?? Amazing !!!

Chen Lee

>Ms Barbara,

No, I am posting on other forums too, I read mostly as I can, but find I learn more reading that talking... makes more sense than some do for me, sometimes I post though

Chen

Re: Glaser/CET/Cryosteel Gouges ? ? ?

#92

Re: That was the Rollback pricing I was talking ab

russ faifield

>Steve, watch for the "Blue Light Special"