Tried using diamond paste on stones... *LINK*
John Aniano in Central NJ
A few weeks (months ?) ago, our own Dave Barnett told us all about using diamond paste on sharpening stones - something he found mentioned on page 32 of the Norton catalog on their website (see link below). Yesterday, I flattened the back and sharpened up a tiny Veritas plane blade (the mini shoulder plane). My trusty soft and hard white Arkansas stones, ones I had flattened about a year ago, were the test subjects. I first tried flattening the blade back on the plain soft stone (no diamond) and it worked as it always had - slowly. I then wiped a tiny bit of 1 micron diamond paste on the stone and wow, did it ever cut! Black swarf showed up on the stone in a swipe or two, showing me that lots of material was being removed, and after a few dozen more swipes, the back was almost a mirror finish! Way better than the stone alone, WAY BETTER!! The hard Arkansas stone with the diamond paste wipe was equally amazing - it also cut quite quickly and took only a few more passes to get the back finished. Focusing on the bevel, a few swipes on both stones made the edge shine.
This is a method everyone should try at least once - I'm convinced! Thank you Dave!!
Incidentally, with such a sharp blade the little plane cut well, but was a bit of a pain to hold: I thought the side hole edges could have been better relieved (or eliminated). I'm used to using tiny planes for making bows, but planing a slot in ebony was tough on the fingers- maybe a topic for another day...
Norton Catalog - see pg 32 "Diamond Lapping"




