Home Articles Forums Gallery Marketplace Videos

WoodCentral Forums

Knowledge You Can Build On — Est. 1998

Premium Live Edge Slabs, Hand-Selected in the Berkshires. Shop Unique Hardwood Pieces.

Glaser/CET/Cryosteel Gouges ? ? ?

Posts

Glaser/CET/Cryosteel Gouges ? ? ?

#1

Glaser/CET/Cryosteel Gouges ? ? ?

Barry Turner

>Does anyone know what has happened with the above? Are they still available? The Cryosteel website doesn't seem to be active. Craft Supplies not Packard lists them in their catalogues.

At one time Glaser's were the gold standard for bowl gouges. It would be a shame to see that lost, or maybe it already has been.

I have one of the early CET/Cryosteel gouges and have been very pleased with it. Now, I hear others who seem to be just as pleased with Doug Thompson, P & N's, Crown or other brands.

Re: Glaser/CET/Cryosteel Gouges ? ? ?

#2

Re: If you're looking for the gold standard

Donna Banfield

>Doug Thompson's tools are it. They are as good, if not better, than the Glaser gouges. I have several of both Doug's and Jerry's.

The difference, from what I can tell from using them both, is I can afford 2-3 of Doug's, to one of Jerry's. I don't mind turning my own handles, which might be a downside from some other turners, but it's still worth the price. Hands down.

Re: Glaser/CET/Cryosteel Gouges ? ? ?

#3

Re: Agreed!

Carol Reed - home in Strawberry

>

Re: Glaser/CET/Cryosteel Gouges ? ? ?

#4

I agree too!!!

Bill Howatt

>

Re: Glaser/CET/Cryosteel Gouges ? ? ?

#5

and with Doug, you get SERVICE!

GaryG in MD

>

Re: Glaser/CET/Cryosteel Gouges ? ? ?

#6

The new gold standard complete with handle

Gordon Seto

>We may not have to turn a handle for the Thompsons in the near future. At our last Club meeting, Doug has shown me his new roundish square aluminum handle shaft sample. It feels comfortable in my hand and it won't roll off the table. It also allow the user to know the orientation of the tool. He said they are going to be anodized with lead shot at the end for counter balance. I would imagine it would be like the Glaser handle construction. Instead of gluing in the blade, it would use set screws to hold the blade. I asked him whether there will be a sleeve over the aluminum. He hasn't made decision yet.

I noticed that Doug is not active in internet recently. May be the one man and two hands factory is busy making handles.

Re: Glaser/CET/Cryosteel Gouges ? ? ?

#7

Re: The new gold standard complete with handle

Bill Neddow------WebKitFormBoundary+w+uCg3oRve3I+f

>Fascinating, Gordon. I had heard hints that this might be happening. If the handles are even half as good as Doug's tools, he should corner the market!

Re: Glaser/CET/Cryosteel Gouges ? ? ?

#8

Ellis Walentine

They're coming back

Ellis Walentine

>I have it on good authority that Paulo Marin, the fellow who bought Jerry's business, is gearing up to re-release the Glaser line as we speak. I have no idea of which tools they will be bringing back, or what the prices will be, or anything about the tool geometry or composition. It will be interesting to see. Doug has certainly established a foothold in this arena over the past few years.

Ellis

Re: Glaser/CET/Cryosteel Gouges ? ? ?

#9

Re: Glaser/CET/Cryosteel Gouges ? ? ?

Barry L Elder

>When one person "says" they are going to do something (sometimes more than once), and another person "does" that something, then the doer gets my vote! If you find a better tool than Doug Thompson's, let me know!

Re: Glaser/CET/Cryosteel Gouges ? ? ?

#10

Re: They're coming back

Barry Turner

>I think I may have heard that before. I bought a CET/Glaser 5/8" bowl gouge in Louisville at the symposium. From what I can tell, I may be one of the few people that actually like the new version of the Glaser tools. Within days, I had a problem........lost the end plug that holds the shot capsule in. I emailed CET and actually had contact with Paulo. He promptly sent me TWO end plugs. I have not tried Doug's tools, but have heard nothing but good things about them.

Re: Glaser/CET/Cryosteel Gouges ? ? ?

#11

Keith Tompkins

Re: They're coming back

Keith Tompkins

>Hey Ellis. Merry Christmas! I think Paulo has done a disservice to Jerry's tool line and to the customer. Even if he makes a comeback with the tool line, it's going to take time to regain the consumer's trust. None of the explanations he's offered for the disappearance of the tools made any sense; I can't think of a worse business model.

Re: Glaser/CET/Cryosteel Gouges ? ? ?

#12

Re: Barry- thus was born the old saying...

JamieD

>...about "actions speak louder than words." Time will tell if there is a revival of the Glaser tools, but I don't care for cold metal handles in my winter temp shop.

Re: Glaser/CET/Cryosteel Gouges ? ? ?

#13

Competition is good�

Doug Thompson near Cleveland

>Times change, manufactures come and go, I�ve spoken to Paulo a few times, he has a thriving aerospace business and hopefully he will have time to get back into this... it�s real simple, when you don�t do this for a living it�s hard to find the time. Competition is healthy for us as consumers, it raises the standard of the products we purchase plus keeps the price down� I welcome it.

I do plan to have different handles available over the next few months, one will be a aluminum extrusion first because people have asked for it and second is because I like them� at our next club meeting I hope to have a prototype. BTW - Dave Peebles, John Jordan and Johannes Michelsen all make very good handles that work well with these tools and I will continue to support them.

It�s busy around here with the holidays, family and finally time to work on the tools.

Re: Glaser/CET/Cryosteel Gouges ? ? ?

#14

Re: Barry- thus was born the old saying...

Barry Turner

>Ain't that the truth? How long has it been since the AWW Symposium? Wasn't it in 2007? I don't even know how I managed to buy a CET/Glaser gouge there. I heard later that CET wasn't selling tools there, just displaying and demo'ing.

I'm not much of a fan of cold metal tool handles in the winter, but I kinda like the feel in warmer weather. I'm not much of a fan of broken promises either. Don't know anyone who is.

Re: Glaser/CET/Cryosteel Gouges ? ? ?

#15

Re: They're coming back

Barry Turner

>People eventually tire of hearing promises that never seem to materialize. Once trust is lost, it's very hard to get it back. As I said, Glasers were once the "gold standard" of gouges. To take a product with a reputation like that and then blow it, is tragic. I don't know how forgiving woodturners will be.

Re: Glaser/CET/Cryosteel Gouges ? ? ?

#16

Re: They're coming back

bob elliott

>As I stated on another site, the big reveal was the 2006 AAW Symposium in Louisville starring Stuart Batty and it seems it's been all down hill for Paulo from there, A.K.A. extinction for Glaser tools!

Re: Glaser/CET/Cryosteel Gouges ? ? ?

#17

It was Louisville - 2006!

Mike Brazeau

>

Re: Glaser/CET/Cryosteel Gouges ? ? ?

#18

My, My! Doesn't time fly?

Barry Turner

>

Re: Glaser/CET/Cryosteel Gouges ? ? ?

#19

Re: Competition is good�

John Scheideman

>You are a class act, Doug. Thanks for supplying us with quality products and great service!

John

Re: Glaser/CET/Cryosteel Gouges ? ? ?

#20

Re: Competition is good�

Gordon Seto

>And a very generous person supporting wood turning. Besides the donation to the AAW auction, he had a "Tool Sale" on the side at his own AAW Chapter meeting couple months ago. 100% of the proceeds went to the Club treasury. It was around $1600. That was not the only time he did that. He announced the "Tool Sale" in advance and told people to bring money. That cut into his real sale when he can pocket the rewards for his hard work and cost.

He also donated tools for "Turn and Learn" in the Club. I knew he had some Oops tools that are not cosmetically perfect but good otherwise. I asked for them for use in class setting. I anticipate members would be rough and grinding away good steel. He refused and insisted on giving out those from the perfect pile that were packaged, ready to ship. He said, "If it has my name on it, it has to be perfect."

He is someone of rare character, UNDER PROMISE, OVER DELIVERY.

Disclaimer: Absolute no financial relation other than a satisfied buyer. Proud to belong to the same Club and have a chance to call him friend.

Re: Glaser/CET/Cryosteel Gouges ? ? ?

#21

Re: Competition is good�

John Scheideman

>I agree. A couple years ago I ordered a gouge from Doug and he mistakenly sent two. I called him to try to return it and he said he would just donate it to our school woodworking program. What a great guy!

Re: Glaser/CET/Cryosteel Gouges ? ? ?

#22

Re: Glaser/CET/Cryosteel Gouges ? ? ?

Paulo Marin

>MY APOLOGIES FOR THE LONG POST! SINCE I DON'T DO THIS VERY OFTEN, I HAVE HELD BACK MY THOUGHTS FOR AWHILE.

I must say it is not funny to be bashed all over the place, but sometimes, you have to take 50 steps back to go 100 forward.

The reason I held back the tools is because of my bad experience over production. At the 20th anniversary, I believed I would have my inventory ready for the "after show" effect, and in reality what I had was a tremendous disappointment with an associate and the loss of a lot of money. I find it interesting that people ask for explanations. My belief is that you wash your dirty laundry at home! What good would it do for me to reveal my disappointments?

Instead, I decided to respond with a status, so here we go:

Today we hold a 10,000 square foot facility in Camarillo, California (please check it out: www.atcinc.us) You will be able to see by our client list that we are busy in government work, space, medical and all sorts of other projects. When most shops are closing down due to the economy, I have grown 38% in the past year.

We currently have (5) 2009 CNC HAAS Super VF4 Mills which showcase 30HP, coolant through spindles/1400IPM/12000 RPM, a 2010 HAAS Super VF3 with the same properties as the VF4, (3) 2009 HAAS SL20 Lathes and (2) FEMCO CNC Lathes. We also have a Mitsubish Wire EDM and a Hadsvedt Sinker EDM, a full quality control room which showcases a Brown and Sharpe EDM, Three Mastercam X3 stations where all of the work is designed on a daily basis. My son Jesse has graduated as a Mechanical Engineer out of UCSD Jacobs School of Engineering and heads our research and development robotics department.

So, do you believe after what happened to me that I could have accomplished all of the above in a matter of 6 months?

OBVIOUSLY NOT! Things like this take time.

Jerry Glaser has been at our facility, knows what we are doing and where we are going and he believes we did the right thing.

Please remember that although the United States is the biggest tool market, it is NOT the only market. I have been selling tools to Europe successfully (by the way they pay in euros). Besides, when our tools hit the market again, it will have the proper structure behind to attend your smallest request.

Aluminum Handles, Cryogenic Treatments, Lead Shot, No Roll Design, A11/CPM10V have ALL BEEN DEVELOPED, RESEARCHED and TESTED by Jerry Glaser (http://www.glaserhitec.com/background/background.htm). Flute designs have been around for God knows how long, grinding angles... well everybody has developed one. Heck, they even say that 40 degrees is the best grinding angle because beavers have 40 degree angled teeth..... go figure....

How would you feel if Sam Maloof left you his company and name, and all of sudden you were confronted with money issues, the terrible economy and lack of operating capital?? How would you explain to Maloof's family that you were not able to produce a rocking chair?

For the longest time I felt really bad about the turn of events, but I decided to create my own reality and my own structure first. I start working at 4:30AM and finish at 5:30PM M-F and Saturdays 1/2 a day. The tool company structure now comes from my aerospace business, where I have buying and manufacturing power. A place where I can manufacture a tool that is commensurate to Jerry's name and proven quality.

I DO NOT depend on manufacturing tools to make a living. I just want to be able to help people, foster woodturning among young kids and be respected for a good effort. (see my pictures on www.glaserhitec.com)

So, I respectfully ask you all to remember that I have not destroyed Jerry's name just because you saw me at the AAW show and after that I did not sell tools. At that show, I donated a substantial amount of money to the AAW on behalf of Jerry Glaser, I donated tools to kids, I even gave a large amount of tools to people that came to my booth.

Since then, the woodturning world has seen the appearance of Doug Thompson, who realized that Glaser tools were not being made, so he went out and made tools. In the beginning he was offering then as a replacement for Jerry's handles... Use his handles and install my blade in it. In a world full of plagiarism, I can say I was not happy with the turn of events, but then I realized something:

THIS IS AMERICA PEOPLE THE LAND OF OPPORTUNITY!

I have a great relationship with Doug and have told him that I wish him the best. To say his tools are better than mine or worse than mine is ridiculous, because Doug has been smart enough to take the best of Glaser tools and add his own touch to it and manufacture a good tool that people can use and probably pay less for it. That my friends is THE AMERICAN WAY! Doug: Whatever I can help you with, just call me! I will always wish you the best.

So, in 2010, I plan to come back... stronger, definitely wiser and for sure with the intention of making good quality tools. At the same time, I hope to FUND some upcoming woodturners out there and still work with the ones who have been buying Glaser tools for the past 40 years. I thought about listing the professionals who have used or use Glaser Tools, but to be honest, I would have to create a long scrolling page for people to read... there are literally thousands out there, and I plan to increase that number.

In essence, Jerry Glaser is a legend. I spoke with him today and asked him to come in again, because I need to discuss the next batch of tools and to inspect the final revisions of our CryoSteel line. He assured me that as soon as he gets better (had a cold), he will come in.

I would like to express my gratitude to Jimmy Clewes, Bonnie Klein, Mike Mahoney, Jacques Vessery, Alan Lacer, Bin Pho, Eli Avisera, Christian Delhon and especially my dear friend Alan Batty who has been instrumental on our comeback. I spent the weekend with Alan and I can tell you that he is absolutely without a doubt a phenomenal woodturner... the only woodturner in the world who can claim that he went through an apprenticeship. Alan started turning at the age of 15.

Ellis, thanks for the opportunity to express myself. I will definitely line up our advertising within the next 30 days.

Happy New Year to EVERYONE!

Paulo Marin

Re: Glaser/CET/Cryosteel Gouges ? ? ?

#23

Re: Glaser/CET/Cryosteel Gouges ? ? ?

Ed Moore in SW VA

>Paulo,

I wish you the absolute best as you start up production of the Glaser tools again. And I hope that you have smoother sailing this time.

Respect the bandsaw,

Ed

Re: Glaser/CET/Cryosteel Gouges ? ? ?

#24

Re: Glaser/CET/Cryosteel Gouges ? ? ?

Paulo Marin

>Thank You Ed! I appreciate your comment! I will do my very best!

-Paulo

Re: Glaser/CET/Cryosteel Gouges ? ? ?

#25

Re: Glaser/CET/Cryosteel Gouges ? ? ?

John Scheideman

>Rather than bashing anybody I would think that all woodturners would be excited for the return of Paulo's turning tools. As Doug said, competition is good for all of us. We will only benefit from having more manufacturers and more choices. Now, if only I had the funds to support them all! Good luck with your return, Paulo. I am anxious to see what both you and Doug come up with this year.

John