New WoodChat!
Home Articles Forums Gallery Marketplace Videos

WoodCentral Forums

Knowledge You Can Build On — Est. 1998

100+ Wood Species + Full-Shop Services: Lumber, Veneer, Tools & CNC. Everything in One Place.

An ordered approach to fitting tenons?

Posts

Re: An ordered approach to fitting tenons?

#76

Pencil options

John in NM

You could try an old draftsman's lead holder and pointing tool, they are still available on Amazon surprisingly. The lead is quite large, maybe 1/8" and a good pointing sharpener works very well on them.

For sharpening wood pencils, I prefer the Boston self feeding crank sharpener (long gone now, but readily available on ebay). I actually prefer a sharp chisel, but my wife hated how there was never a sharpener in the shop so I got one for her to use and now I use it too. Only reason I knew about those Boston sharpeners was that all the draftsmen used them at my dad's office when I was a kid.

Re: An ordered approach to fitting tenons?

#77

Re: Example?  Photos

TomD

That is a common problem in my shop, William, finding the stuff... I guess if I am not going to get rid of the small machine it should fix the hold down, it isn't really a problem, it is a Jobsian "bad experience". You know, something completely trivial that could work better, but if you life is composed of such details...

Re: An ordered approach to fitting tenons?

#78

Re: Example?  Photos

TomD

Thanks John. Actually my big machine works great, I just can't be bothered to unearth it. Problem with big woodworking machines compared to big metal working machines is big woodworking machines need a lot of space. My mortiser is on a base I welded up, but a mobile base still assumes there is somewhere to move the machine to. Far almost any task it is easier to just use the small machine, and it turns out nice parts.

Re: An ordered approach to fitting tenons?

#79

alternative view of the cross vise-negative

Bill Tindall, E.Tn.

In theory a great idea. I have one and found it to be ineffective. No doubt had I bought a pricy American made cross vise it may have worked. But I bought an import from Enco. It wants to move while drilling something held in it. The solution is locking down the jibs, but that is a nuisance for drilling each mortise hole. Also the jaws really are not large enough for table legs and other stuff one may want to mortise. In any case it did not live up to my expectations.

Re: An ordered approach to fitting tenons?

#80

Re: Estimating the width of a pencil line

Kevin French

Bill I use #4 they are a lot harder and keep point longer