New WoodChat!
Home Articles Forums Gallery Marketplace Videos

WoodCentral Forums

Knowledge You Can Build On — Est. 1998

Combination Press Plough Plane

Bench build update

Posts

Re: Bench build update

#51

Re: Love is a bit strong ...

TomD

It should be fine so long as you don't have an apprentice cracking a lot of nuts or fairing ball bearing. At least you have built the dovetails correctly should it prove you needed the rod and they come under an excessive load, they can just slide apart.

Re: Bench build update

#52

Re: Love is a bit strong ...

Farkled

Derek, A question and a thought:

Can you add the bolts after the bench build - meaning after you've used it and begin to suspect that joinery alone won't do the job?

The thought is along the lines of form following function. If the bench is more tool than it is furniture then add the bolts and be done with it. On the other hand, if this could be an exploration then maybe go with the joinery only option and see if it fails in use. Failure would pretty much put the question to bed. Non-failure leaves it open (doesn't fail in your use case.)

Curt

Re: Bench build update

#53

Re: Bench build update

Charles Jackson III

Looks good!

Re: Bench build update

#54

Re: suggestion

roger lance

Went to Ace "the friendly hardware place", bought a pack of hose rings, and have placed them on my bench vise handles....took a little stretching to get them over the handle ends but I'm in business....thanks for the suggestion.