New WoodChat!
Home Articles Forums Gallery Marketplace Videos

WoodCentral Forums

Knowledge You Can Build On — Est. 1998

200+ woodworking book reviews

Tool needs

Posts

Re: Tool needs

#51

Re: Good one, Charles ....

Derek Cohen (in Perth, Australia)

Hi Charles

Do it this way ..

Go to the image you wish to post. Right click on the image (I use a Mac but it is the same as a PC). Copy "Copy image".

Type [img ] .... paste the image address immediately after this, and then immediately type in [/img ]. Note that the items must not be separated (as I have deliberately done here so it will show on the screen).

For example, this was one of your images ...


It would look like this when pasted ...

[img ]http://asimg.artsolution.net/tsmedia/phillipsronaldRonphoto/PhillipsLtd752013T15730.jpg?height=620&width=1000&mode=max&quality=70&format=jpg[/img ]

You can post as many as you wish this way.

Regards from Perth

Derek

Re: Tool needs

#52

Re: A furniture maker and his tools ...

david weaver

Looks like a bit of indulgence there, even though he is a professional.

However, it's his shop, his money, his time and he certainly didn't take any of my tools to fill his walls, so I couldn't for a second imagine being presumptuous enough to tell him "yeah, that's the right way" or "that's the wrong way, you're a collector and now you have no credibility".

Re: Tool needs

#53

Re: A furniture maker and his tools ...

roger lance

Derek....Finally, a woodworker with more tools than you!! :D :D :D

Re: Tool needs

#54

Re: Disagree

Tom

"Recently began to play a guitar. Takes a little bit of manual dexterity and some desire. The same two ingredients required to become a cabinet maker. Want to and the perserverance that want to produces are the keys to both."

That over simplifies. Some activities are dumbed down, T-ball for instance. Hitting a moving ball sent by a great pitcher is harder. It is just a fact that woodworking is an activity designed for the masses. Maybe working high steel is a thing not everyone can do, but most construction labour is something anyone with an able body could do. To be a combination of a great maker and Sheridan, might be a little more difficult, but they sensibly separated out those two classes of work. Woodworking is for dummies. Art is a matter of communication not just notching out the end of a board. If your current guitar skills are at a level where diligent application was the only thing that mattered, then you either aren't very good, or you are very gifted. Everything seems equally easy to the extremely gifted.

It should be pointed out that hobbies are often nothing more than someone else's low level job done by an amateur in their spare time. Consider hunting (actually very difficult in many situations). But every pre-literate shlub had to hunt. But it is an interesting activity when undertaken part time by a better educated kind of person, who can structure it with rules, and recite poetry and driking songs etc...

You can make hunting pretty difficult, but at the end the animal dies and it's over. Trophy hunting harder still. There isn't any limit to how good a song you can play, it is open ended. In theory woodworking could be open ended, but there is always someone like Bill (whose current level of play is actually pretty fancy), prattling on about how they have to make a buck, or how the seats on the chairs shouldn't slope so steeply that people slide off them. Economic, class, and style conventions seriously restrict what can be done.

"There is a level that cannot be learned. It is achieved through pure talent. A good coach can produce very good basketball players out of young men with some desire. Only God can produce LeBron James."

You are making my point. If B ball were dumbed down to the point where it involved either team taking turns carrying a ball to a pail and dropping it in, no extreme skill would make any difference. That is basically woodworking. The extreme level at which B ball is actually played is only possible for those with many different gifts. Startling size is an advantage for many, ability to read play, etc...

Re: Tool needs

#55

Re: A furniture maker and his tools ...

Tom

"As far as I am concerned, it is not about having many tools. Whom am I to say what one should or should not have? It is not even important what you do with them. It's just a hobby."

That is because as usual we are gloriously off topic. Bill asked what was required. Possibly in particular for those starting out. Secondarily, how to avoid repeating the mistakes of acquiring stuff one doesn't need in some particular predictable pattern. I think nobody needs to hold back their opinions on that. In your situation you might have an opinion on whether it is reasonably possible for people to repeat typical patterns of behaviour. I'm sure it could be, say if getting into woodworking were controlled in some way approximately close to getting a pilot's license. But in our case it isn't.

I have recently thought that the upswing in interest in hand tool woodworking, typically an ugly step sister, is at least 50% because of the recent availability of all these tools. For one thing, you don't exist in the magazine world without some product to underpin the activity. For many decades there weren't decent tools to buy. But also, people do want to buy stuff and are attracted to new opportunities to empty their wallets, particularly in the case of some, if a practical veneer can be laid over the habit.

I have often entered a hobby through the minimalist door, and then added layers of tools till I had tried that, and then even gone off into different schools. It is possible to not only do it simply, but complexly, and in many different modes. I'm not sure Bill's head has expanded to that possibility yet, but I want to be standing behind the splash curtain when it does.

Re: Tool needs

#56

Re: A furniture maker and his tools ...

Kees

What do you really need to make some simple woodworking projects from left over bits of wood?

Something for measuring and marking. A tapemeasure, a square, a pencil and a utility knife.

Something to cut the boards. A hardpoint saw.

Something to dimension the wood accurately to thickness and width. A Stanley #4.

The joinery. One or two chisels and a small backsaw is nice.

Grooves and rabets. Either with the saw and chisel or invest in a Record 044 and a wooden rabet plane.

And a lot of sandpaper to hide all your mistakes. That's about it. A hammer is usefull too of course.

What did I forget?

Re: Tool needs

#57

Re: Good one, Charles ....

cstanford

I appreciate it. I still need to clear up my profile/login information before this will work I think.

Re: Tool needs

#58

Re: A furniture maker and his tools ...

cstanford

98% molding profiles and he was happy to admit he had a *bit* of an obsession.

Re: Tool needs

#59

Re: Any of us of course...

CStanford

It's hard to compare the performing arts to other artistic forms.

Re: Tool needs

#60

The obvious reply...

John in NM

Is, yes, practice. Who springs from the womb able to build masterpiece furniture? :D My sympathy goes to anyone so practiced that they cease to learn a thing or two while building, sounds awfully dull.

The piano is a red herring, the simile too much of a stretch to be useful.