Home Articles Forums Gallery Marketplace Videos

WoodCentral Forums

Knowledge You Can Build On — Est. 1998

This is the most versatile work station you will ever use

Just got back from W.I.A.

Posts

Re: Just got back from W.I.A.

#51

Re: It strikes me that you have an opportunity

Monty Bates

>Bill, I think the most fun part of this project is that it does allow one to experiment with surface decoration in ways that other styles never begin to approach.

Re: Just got back from W.I.A.

#53

Re: Clarification

Pam Niedermayer, Austin, TX

>I see, thanks for the refinement. I guess it does mean acceptable to the powers who be in any given area of expertise; but I think of it as a plain beauty/design/build statement.

Pam

Re: Just got back from W.I.A.

#54

Re: Miscommunication?

wilbur

>I think that's what happened -- it looks like Scott was responding to my post.

Scott, I'll just repeat what I said above: In this context, I'm using "design" to be more about the aesthetic choices that are made in a piece of furniture, although I'm fully aware that design does cover the technical aspects as well. Most of the woodworkers in my club are very comfortable with the technical aspects of design, but not so comfortable with the aesthetic choices.

Re: Just got back from W.I.A.

#55

Re: Just got back from W.I.A.

Michael Brady

>Roy, I just re-read your OP about the Lie-Nielsen sharpening demonstration during WIA. You mention using the small ruler on the stone to create a slight back bevel on the flat side of the blade. I believe that you saw the "ruler trick" recommended in connection with plane blade sharpening, not for chisels. L-N, nor anyone I know of, would ever recommend using a back-bevel on the reverse of a chisel. The chisel registers off of the back on almost every cutting or paring operation. Even a micro back bevel defeats the ability to use the chisel back as a registering surface.

Please corrrect me if I am misunderstanding your post.

Re: Just got back from W.I.A.

#56

Re: Just got back from W.I.A.

Roy Anderson

>Your absolutely right. I bought chisels. I watched plane blade sharpening. Sorry if this was unclear.