Home Articles Forums Gallery Marketplace Videos

WoodCentral Forums

Knowledge You Can Build On — Est. 1998

Compare cordless drills on the numbers that matter

Working with leather Qs

Posts

Working with leather Qs

#1

Working with leather Qs

Alan DuBoff

>I just got some scraps of thick vegetable tanned cowhide. This is the thickest pieces of leather I have seen, about 16 oz. I'm going to use it for lining my emmert clone at minimum, but I would like to make some sheats for saws I'm making and/or knives which I forge.

I don't have a stitching horse, but don't need one I don't think, but I was curious if others who work with leather, do the holes with an awl, and then stitch by hand, or do you drill first? I was almost thinking of drilling it as the leather is thick, pretty tough to puncture through it with the awl I tried...albeit not impossible.

This is pretty hefty and durable, will rubbing neadsfoot oil soften it, or is that not good for tool steel? I remember rubbing my baseball mits with neadsfoot oil, worked pretty good.

If anyone works with leather, I would appreciate any tips.

Re: Working with leather Qs

#2

Re: Working with leather Qs

ThomD

>I have a Tandy awl for leather work that I use for everything so far. When it punches in it has an elongated diamond or dagger profile, and while it isn't sharp along the edges it makes itself a hole.

In general , using really heavy leather for structure, one assumes one needs some heavy thread, sinew, or lace to keep pace, so it isn't a foregone concusion that one will be running the same materials or holes in the heavier stuff. On the other hand I just bought a really old Singer treadle shoe sewing machine, and it sews 1/4" of leather effortlessly with fairly light thread and needles. You have to figure on the look you are after and run with it.

I normally lay out with a wheel and use the awl. Or I use a punch. But a lot of pictures show a fork that cuts multiple holes or punches for some work. I don't like to drill since is pushes out and up on the holes and may not give your leather the finished look you desire. If you have a drill press, I would put an awl in it, and let it do the work for your fingers.

Re: Working with leather Qs

#3

Re: Working with leather Qs

Robin Corell in Atascadero Ca

>I don't have a stitching horse and I manage to get very aceptable results, just not quite as quickly as if I were using a horse. I glue the seam first with Barges Leather Cement. I let the glue dry for a half hour to an hour then I trim and dress the edge. I prefer a nice round over and those litle Stanley corner rounding tools will work in a pinch but a good Osborne does a better job. I don't have a racer so I use a very small v gouge from a micro carving set to cut a groove for the stitching. I use 7 or 8 stitches per inch and I use an awl and go through both pieces of leather at the same time. The key is to get a good stitching awl and get right over the top of it to make sure that the tool is going through straight. on heavey leather this can be a problem if you are not perfectly straight. I have used a cheap Tandy awl and I can tell you from experiance that a good Osborne awl is money well spent. after punching the holes with an awl I then make my groove on the reverse side.

I probably should have mentioned at the start that I do a harness stitch with a needle on each end of the thread. I generaly stitch first from the side that the holes were punched as they are easier to see. once the first stitch is made you can see the hole for the second. I sometimes run the awl in a second time just before stitchg a hole especially once I have doubled back to lock a seam. once you have stitched through a hole you should not use a stitching awl in the hole or you risk cuting the thread. if you are having a hard time gripping the needles use a pair of smooth jawed jewelers pliers to pull the needles through.

neets foot oil should never be used on vintage stitched leather as it can weaken linnen thread. modern stitching is usualy polyester and is fine with neets foot oil. I would not use neets foot oil before stitching as it will be impossible to glue and will make holding the leather dificult. I use fiebings saddle saop to condition my leather after stitching. I glop it on using my fingers and work it in paying attention to rub plenty into the edges. the next day I then burnish the edges with a bone fid and buff up the rest with a soft rag.

he only edge stitching I have done is eight strand braid with a single string and I would not recomend it to a sane person. Standard and fancy edge stitching is more straight forward than harness stitching as you don'd need to wory about making grooves. I would recomend using kangaroo lacing if you opt for edge stitching. it is much stronger and easier to learn with as a beginer. Your lacing should be waxed before using. I use fiebings saddle soap for this too and I run it across an open can uning my finger to make sure it dosent twist. I then turn the lace over and do the other side. The lacing should dry compleately before using or it will streatch excessively. for a really nice look the stitching can be burinshed with a bone fid once you are done. for braid work I often use a hammer an lightly go over the braid work to make it lye nice and flat. the secret to really tight lace work is bevel cutting the lace but thats a more adcvanced skill.

If any of this is clear as mudd don't hesitate to ask more questions.

Robin

Re: Working with leather Qs

#4

I do have a speedy stitcher

Alan DuBoff

>I will look into one of those diamond shaped awls, that sound handy possibly...BTW, I have a speedy stitcher and was planning to use that for the thread, I just wasn't sure if it could punch through this thick of leather. Have you used one before?

Re: Working with leather Qs

#5

Re: Working with leather Qs

Alan DuBoff

>Yes, you have helped a lot Robin. The glue is a good idea, I need to get to a Tandy in my area and look at some of this stuff. I went to a local crafts store, but they only had sparse selection of Tandy stuff, mostly little kits. I can look online, but I want to see the difference in the needles for instance.

The smith I used to study with had a stitching horse, and I haven't watched him enough as most of the time I was forging...:-/, but kinda know how he did it. He would use thinner leather and I'm not sure what type of needle he used, but it had some type of handle on it. I mounted an emmert clone in a bench I'm building, and I am thinking I can turn it on end and use it like a stitching horse, and can even angle it towards me.

Currently I have a speedy stitcher, but haven't used it, but I would like to see an Osborne that you mention, I wouldn't mind investing in a decent tool for that, I suspect I will be doing this more and more, as I like leather a lot.

I'm not familiar with a harness stitch, I have been planning to do a lock stick, since I have the speedy stitcher, and that is what they show in the instructions. I just got the leather yesterday though.

Is the speedy stitcher worth using? It was so cheap, I can replace it easily, and just keep it for a rainy day in my toolbox I take when I travel occasionally and need tools. You never know when you might need it...;-)

I would like to do some edging, but don't have anything to do that. I have seen those little wheel thingies...Initially I'm thinking of just stamping my touchmark on it, I think that would make a decent imprint, it's pretty simple in design, a bass clef.

I think the thread in the speedy stitcher is waxed polyester, for what that is worth. Good point on hammering the thread down, I would do that on an anvil. I don't have any neets foot oil, and will just get saddle soap. Can I find that at a saddle shop? I have one not far from me. I'm not sure they make their own saddles there though, they probably just resale, I'm not sure. I have never been in there, but drive by it almost every day for the past 12+ years to get to the freeway...:-/

Re: Working with leather Qs

#6

Re: Working with leather Qs

Todd Hughes

>I used to sew many knife sheaths as well as shooting bags, all done by hand and most all vegatable tanned leather [a little brain tan]

After cutting it out I always wetted the leather first, just run some water over it or hold it in a bucket till it's wet. Doesn't have to soak but you want it wet. I would dye it now too for the first time.

I have had stiching poneys and clamps but never found them to usefull for this type of work at least I didn't like them. I have to confess most times I didn't lay out the stiching holes but I had a good bit of experance so they came out uniform plus if not exactly perfect went well with what I was doing anyway.

I used just an old awl with a triangle shaped short blade and punched the holes over a piece of 2 X 6 scrap. I never fooled with glueing the leather but I know lots of people do and probably not a bad idea...Just didn't seem like I had to and one more thing I could eleminate.

When punching the holes I normaly would strike the awl with my palm so it goes through the leather and into the wood, don't want an awl with a point that is two long. Some leather sewing I would push the awl through but not on a job like this.Normaly I would punch about 10 holes then sew them and then punch some more.

I always used two needles and waxed linen threads in a back and forth stich and then at the end back stich it some. When done trim the edges and then burnish. I used a piece of cow horn or a bone. I normaly would dye it a couple more times and also draw designs in the leather using a compass and/ or awl

With a knife sheath the wet leather will form around the knife, also don't forget to put the welt in the edge so knife won't cut your thread

I have also heard that neatsfoot oil will rot out stiching but I have used a ton of it on horse halters in my day. On what I made I normaly used this leather paste called Blackrock which seems to be very good ....Todd

Re: Working with leather Qs

#7

Re: Working with leather Qs

Alan DuBoff

>Robin wrote:

-----------

If any of this is clear as mudd don't hesitate to ask more questions.

-----------

Ok, you asked for it. I did some experimenting just now, and see that the speedy stitcher is capable of pushing through the leather, if I use a twisting motion, on a bench.

I also found that if I rolled the leather around, it would make it more workable, quite a bit.

Lesson 1) Do not use a handsaw to cut leather. This is like amputation...I had a hand saw handy and thought I would, err..,no good, bad thinking...do not cut leather with a serrated edge, leather dust is no good...dead skin...:-/

Got me to thinking...my old smithy instructor had given me an old plow disc from an old plow around the farm where the smithy is located. I think I can forge a piece of that into a large rounded blade, to cut leather. I saw one online, it reminded me of the Asian type knife that has a wood handle along the top. I can see the advantage of being able to cut with a large arched "straight" edge.

Hmmm....this plow disc could work for that by slicing an arc off the circumference, do some light forging to shape it, and just cut a slot in a piece of hardwood. Maybe use a couple split-nuts..., and then make a sheath for it. I could probably get it done in a day of futzing around...ok, that will be later, in the meantime, I think I will use an exacto knife, to cut out my first sheath, for an unfinished patch knife I forged a while ago. I've already tempered it, but still need to stick it in the pickle juice or sand/file it clean. Maybe this will inspire me to do that. Anyway I think I can make a small sheath for it with the help info from both you and ThomD. I think my speedy stitch is ok for now, since I now see how to use it more effectively on a bench. However, I still need to try the vise as well, the pattern makers vise I installed recentely has a pretty narrow lip. Problem is that's a mess right now...:-/

Anyway, the one question that I'm wondering is that I saw that some of the v groove tools look like are used to cut a crease for a fold. I have a possible idea where I would need a fold. I am not sure I have a v type gouge, but might, with some small carving tools. Crease is from the inside of the leather, I suppose?

I think I have enough info to create a small sheath, but need to find something to cut with, I must have something with a sharp edge on it around here somewhere...LOL!

Re: Working with leather Qs

#8

Re: Working with leather Qs

Alan DuBoff

>Todd,

Darn, I just lost a long post in my browser which crashed, and a couple things that you touched on.

I had found if I rolled the leather, it would soften up and make it more usable. But your suggestion to put it in water is spot on.

I also realized that my speedy stitcher will in fact work in this leather (1/4" thick) if I use a twisting motion, and use a bench under it. Then I can get leverage to get it through.

Now, I have to tell you about what I did, and it really freaked me out, but you will laugh...you of all people...I thought I would cut a piece of it, and marked out the silhouette of a patch knife I forged a while ago (was tempered, but not cleaned up and hone). So I grabbed a hand saw, and it took me about 2 good attempts to realize that it was like doing amputation, I've seen saws advertised as old amputation saws and that always gives me the willies...but it got me to thinking, and I don't want any leather dust around me at all. I mean I love leather, but the thought of animal skin dust getting in my lungs...NOT!!!!

I know you have that mummy head, although I thought I saved the pic but can't find it for the life of me, so this type of stuff probably doesn't bother you, but it gives me the willies...:-/

One Q on your post Todd, what is the welt? Is that the edge side?

I have an idea I'm going to try, which is a saw sheath, with a knife on the side as an additional sheath. But first I will make a single sheath for the knife as a trial.

The saw will be the same problem with the threads, and I want to understand what you were talking about. Thanks for the details, This gives me some to go on also...what type of punch would you use?

I also lost in the previous post to Robin, I realized that I have an old plow disc that my instructor had given to me at the smithy. I think I can slice an section of the outer circumference and do just a slight forging to shape it and slot a handle out of hardwood to make one of those large arched leather cutting knifes.

Re: Working with leather Qs

#9

I see you punch with an awl, nevermind that Q

Alan DuBoff

>

Re: Working with leather Qs

#10

Neatsfoot Oil

Stephen Shepherd in the State of Deseret

>I have heard the argument that neatsfoot oil will degrade linen stitching and I just don't think that is the case. I think the problem is the neatsfoot oil blends or compounds that are available on the market.

Pure neatsfoot oil has been used for centuries to treat leather, one of the more common methods of 'greasing you leathers' was to use grease or lard. Duck or goose liquor was prefered for boots and shoes to make them waterproof.

Linen is pretty tuff stuff as was silk (which was commonly used) as were bristles from pigs wrapped round the stitching thread.

Stephen

Re: Working with leather Qs

#11

If gluing...would hide glue make sense?

Alan DuBoff

>Stephen,

If I was going to glue, would hide glue be good to use? Seems so, since it is hide...:-/ They get the glue when the tan it I think, but I have never done that process.

Seems that hide glue would be the preferred if you were going to use glue. What say ye?

Re: Working with leather Qs

#12

One would think...

Stephen Shepherd in the State of Deseret

>however leather is much more flexible than wood and that can be a problem. Hide glue works very well for gluing hide to wood as the wood is rigid. If you want to use hide glue you need to add a plasticizer to the glue such as glycerine, sugar or molasses.

Barges rubber cement will stick anything to anything (well almost).

Stephen

Re: Working with leather Qs

#13

Re: Working with leather Qs

Todd Hughes

>I just used a thin sharp knife I picked up at a flea market for 50 cents to cut the leather. Think it was some type of wall paper knife. I have had a bunch of head knives and never could use them really. The welt is the strip of leather that goes between the sheaths edges and is that your stiching goes through...this is what protects your stiching from being cut by the knife blades.

Here is a photo of a knife and it's sheath I made, shows the stiching and designs drawn on maybe....Todd


img

Re: Working with leather Qs

#14

couple more

Todd Hughes

>heres two that had belt sheaths....T.


img

Re: Working with leather Qs

#15

Re: One would think...

BobStrawn

>Barge is the glue of choice I think. Easy to handle, and sets fast.

Pure neatsfoot oil is great stuff, but most of the stuff labeled as pure neatsfoot oil is not. Neatsfoot oil is not advised for conservation, since it will eventually harden.

Olive oil is really good for leather. It never dries and makes a decent finish. Olive oil is a traditional, even ancient, leather treatment.

Camellia oil has been used for a very long time, in the far east to soften and preserve leather, so it may be the perfect answer. It is very similar to olive oil, so if you don't want to spring for camellia, it will probably do well.

I have tried camellia on leather, and it seems pretty nice, but one month for tool care is not a very long test.

I am probably crazy about my use of camellia, but it is great on rough dry hands, is a pretty fine penetrating oil for loosening rust, and is great for stir-fry. Someday I may even try using some to protect metal.

Bob

Re: Working with leather Qs

#16

Re: One would think...

ThomD

>Neatsfoot oil will soften leather, which is good or tragic depending on what you have in mind. Some stuff needs softening other stuff doesn't. I never use the stuff since it can go rancid and there are better products, even natural base, out there for most applications.

I have a stitching horse, but it is one I made myself. I just tenoned one piece of wood into another, and then hinged a third piece onto the vertical. The jaws are very similar to what you would do with a saw filling vice. I just use a clamp to hold it together. It isn't a particularly nice piece, but it does free up one's hands.

I have a speedy stitcher, or perhaps my parents have it. I don't like them. They work by creating a stitch like you get with a sewing machine, where the thread is linked with itself. This is a weaker stitch than hand sewing with two needles. Obviously machine sewn leather gets by with it, but then it is really fast, and extremely regular, and pays out the thread better, and there isn't excessive wear on the thread. It has it's place. If I am going to put the effort into hand sewing I may as well exploit the advantages of hand sewing.

Re: Working with leather Qs

#17

A book recommendation... *LINK*

David Barnett - SW Florida

>...Al Stohlman's "The Art of Handsewing Leather", available in nearly every leatherworking catalog.


A couple more resources from an old thread

Re: Working with leather Qs

#18

Re: Working with leather Qs *LINK*

Robin Corell in Atascadero Ca

>I have learned a great deal of what I know from a guy at a local saddle repair shop. Early on I was advised not to bother with the speedy stitcher type tools. It may be a saddle maker thing but I listened to him and learned how to harness stitch by hand. A speedy stitcher will do a lock stitch. If the thread fails the stitching will all come apart and the seam will fail. With a harness stitch the seam is essentially double stitched through one set of holes so if one stitch fails the stitch on the other side will still hold.

To start a harness stitch you take a length of thread 2x as long as you need (add an additional 6" on each end for the needle) then thread a needle on each end. Insert a needle in your starting hole and position the thread so held is on each side of leather. Take one needle and push it through the next hole and take the other needle and insert in the same hole from the opposite direction. Keep repeating till you reach the end. At the end reverse direction for 4 or 5 stitches and trim the thread. The seam will look like a lock stitch but as you can see it is actually double stitched. It is called a harness stitch because it is used on high stress stitching like harnesses and bridals.

I have attached a link to where I buy my leather and tools. They are really nice people and have been very patient and helpful with me. Their prices are generally very fair as a whole though you will always find a few things cheaper at other places. They have a very nice quality Latigo that they have made for them which is what I use most often.

The awl I have is a saddle/ harness stitching blade in a shoe maker�s awl haft according to the pics on their web page. I stopped by their warehouse one time and they let me in the back and I just picked up and held some of the tools and purchased what I liked. The edge tool I use is an Osborne bissonnnete #4. This will put a 'bull nose' edge on 10oz and gives a dog leash a very nice feel. On some of the collars I have made out of English harness leather I have used a 'v' type edge tool for a more refined look. I have not learned how to use a creaser to add a 'bead' to the edge. I kind of like the look of what I do and tend to keep it simple as far as the design goes.

You should be able to find Fiebings saddle soap at any tack shop or even a good hardware store. I prefer the white and you want the stuff in a can rather than a bar of the glycerne soap.

Robin


Siegel of California

Re: Working with leather Qs

#19

Re: Working with leather Qs

Robin Corell in Atascadero Ca

>I use a heading knife to cut out the lether as well as for skiving. It is very important to keep your leather knife razor sharp. I also keep my awl point sharp. my needle tips are dull and rounded.

There is a type of cut used for easing the edge when folding. I have never done this and really don't know how. tapering the end when you fold it back on itself to make a tapered transition at the end is called a skive pronounced with a long i and a silent e.

Robin

Re: Working with leather Qs

#20

Re: One would think...

Alan DuBoff

>ThomD wrote:

-----------

I have a speedy stitcher, or perhaps my parents have it. I don't like them. They work by creating a stitch like you get with a sewing machine, where the thread is linked with itself. This is a weaker stitch than hand sewing with two needles. Obviously machine sewn leather gets by with it, but then it is really fast, and extremely regular, and pays out the thread better, and there isn't excessive wear on the thread. It has it's place. If I am going to put the effort into hand sewing I may as well exploit the advantages of hand sewing.

-----------

Thom,

I was gonna reply to your first message about this, but somehow failed. You mentioned the sewing machine and I have seen others say that they have used older sewing machines and they will sew leather fine. I occasionally see vintage sewing machines and/or industrial machines for sale, and was looking for one for my daughter recently.

My daughter has a portable sewing machine, and I saw needles on Tandy that said they would work in a home sewing machine. This leather is about 1/4" thick though, so it's pretty thick, and I need to even find out if 1/2" would fit under the clasp-thingy-holddon (tm), because if I was sewing 2 pieces, that is what it will be. That might not allow that to work on that machine, I don't know.

The Tech Shop has several sewing machines that will sew leather, but I am not a member...I do go there occasionally, and tonight is the SBMetal group meeting which I may go to. They have some Jukis I think, which are pretty good. What I really want to try using over there is the laser etching machine, it will etch metal, wood, glass, plastic, all types of stuff...looking forward to getting a piece of spring steel etched someday...

BobStrawn, I have some camellia oil and can try that. I bought a small jar once when I was getting back into woodworking several years ago, to care for a few Japanese chisels I bought. Truth be told I don't use those chisels much, and mostly spray T-9 as rust prevention, it's just easier to use. I'll try some of it on the leather, that's a good idea.

Oh, I just see Todd's pic he posted, that looks great, if I could get it dark like that it would be excellent. What a cool harness/sheath. Airport security outta love one of those on the scanner, heh?*g*

Re: Working with leather Qs

#21

Re: Working with leather Qs

Alan DuBoff

>Robin,

Thanks for that link, will make a note to stop there on the next trip I head down south...funny, I stopped at the Chevron station back at ThanksGiving when taking my family to visit my parents (Thousand Oaks, near the top of the 101 Grade). Check engine light came on in my wife's car. Ran ok though, and I disconnected the battery after I got down to my parents thinking it tripped off accidentally...it was fine until the way home, when I stopped at the same gas station, at the Solvang turnoff. It stayed on the entire trip home, which is annoying. Turned out it was a dirty air line causing it, which is evidentially common.

I usually stop at the Apple Farm when I have the family, unless I drive at night, then they sleep and it's closed.*g*

Thanks for all the info, much appreciated. I see a link for a book which Dave Barnett posted. That will help, since Todd also mentioned this 2 needle stitch. It sounds as if you just have 2 needles and run them in opposite ways of the same hole (one at a time I guess) and pull them tight. Keep doing that and tight it off.

I'm not familiar with the needles, the speedy stitcher has a needle with a core that the needle threads through, but I'm not clear how the other needles allow you to push the threading through, they must have some small eye on the end or something...

Re: Working with leather Qs

#22

Re: Working with leather Qs

Alan DuBoff

>Todd,

Looks like I should be able to get something decent pretty easily, this is absolutely gorgeous. Man-O-Man-Man, I hope you start to forge again. I like the scroll end on the other knife you posted also. Later, after I get home (I guess I have to leave first...:-/) I will try to stitch something. I'd like to get some needles, but there isn't a store that carries them which I *know* about close, a Tandy is in San Jose somewhere, and one up in SF. I live in San Jose, but way over on the west side by Cupertino. I'll find one or order online.

What type of needles do you recommend?

Seems that some of the vintage tool holders, like the Bridgeport I have...that's a nice heft one, would hold needles possibly. One of the bits is actually an awl. That might be good to punch with. I need to understand how you push the threading through with both needles. I do need that book someone posted I 'spose...:-/

Re: Working with leather Qs

#23

Thank you so much, will track this book down!

Alan DuBoff

>

Re: Working with leather Qs

#24

Which is *exactly* why I thought to ask...;-)

Alan DuBoff

>

Re: Working with leather Qs

#25

Barges good for leather to metal???

Alan DuBoff

>