We value your privacy.
We use cookies to enhance your browsing experience, analyse site traffic, and personalise content.
By clicking “Accept all”, you consent to our use of cookies. You can also choose
“Essential only” or learn more.
As noted below there is nothing like posting something you are working on to get a discussion going about the different ways to do it. So, after the rush of Christmas is anyone working on anything or are we all recovering? Maybe we could amend this addition by adding "what did you get for Christmas".
Now that all the distractions are over I'm back in the chair shop. Steamed back rails for two of the three fan backs I'm building. I built a new,more efficient kiln to dry chair parts in. This should be a very productive winter.---Jack
My youngest is a new third grade teacher and she has requested a standing magazine/ book rack for her room. Tool storage for my shop. And a standing jewelry storage unit for SWMBO.
Reclaiming the cast iron soles of a few trashed hand planes as lapping plates for diamond paste and generally trying to pare down /better organize my sharpening systems. Making small wood boxes/platforms around the plane soles would be the woodworking portion of what I making.
Oak accent lamp as featured in Popular Woodworking mid- 2012. Frame and legs are glued, top to be affixed, electrics wired and stain (aniline dye mix, Watco, Kiwi brown shoe polish) applied. I have to cut the thin mica for the panels. Does anyone know if I can score this with a utility knife? I don't want to use the table saw.
In no particular order, I have quite a few projects I'd like to finish this new year. A coffee table, storage under the drill press, reorganize my shop, a tool chest, build better versions of my Christmas presents I made and I have accumulated six tool projects in kit or raw material form that I need to build. These include two planes, marking knife, turning saw, stair saw, spokeshaves and, Great Scott!... That's more than six projects and doesn't even include the other tools I'm thinking about making.
When Sandy came through this area a couple of months ago it brought down a good sized black oak in my neighbor's woods. I cut a section about 40" long, split it, and have it stacked in my yard for the winter. I am working on a carved box, ala Peter Follansbee, this one about 17x9x6 with a till inside. This is just from 1/8th of the section I cut and split; another 30 feet of this tree is still on the ground.
Handsome piece. I like the proportions. The color and grain compliment the style. The top looks to be assembled from two pieces? If so how does one edge join wet wood? And if pined in place, why won't it split when it dries out?
Anything you want to do, you have to do something else first. So I'm building some clamp racks, while recovering from a glue-up, as I reported in the thread on Plano Racks. Hopefully these will keep me from dropping any more Bessey K-bodies on my head.
Over the holidays, I built a small Shaker table out of tulip poplar, to put under a compact refrigerator. It goes in a closet, replacing an under-utilized full size refrigerator, so my FIL will have more room in the closet for more useful stuff. Since it will probably never be seen again, materials and finish play second fiddle to sturdiness. Traditional construction methods also were sacrificed to efficiency and speed of completion. Regrettably, distractions being what they are, I have no photos of either the construction or the finished table. I used my power jointer and planer, a plethora of Festools, and a new leg tapering jig I built for my table saw. The taper jig is based on Steve Latta's design, published in a recent issue of FWW, with a few minor improvements. The jig works very well. That gizmo I have photos of, if anyone is interested.
The seven surviving busy-tailed tree rats that have been raiding my bird feeders did not have so merry of a Christmas, as we replaced the bird feeders with two that are squirrel-proof. Hopefully they will lose some weight and the reduction in the cost of bird seed will eventually cover the cost of the feeders. I'm building a new pole to suspend them from, that makes the squirrels reach far enough that they cannot defeat the security system. The pole has some trivial woodworking content. Installation will have some hand tool content (a level and a post hole digger ). Now, I only have to worry about exhausted batteries and frozen up electronics and mechanisms.
I'm participating in a group build organized by my not-quite-local woodworkers guild. We will be building reproductions of a William and Mary Chester County Bible Box with a veneered front and inlay banding. Hopefully we will show all the participants the advantages of hammer veneering with hot hide glue, and no one will be exposed to formaldehyde or contact cement. To that end, I'll be showing some of the others how I build veneer hammers. First meeting is this Saturday. It should be an interesting experience, involving real cabinetmaking and hand tools, and teaching and learning of techniques.
Wife noticed you clamp post (the head incident) and asked what a K body was. then we watched Rough Cut (that largely annoying advertisement for Woodcraft machines) last night and she saw one. He comment was , "no concussion?"
Luckily, no concussion. They were 12" (effective length) clamps, and only fell about 4" before their acceleration was interrupted by my head. I blame the accident on global warming, with hand tool content. As I assume everyone is aware, we've had more than our share of bad weather in 2012, much of it resulting in downed trees at the Loxahatchee Toolworks. I hate using a chain saw, and thus have been chopping them up and splitting them with axes. This has led to RSI in my left elbow, so I used the right arm, which is not as coordinated as my left arm, to lift down a couple of clamps to glue up the Shaker table frame, knocking the two clamps next to them from their precarious perch. In addition to the travel time and waiting time in the ER, my wife and I both lost some sleep, and I picked up a couple of bugs from a waiting room full of sick kids. I'm lucky the table will reside in a closet, because to get it delivered in a timely manner I took some shortcuts on the finishing process, which will need to be corrected before I can ever use the table anywhere else.
In what ways do you consider the design a failure? The proportions are pleasing, and they appear to be structurally sound.
They're not nearly as boring as the massive refrigerator support table I built but am reluctant to show. Anyone who professes a love for Stickley or Shaker styling would be fawning over them
Is the wooden portion of the top an open frame? What do you use to attach the tiles (or stone) to the frame?
In what ways do you consider the design a failure? The two renditions scrapped were a failure.
Is the wooden portion of the top an open frame? NO I frame a piece of 1/2" quality plywood with a frame and set the tile on the plywood surrounded by the frame. What do you use to attach the tiles (or stone) to the frame? Embarrassed to respond. Traditionally Thinset. This time Liquid Nails because I had some. Then ran out and the second tube was too viscous to use. Finished up with butyl gutter patch.......because I had some at hand.
We like tray feeders and had suffered from a plethora of those bushy-tailed critters. My LOML was browsing Pinterest one day and saw that someone had suggested using a Slinky around the feeder pole to deter the little buggers. So we put one on the post and wired it to the top so it wouldn't drop. Lo! and behold! a squirrel walked up to the pole, looked at it and walked away. Not ever have they been on that feeder. Now there's ever so much more for for the chickadees, which we feed year-round.
Embarrassed? I've used hot melt glue. Now, that could be considered embarrassing, but I figured if I ever broke a tile or had to repair the finish on the frame, it would be easy to take apart, and if I spilled something on the tile, it would just run through and not permanently establish itself between the tile and the frame. What I built were only hot plates, without the legs, and I put a muntin between the individual tiles for additional support, so I figured I could get away without using plywood sub-panels. Also, people have a tendency to flip a hot plate over to see the bottom, and I wanted to have access to the maker's mark.
Ingenious! I'll try the Slinkies. Steel or plastic? Maybe I won't have to retire my existing feeders and feeder poles. I'll keep the new ones, too, since we have lots of birds that need to be fed. It's a lot warmer here in south Jersey than in Minnesota, so many more species stick around all winter. In addition to chickadees, we have titmice, goldfinch, house finch, cardinals, nuthatches, redwing blackbirds, red bellied and downy woodpeckers and mourning doves. Some are gone during a couple of the coldest months, and many others show up in the warmer seasons. We feed them all year.
Actually, we also feed a few hardy house finches, cardinals, nuthatches, junkos and blue jays, but mostly chickadees. They have such an interesting feeding etiquette.
Also bald eagles, but they don't land on our feeder.
mostly i'm just recovering from december's manic christmas present manufacturing, which was followed by two weeks of travelling. one present made was a walnut box with slanty dovetails, designed to hold records. almost everyone else got cherry picture frames with a chip carved border. i had never chip carved before, so this was a daring gift idea but it worked out well.
i got a nice bench grinder for xmas, which i'll have to make a stand for pronto. currently, i'm in the middle of machining a couple steel honing plates so i can try sharpening with diamond paste. i'm also making up a set of irons for my stanley #46 plane.
oh, and earlier today i taught my dad how to sharpen his chisels and plane irons. he's a long time power-tool only woodworker, but i'm slowly corrupting him.