We value your privacy.
We use cookies to enhance your browsing experience, analyse site traffic, and personalise content.
By clicking “Accept all”, you consent to our use of cookies. You can also choose
“Essential only” or learn more.
That item is typical of how I roll. If something goes wrong on a trip, I will custom make something to fix it. Or buy some fancy thing.
In that case, in 05, as I was hauling into Quebec, a couple of very personable road cyclists pulled up and we chatted in french about my trip. They noticed my chain was skipping, from drying out after rain, and mentioned that theirs needed oil also, and suggested I go into the big box and buy a bottle of chain oil that we could all share. Some folks get invited for dinner, while others get to buy oil for other cyclists.
So I decided I had to have a Phils' tenacious holder for my next bike. Not exactly a heroic failure, but one more thing to cross off the possible list of problems, and an amusing occasion to remember with a customization.
I'm not sure the average guy yet knows this is the next frontier of bench making. BoBs, Joinery benches, and the Moxon type deal. Fixturing jigs in general. I'd be interested.
I'm going to be busy this weekend. Next week, I'll get back to more insights into the BoB, or as I like to call it, my Loxiliary Bench (Loxahatchee Toolworks Auxiliary Bench). Someone quipped that it was a Swiss Army Bench, but I rebutted, it's more like a Swiss Cheese Bench. I do like dog holes.
Bona fida excuse to putz around in the garage and produce some merchandising display units for our chocolate bars and assorted items.
Already made two units that went into some fancy-schmancy grocery stores, which are all part of one big chain. The manager from another store saw the first one, and demanded one for his store. Of course he had to have one better, and I played along and measured up his counter space and "took in to account the decor". Made him the second one, and now the the third and fourth stores have gotten wind and want theirs.
The "units" are made of common spruce, a 3 tiered display jobbie that sits on a counter, about 32" high, 12" deep and 24" wide. I decided to throw in some curves and make the thing all curvy. I only have a jigsaw and I don't know if that thing hates me more or I it more, gave up and went for a draw knife to shape the arcs--once sharpened, that thing slices through spruce like butter, and once the edges are cleaned up with a shave, I never even break out the sandpaper.
So, this summer I "Have" to make units 3 and 4, and now the wife is jealous, so I have to make an even nicer one for our store. But since the first two units went out, I've been busy making chocolates to keep it filled, those little units sell more stuff for me!!!!
Edward, I've been a sales rep in consumer goods for most of my career and I can confirm that good merchandising is as important as good product. I would think it feels great to know that you're responsible for product and display. I'll give you my biggest compliment- I'm jealous.
I have two granddaughters and now is the time to make the 2nd toybox (a 2 year birthday present) 20x 20 x 32. Walnut frame with cherry raised panels. Stanley 78's raised the panels and a 45 cut all the grooves in the walnut for them to fit. Various other planes and chisels were also used in the construction.
nothing like shoveling rocks in the historically hottest weather on record....and in a drought too.... .....when fall rolls around, its back to that cool basement wood shop....and I'll leave the yard work behind except for leaf raking and the eventual snow shoveling....
I have two granddaughters and now is the time to make the 2nd toybox (a 2 year birthday present) 20"x 20" x 32". Walnut frame with cherry raised panels. Stanley 78's raised the panels and a 45 cut all the grooves in the walnut for them to fit. Various other planes and chisels were also used in the construction.
Every once in a while I like to take a break from making big projects, and do some small fun kinds of woodworking. This project fit the bill. I didn't have to worry about which mortise chisel to choose, or fret over whether I had my chip breaker set "close enough", or not. All I had to do was cut, sand, paint, and assemble. Simple enough.
And the look on my Great Grandsons face when he got the cars made it all worth while.
I use a meco for welding aircraft tubing, which is what most bike stuff is. I used a MAPP torch to make the red rack, but had I had the meco at the time, I would probably have used it. I also have TIG, but that is a whole other level of comitment, and easily the hardest craft thing I have ever self-taught. Does not seem to be too hard to learn from others, but very hard to self teach. Everyone who works at Bike Friday, has to make their own frame. So being spoon fed the techniques on proven, and pre-set gear seems doable.
I use my forge to heat treat, but a meco would be good, and I intend to try it also. The heat is more directible, which has it's uses.
Is the boat thing the actual pannier you are making, or just a sample of the rib work?
Not too much myself Bill, although I'd really like to be building more of my own stuff, but my students have been very busy as you can see here . The work seen at this link comprises perhaps one third of all the work produced by my students over levels 4, 5 and 6, also sometimes known as years one, two and three. I suppose I have some relevant role in the work produced by my students as I wrote the curriculum, manage the course, write many of the briefs and do whatever else is necessary to keep the whole shebang going.
However, with the college having decided to close down the course in a couple of years, perhaps my future holds more (enforced) opportunities for designing and building furniture of my own again. Slainte.
At this time I am attending a psych conference in Cape Town, South Africa. The airline refused to accept my bench as hand luggage, and looked quite disturbed when my chisels showed up on the x-rays, so all I can do is plan the next piece. It will be my version of this wonderful desk by David Haig (from New Zealand) ..
Regards from a sometimes sunny and sometimes wintery Cape Town
as art. It must be boring traveling around the world and all....don't let anyone talk you into a little swim with the sea lions while you're on the Cape....they got Great Whites there too !!
Well, there's at least part of an article here. In addition to making the hand wheels, there are the desription and pics about attaching the all-thread to the Loxiliary Bench, and making the chop (but most of this can be derived from Jameel Abraham's plans), why this set-up doesn't require a rear chop, and how to size the chop so you can turn it over for marking pins from tails or tails from pins and squaring half-blind sockets, and why you don't usually need some sort of rest behind the vise to support the far end of the board.
I'm working on the exposition, but Bill asked "what are you working on?" and this is what I'm working on right now. I like Bill's question more than the "accomplishments" question on the main board, because this one is so much more process oriented.
The next question for me might be, "How do you get away with only half a Moxon vise?" And, of course, the answer to that is another article, with more assembly pictures, showing the inspiration, history and construction of the Loxiliary Bench, and explaining how to size it, and why I built it, and the parts and materials I used, and alternatives to materials, sizes and construction methods.
And that may lead to yet another question, "How can I use it?" or "What's it good for?" leading to yet a third Loxiliary Bench article, which would include mounting and installation options, work holding arrangements and attachments, portability, and maybe a heated discussion of its total uselessness to those who have seen the light and will only build Shaker style furniture. [I'm away from home, and I can't find the smiley faces.]
And so, you see, what I have revealed here is just the latest chapter in a potentially long, involved series of articles and potential forum conversations. I guess I jumped off into the deep end, but it's a start on what Bill asked for, and I figure all of us owe him a debt of gratitude, if not more, for his considerable contributions.
Hmm, you're logged in with your proper profile name, so you're supposed to see the smileys and be able to upload pix. I'm curious as to what's up with that iPad. I might have to try my wife's iPad and make sure there isn't some built-in barrier here.
I can't see the smileys on my iPad, either. Also I haven't figured out how to upload pics from the iPad - not sure if that's possible, since there's no direct way to link them. The filing system on the iPad leaves something to be desired, IMHO, especially for those of us who like to fiddle with such things.
On the iPad, when I tried to post, I was getting the following message:
"Invalid Password!
"The user name under which you're posting requires a valid password. Please use the "Back" button on your browser to return and provide a valid password. If you have any questions, please send a note to webmaster@woodcentral.com."
So, when I got home from traveling, I had to look up the password on my iMac (obsolete, as of today, since Snow Leopard doesn't support its graphics chip ), go to the WoodCentral page where I update my profile, and enter the password into the iPad. Now, the iPad shows the smiley faces and allows me to enter a reply (this one).
I haven't figured out how to edit a photo on the iPad yet; I guess I have to find an appropriate app to do that. Above, the "Choose File" button for the "Upload embedded file:" option is greyed out, so it appears that iOS doesn't support a file structure, and the only choice is to link to one picture out on the internet.