Re: reply
Wiley Horne
Bill,
That would be a wonderful experiment, especially because of the whimsy. Maybe we could get David to do it. Some guys at forest products lab back in 1941 decided to compress some 26% wet hickory sapwood—maybe this had to do with engineered wood. Anyway, they compressed at various temperatures, at up to 4,000psi, and got the hickory to compress to 60% of original at max. pressure, and it was going asymptotic with pressure at 40% compression.
I just did something way less rigorous, which was to go mark out one socket, saw and kerf it, and chisel out the waste. Took a minUte maybe to do the whole thing. This was a 12-13 thousandths saw kerf, a blued M2 kerfing tool a little skinnier than the saw kerf made from a short length of planer blade, and assumed a 3/8” drawer side for the depth of kerfing. My only caution as a result is that I would have marked the kerfing tool at 3/8” when doing it for real. Because it’s so easy that one could overdo it. You’re driving the tool down into the whole length of the drawer front, so there's no real splitting danger. But still....it’s best to stop at the drawer thickness depth.
The other thought is that you want to take it easy, because let’s say my tool cross section is 12 thousandths, multiplied by an insertion advance rate of 1/8”. That’s a cross section of 15 ten-thousandths (0.0015 sq.in.). So if you hit the tool with an effective force equal to a static weight laying on it of 15lb, which is a pretty light blow, then you’ve exerted 10,000psi of compaction force onto the wood under the saw kerf. It don’t take but one of those, maybe two, to get to depth.
Derek’s kerfing tool looks pretty precision to me, somI would hazard a guess that he is getting on the order of 90-95% compaction, and 5-10% side compression. In my case, it’s probably more like 60% compaction and 40% side compression. But at 3/8” travel how much should we be worried? I like the look of Derek’s pins when he’s done, and mine looked OK too.
So we’re not going to get “area man achieves cold fusion in workshop and vaporizes Pittsburgh.”
Wiley




