New WoodChat!
Home Articles Forums Gallery Marketplace Videos

WoodCentral Forums

Knowledge You Can Build On — Est. 1998

ADVERTISE HERE - FREE TRIAL

"What Are You Working On"

Posts

Re: "What Are You Working On"

#26

That's very clever


Re: "What Are You Working On"

#27

Re: Oh, but it's the berries...

Derek Cohen (in Perth, Australia)

All excellent points David.

I wasn't seriously suggesting that the berries be left off - simply that Bill's work is so good it can stand alone.

I will post what I have done of the lapdesk at the end of the weekend. I'll have something substantial by then. At present I am having fun making a secret compartment :)

Regards from Perth

Derek

Re: "What Are You Working On"

#28

Re: "What Are You Working On"

CStanford

I think the execution is technically stunning but the stringing would have looked better with just the central stylized diamond and the two tulips. The not-quite-complete circles and the lines springing out of the tulip bulbs make no sense to me even given the artistic license that stringing can present.

With those left out, the rest of the stringing would have looked better just a slight bit wider and therefore bolder. The carcase appears to be fantastic.

Re: "What Are You Working On"

#29

Re: Oh, but it's the berries...

CStanford

Very nice how the finish, time, and grime put dark outlines around the stringing. Makes all the difference in the world.

Re: "What Are You Working On"

#30

Re: Oh, but it's the berries...

CStanford

Love the width of the stringing.

Re: "What Are You Working On"

#31

Started a lapdesk

Derek Cohen (in Perth, Australia)

I've been interested in military/campaign furniture for some years. Some will recall I built a set of chests about 18 months ago. The opportunity to build a lapdesk presented itself very recently as I was left with the smaller section of this box after using the larger section for my plough plane.


The dimensions are pretty close to what I needed. My plan is to be inspired by tradition, but it will have a contemporary interpretation as the wood used is not typical. Anyway, it is for my own use, and will house my favourite ink and fountain pens.

There is much to do. This is as far as I have got ...



There are two drawers, space for two pens at the top and ink, and room for the iPad (which is why the console is floating).


There will be more built in, which I will leave for another time. One item I will show is a secret compartment, which was fun adding today ...

There will be a lid over the console, which is hinged from the rear. This is raised to access he ink and pens without disturbing the writing area. When this is raised, it is possible to remove the console by lifting it vertically (it is attached to the base on steel pins) ...


Regards from Perth

Derek

Re: "What Are You Working On"

#32

Re: Started a lapdesk

CStanford

Deeper than most but I kind of like it.

Re: "What Are You Working On"

#33

Re: Started a lapdesk

Derek Cohen (in Perth, Australia)

Thanks Charles.

Actually it is small by comparison with this tradition one, which I think is just amazing ..

http://www.hygra.com/wb/wbagsec.htm


That one is 21" wide x 11-1/2 deep x 8"high (closed).

Mine is 15" wide x 11-1/2" deep x 5 -1/2" high (estimated when complete).

Regards from Perth

Derek

Re: "What Are You Working On"

#34

Re: Started a lapdesk

jack curtis

Based on my experience with ink bottles in my early years, I'd caution against ink and iPad (or any other electronic device) cohabiting. Aside from that, cool looking box.

Re: "What Are You Working On"

#35

Re: Lap desk? ... More like ..

Bruce McCrory

... "Loo-leg" in reverse. (Coined that word. "Loo" sounds better than toilet.) I can see (feel) myself stumbling around with thighs and knees abuzz after ten minutes of that on my lap! :(

Re: "What Are You Working On"

#36

Re: Lap desk? ... More like ..

Derek Cohen (in Perth, Australia)

Actually Bruce, I do not know why these things are called "lapdesks" as they are really portable writing desks that are set up on a tabletop. There will be a lid that folds out to double the writing surface. You would not want to do that on a lap!

Regards from Perth

Derek

Re: "What Are You Working On"

#37

Re: Lap desk? .....

roger lance

Derek....there is a somewhat famous drawing of our President Jefferson riding in a horse drawn coach and writing on a lap desk.....perhaps someone might put it up....I'm under the impression that this was what associated the name to such projects.....of course, this could all be nothing more than American lore.

Re: "What Are You Working On"

#38

David Barnett

(Message Deleted by Poster)


Re: "What Are You Working On"

#39

Re: Started a lapdesk

CStanford

Aha,,, very nice.

Re: "What Are You Working On"

#40

Re: How do you "geld" a lily?

Bruce McCrory

Horses ... But, not lilies. Maybe, pinch their nxts?

Re: "What Are You Working On"

#41

Re: Lap desk? .....

Bruce McCrory

From what I recall, Jefferson's "lap desk" was far less elaborate than most of those shown on Derek's link page. Really fascinating look-through of the desks featured, btw.

Re: Loo-legs reply. Do Ausies deadpan humor? ... Or, would that define mine?

Re: "What Are You Working On"

#42

Re: Lap desk? .....

William Duffield

A description of the building of a reproduction of the Jefferson lap desk can be found on the Philadelphia Furniture Workshop's blog.

http://www.philadelphiafurnitureworkshop.com/blog/?p=330

Re: "What Are You Working On"

#43

A pair...

david weaver

A pair of H&R #12 size. Need them quickly. They look old and dirty, but that's just discoloration in the beech. Apologies for the bad/late at night pictures.

Mindlessly made as per (what I could remember of) the instructions provided by Larry on his DVD, save the irons. Those are cut from flat stock and tapered in a jig on a belt sander.


Re: "What Are You Working On"

#44

craigd

Re: A pair... : Nice! I want


Re: "What Are You Working On"

#45

David Barnett

(Message Deleted by Poster)


Re: "What Are You Working On"

#46

Re: How sweet it is!

Derek Cohen (in Perth, Australia)

And I could cast the pounce pot and inkwell in pâte de verre, too! What am I saying? I'll never do any of it and doubt I could execute the dovetails nearly so well as you. No, I'll just sit here and look at the pictures, light up my favorite Oom Paul, then sink into another Booth's & bitters and dream of blood, sweat, honor and finally annexing the Transvaal.

I'm sorry—but when I see stuff like this I just go all J. Peterman

David, I came across this photo of you in an 1899 edition of The Star.


No mention there of Booth's & Bitters. The tipple of choice appears to have been Brandewyn.

Here's a story for you: http://www.inthewoodshop.com/Commentary/APlanefromMatjiesfontein.html

Regards from Perth

Derek

Re: "What Are You Working On"

#47

Re: Only as far away..

David Weaver

.. as about 7 or 8 hours of work, as long as you have the floats. I know you've got a mill, you could make those, and they're a quick piece of cake compared to an infill. I wouldn't like to make a moving fillister like Larry makes, or a plow, either, but these are no problem.

They probably take me between 8 and 10 a pair, I don't have most of what you'd need in terms of power tools (metal or woodworking), the belt sander is about it to add a small taper to the iron.

It was much harder for me to find beech early on, but now i'm on the call list for a lumber guy who cuts a lot of QS beech, and he delivers local. This is from drawer stock to be resawn, I should've used some of the better wood he's sold to me, but I'm saving it for something, I just don't know what.

Re: "What Are You Working On"

#48

Re: Started a lapdesk

Patrick Gibbons

Really like the way you connected the console to the body. You already know, perhaps, I am a big fan of secret compartments.

Re: "What Are You Working On"

#49

Impressive David how quickly you put these togethe


Re: "What Are You Working On"

#50

Re: Started a lapdesk

David Weaver

Very nice, Derek. You seem to have an unending appetite for very precise work.