New WoodChat!
Home Articles Forums Gallery Marketplace Videos

WoodCentral Forums

Knowledge You Can Build On — Est. 1998

If you sell to woodworkers, your customers are already here

(Message Deleted by Poster)

Posts

(Message Deleted by Poster)

#1

David Barnett

(Message Deleted by Poster)


Re: (Message Deleted by Poster)

#2

craigd

Better round than rectilinear


Re: (Message Deleted by Poster)

#3

Re: Sir William throws down–——the gauntlet

CStanford

You dislike Sheraton's turned/turned and reeded legs?

Re: (Message Deleted by Poster)

#4

And who are you again?

Richard Jones

And, of course, nothing gawdy or worthless was ever turned on a metal lathe......

This self-justification to excuse the lack of a particular skill set does not become you, sir.

Rectalinear, indeed.

Re: (Message Deleted by Poster)

#5

There are some things that are better round

Patrick Gibbons

No matter how much she insists she's getting fat.

Re: (Message Deleted by Poster)

#6

Clint Searl

Hear! Hear!


Re: (Message Deleted by Poster)

#7

Treadle lathe group build?


Re: (Message Deleted by Poster)

#8

Re: Sir William throws down–——the gauntlet

Jim Crammond

David,

While your comments about many styles of turned legs may be true though a matter of personal taste, to eliminate all round legs would be a travesty. I seldom see square or rectangular legs in nature. What is the shape that attaches you feet to your body, square?

Another reason for turned legs and parts is the convenience of joining them together, it is much easier and quicker to make an accurate round mortise and tenon than a square one, in my opinion.

Jim

Re: (Message Deleted by Poster)

#9

Re: There are some things that are better round

CStanford

I agree. I watched a movie last night with Jennifer Lopez in the cast. Round is good.

Re: (Message Deleted by Poster)

#10

Re: Sir William throws down–——the gauntlet

CStanford

Wood indeed likes to be round. It's its natural state.

Re: (Message Deleted by Poster)

#11

Re: Sir William throws down–——the gauntlet

Ron Harper

I heard a guy once have a small group of folks enthralled , telling them that researchers were working on the development of square trees to make them easier for the lumber industry to handle, and to reduce waste.

Re: (Message Deleted by Poster)

#12

Re: Sir William throws down–——the gauntlet

William Duffield

OK, and probably he also claimed that all the lumber that came out of them was quarter sawn :D Of course, you'd need to do an environmental impact statement, and proving there were no adverse effects on the poor, confused squirrel and woodpecker populations would be a stretch.

Re: (Message Deleted by Poster)

#13

Re: Sir William throws down–——the gauntlet

William Duffield

Well, there are some people who should probably never be allowed near a lathe, like those who have cut off fingers on their power tools on multiple occasions. Even a great wheel lathe can be deadly in the wrong hands.

BTW, when I turn, i do "throw down the gauntlet." I will not wear a glove, on either hand, when turning. It's too easy for it to get caught on a splinter and pull your hand in between the stock and the tool rest.

Re: (Message Deleted by Poster)

#14

Be nice to those beer tap handles...

James Watriss

They're not actually lathe-turned. Not traditionally, anyway. As it was relayed to me, cabinetmakers of olde would go to the tavern after work, drink until the room was spinning, and used that motion to shape the tap handles. All they needed to do was hold their pocketknives out, and the room would do the work.

At some point along the way, one of the apprentices (as the story goes) tried to show off his drinking prowess and lost his balance. (Or was pushed, depending on the version being told.) As he fell, his (still sctively cutting) carving knife ran down the handle blank, resulting in a spiral shape that has since become known as the barley twist, which is an aberration of a wholly different kind.

Or so the story goes...

Re: (Message Deleted by Poster)

#15

Leo Cuellar

I think your holding back... tell us what you...

Leo Cuellar

really think David! :D

That is how I felt about turning when I was in high school and had the (missed) opportunity to learn from someone who actually new what they were doing. 35 years later I've come full circle, so to speak, on the issue. I now have three lathes and still need a metal lathe and am also considering making one primarily of concrete, go figure! Many of my opinions still match yours though :b ROTFLMAO!

Re: (Message Deleted by Poster)

#16

David Barnett

(Message Deleted by Poster)


Re: (Message Deleted by Poster)

#17

Re: Sir William throws down–——the gauntlet

CStanford

A round table leg of similar dimensions as something rectilinear will move much less, won't bow in its length or twist as readily.

There may be a lesson in there somewhere.

Re: (Message Deleted by Poster)

#18

Re: From where I sit today...

david weaver

..not at work.

I also see no round legs.

My eyes are pleased.

That doesn't mean I see no curves, it just means I see no turned legs. No windsor chairs, either.

I do have a wood lathe. It would need an extension to do a table leg. I'm not motivated to get one. Having something to turn knobs (which is something I seem to do only for other people) and tool handles is enough.

I hate pens, bottle stoppers, wooden cup kits and any of that stuff that exists out there like that.

Re: (Message Deleted by Poster)

#19

Bravo!  Good story!


Re: (Message Deleted by Poster)

#20

You left out Ruhlmann

Bill Houghton, Sebastopol, CA

Hard to imagine his work without those torpedo legs. That said, I'll be referring to Methuselah as "that young whippersnapper" before I make any Ruhlmannesque pieces. I find them too precious by far more than half.


img

Re: (Message Deleted by Poster)

#21

David Barnett

(Message Deleted by Poster)


Re: (Message Deleted by Poster)

#22

Re: Sir William throws down–——the gauntlet

William Duffield

Thanks, Wilbur

Ethan Allen

From giant Cypress

Seriously, does anyone in his right mind actually wear a tool belt while building furniture? OK, installing built-in entertainment centers and kitchen cabinets, maybe, but not quality wooden chairs.

…one man, trying to find the answers to life's persistent questions :D

Re: (Message Deleted by Poster)

#23

Well Norm always did.....but

roger lance

the purpose of that was to remind people that he was a carpenter building furniture.....say what you will about him, he was and is in his right mind.

Re: (Message Deleted by Poster)

#24

Re: Well Norm always did.....but

William Duffield

Really, I have a lot of respect for Norm Abram, and learned an immense amount of woodworking from him. I didn't always agree with his methods, or at least decided I would do it differently. I'm just stirring the pot here, trying to help people to think about what we do and how we do it. I find it as difficult to put on my tool belt when I go out to do carpentry as I imagine Norm does to take his off when working in a shop building furniture. As I mentioned on another thread, I also can't work out of a tool chest, even though it has many advantages over working off of racks and cabinets hanging on the shop walls, but I'm beginning to learn to work efficiently out of a stack of systainers. :D

Re: (Message Deleted by Poster)

#25

Yabut, without round,

Bruce, a MN Galoot

you wouldn't have, e.g.,

round tuits

theater in the round

Beach Boys (I get a round)

roundabout ways

of course, I don't know how many of these are made with a lathe, but...

A lathe is handy for making stuff. I just repaired a rocking chair by replacing a spindle keeping the arm from crashing into the seat. That would have been ever so much more difficult without a lathe. And while the style that prevails in our home runs more toward Shaker and Mission styles, round has its place. It's going to figure heavily into a rocking chair for our granddaughter for her second birthday.

Besides, a lathe is a much bigger time waster (giving the appearance of being productive without actually making anything) than any other tool I know. That alone should count for something.