Home Articles Forums Gallery Marketplace Videos

WoodCentral Forums

Knowledge You Can Build On — Est. 1998

Personalized Wooden Watches, Engraved Free

Working with leather Qs

Posts

Re: Working with leather Qs

#76

Looks Xlnt, hope my first ones should look so nice

Alan DuBoff

>

Re: Working with leather Qs

#77

Re: Portmanteaus web site designed for cell phone?

Darylee

>Your link to my site alerted me to this thread.

I appreciate your critique on my website, but the site is designed for 19" monitors.

Perhaps your cell phone isn't picking it up?

The buckles are made by another person who blacksmiths for a living and I'll not infringe on his copy right. He approved the photos as you see on the site. I'll honor his request.

The buckles are 3/4" square double buckles. BTW, I notice you all are showing some octagon tool boxes that you are also calling portmanteaus. May I ask what your historic reference is for calling them such?

I price my bags lower than anyone else because it takes me about two hours to stitch them together on a machine once the parts are finished. The stitching is the last step. The price per bag additional for hand stitching brings my prices in line with others who do hand stitching. I do not single stitch my bags. I saddle stitch them. This means two needles in hand with an awl.

It takes about a half hour per buckle end or Dee strap end. It takes about an hour per end on the small portmanteau (baby wipe size) figure that up yourself. With the cost of the leather and entire unit, I'm charging about $5/hour which is less than minimum wage.

Give me a break.

Darylee Foertsch

Owner; MuddyFlintTrades

Re: Working with leather Qs

#78

Re: I do have a speedy stitcher *LINK*

Darylee

>After posting above I read through some of your posts.

Throw the drill and awl for awl or speedy stitcher awl out.

Get a copy of Al Stohlman's stitching techniques.

'the art of hand sewing leather'

The last page of the book has plans for making a stitching horse.

The difference is the speedy stitcher and like take just as long as saddle stitching. However it makes a stitch the same as a sewing macnine does. The problem with that is that if one side is pulled differntly, it looks goofy plus if a tred breaks the whole will run.

By using the saddle stich techinique, you are passing two different lenghths of thread through the same hole. They lock together to keep in place. If one thread should break, it is only in that one section.


amaxon book hand sewing leather

Re: Working with leather Qs

#79

Question about the buckles?

Stephen Shepherd in the State of Deseret

>Have you ever seen an original hand forged iron buckle?

Stephen

Re: Working with leather Qs

#80

Re: Question about the buckles?

Darylee

>Yes

Some of them are quite beautiful.

Most are extremely utilitarian as my friends are who makes these. for me.

He is Steve Baxter of Baxter Buckles.

He made one of the flowers in the gates of the Blacksmithing museum in TN Quite tallented.

Re: Working with leather Qs

#81

Re: Those Portmanteaus Bags look nice

Darylee

>Don't give away all our secrets now LOL

The guild will be angry.

Re: Working with leather Qs

#82

Re: Portmanteaus web site designed for cell phone?

Skip in Falls Church

>Hi Darylee,

I didn't look at your site the when the post about it was made - but I did just now. You do some beautiful work. I'm self taught myself and pretty slow at the work I do - but I'm constantly amazed at the versatility of leather.

Skip

Re: Working with leather Qs

#83

Re: Portmanteaus web site designed for cell phone?

Darylee

>Me too

And a heartfelt thank you. I appreciate that.

I've been doing it for 30 years.

I want to be affordable for those who can't do it, and don't require the historically correct methods needed for stitchcounters at juried events.

Most people buy the machine stitched.

I've also sent out my items with the parts tacked together and enough black or white linnen thread and two saddler's needles to do it themselves. Sort of a kit for them. They simply love it. They don't have the problem of finding the leather or the supplies or hazard to dye and finish it. All they do is apply the stitching and have a piece of themselves in a piece that may become an heirloom.

I enjoy woodworking for the same reasons.

I just finished a class making a Windsor chair. Though, we didn't have to lathe some of the parts, we did the spokeshaved back, continuous arm and put it together....alot for just 3 days.

Re: Working with leather Qs

#84

Re: Portmanteaus web site designed for cell phone?

Alan DuBoff

>Darylee wrote:

"Your link to my site alerted me to this thread. I appreciate your critique on my website, but the site is designed for 19" monitors. Perhaps your cell phone isn't picking it up?"

No, I use a dual head montior setup with 2 1600x1200 monitors, so have 3200 x 1200 of display real estate.

My comment was tongue in cheek, I should have put an emoticon on there or something if there isn't one.

My point is that you do beautiful work, why post such small photos on your website? I can hardly view them and/or see the detail.

Maybe I'm just old (not even denying that), and my eyes are not good enough these days...

Re: Working with leather Qs

#85

Re: Question about the buckles?

Stephen Shepherd in the State of Deseret

>Where have you seen an original hand forged iron buckle? What museum or historic site did you see them in? In original I mean one that is at least 100 years old.

I have been researching for 35 years and in the entire time and after visiting over 200 museums I have yet to see one. I have a friend that is an historical blacksmith, and he has never seen an old one either so we are both interested to know where they are. I talked with him today about the subject again.

Stephen

Re: Working with leather Qs

#86

Re: Question about the buckles? *LINK*

Darylee

>I'm surprised at that.

I've seen musket sling buckes, shoe buckles, knee buckles (breeches strap buckles), crevat buckles, belt buckles and such from Ft. Ti to Williamsburg to St. L.

I think the prettiest I've seen were a pair of shoe buckles from 1758 found in a garbage heap near Fort Ligonier. The date is known due to the records of the British army who wintered there. They did find a huge cache of shoes in that trash pile.

If my memory is accurate. (30 years ago I lived near there and may have the buckle misplaced to the location). It was entirely iron.

This buckle on ebay looks like it. (link)

Examples can be found of iron buckles of varius sorts to the 15th C.

For museum reporoductionshoes see the book Shoes and Pattens By Francis Grew, Margrethe de Neergaard well worth the price. They are directly from Mideaval excavations in England.

Most shoe buckles and small buckles, the outer buckle is brass, while the inner workings is iron. Asside from that, buckles made wholely of iron are of a lower class. Concentrate your research to reading runaway apprentice and servant ads. (slaves usually don't have shoes) Sources are old newspaper ads and such from 1700 to 1820

Write the Chicago field museum and the Smithsonian for information. It is amazing what they have and never display. ...you may have to go there though for more. Inquire about private collections too.

e.g. I got photos and went for measurements at the Chicago field museum for a cree strapdress. Interesting trip. Since then I've found 4 people with dresses similar to that one, but of later manufacture.

As such low class clothing and common items are not often mentioned, or make their way to museums. Same with horse/livestock tack.

Blacksmithing as Knotwork/marlinespike was apprenticed and was rarely written or drawn in diagrams. Some records may still exist, but a buckle is one of the first things an apprentice blacksmith makes after a few s hooks.

Many runaway records are listed online if you use the right keywords.

guttenberg online has some interesting literature too.


http://cgi.ebay.com/Revolutionary-War-Colonial-Era-Uniform-Iron-Shoe-Buckle_W0QQitemZ160203479474QQihZ006QQcategoryZ37908QQ_trksidZp1638.m118.l1247QQcmdZViewItem

Re: Working with leather Qs

#87

Re: Question about the buckles?

Darylee

>ps I finallyfound the page...when you get your hands on a copy, look at page 75

In short it says all the buckles are of iron some show traces of tinning

OK, now you've done it/ I'll be burried inthis book for the rest of the night.

Re: Working with leather Qs

#88

Re: Question about the buckles?

Stephen Shepherd in the State of Deseret

>Perhaps I should have been more precise, as you have been. I am talking about the harness buckles used on the Leather Valice (I hate portmanteaux words).

Stephen

Re: Working with leather Qs

#89

Re: Portmanteaus web site designed for cell phone?

Darylee

>Humm, that's not quite what you said.. in fact you attacked ...or appeared to. I can't stand when a fellow craftsman attacks another...

anyway, either way real or immagined appology accepted. Please accept mine.

Like I said in my reply on those buckles specifically,

"The buckles are made by another person who blacksmiths for a living and I'll not infringe on his copy right. Or his friendship He approved the photos as you see on the site. I'll honor his request."

Additionally, most of the photos were taken several years ago with an inferiour camera. That is about as good as the resolution gets with a 2 megapix camera. I now have a 5 mp and the photos are much better, but I cannot take puctures of items already sold. I may take more eventually but want to get the paypal inks up and running.

I'm a professional firefighter and have been doing woodworking for most of my life and lethercraft for the past 30 years.

I'm not a webpage expert and have to rely on programs to create such.

Unfortunatly this one was crated first in Publisher then edited with FrontPage, now I'm using expressions web...much better.

I too often use a dual monitor setup as my main computer is a 17" widescrren with a 1400x900 setting. The other is a 20" monitor so they are the same width. It is mounted above the other. (reason why my pages are so long) I'm using IE 7

It is amazing how important the quality and the cut of the leather is in relation to the final outcome of the project.

BTW, I see where you've asked a few questions further down. If you ever need assistance finding the leather stitching handbook or equpment, you can contact me via email. No problem. I'm sure I'll bend your ear on blacksmithing etc as I'm just starting to make a few things. Neat stuff.

Re: Working with leather Qs

#90

Re: Working with leather Qs

Darylee

>LOL almost.

Ballistol and lether. I have used it to clean and refresh my workboots. It makes the light leather darker,but makes it waterresistant again like the origional silicone coat was supposed to....I now treat my western boots with it. It is mostly surgical grade mineral oil. I prefer it to clean guns and metal parts.

Lexol is good on chrome tanned finished leather such as your truck has. It's good on shoes too. It's a lether cleaner and gives some lubrication back to it. Sort of like using hand cream.

A similar product I prefer is BIC 4.

Ballistol as a leather finish..I'm just experimenting with it.

I made a case from oak tanned leather for my cabinet scrapers. I have a concern that the tanning will still react with the steel. I'll find out with those.

Alternative finish (taught to me by the man I tutored under and a a peace offening to you after this moring mosts)

1/2 olive oil, 1/2 neatsfoot oil Let it soak to the leather and reapply as needed.

Follow with a finish of Resistol.

This results in a russet finish. (cowboy rig color)

If other color finishes are desired, dye before the oil.

Re: Working with leather Qs

#91

Re: Progress update...no sheaths yet though...

Darylee

>Excellent choices.

Indeed that is the book I was recommending below.

Re: Working with leather Qs

#92

Re: Working with leather Qs

Alan DuBoff

>Darylee wrote:

"Alternative finish (taught to me by the man I tutored under and a a peace offening to you after this moring mosts)

1/2 olive oil, 1/2 neatsfoot oil Let it soak to the leather and reapply as needed.

Follow with a finish of Resistol.

This results in a russet finish. (cowboy rig color)

If other color finishes are desired, dye before the oil."

This makes sense to me, as someone mentioned olive oil as being good for leather. For that matter, it seems that hand lotion might be ok, since we use it on human skin, I wonder if aloe would be good...but not to digress...

You mentioned chrome tanned in reference to the leather in Rolls Royce and Land Rover seat coverings, and I guess this is what makes it shiny on the grain side? That leather is very unique in how the finish is on it, and I think the leather is similar in a Rolls Royce, but have never owned one. I do know the leather in my '84 Porsche is more cowhide, and is not shiny on the grain side.

I have some oak tanned leather and am planning to use it for tools. I have been told that vegetable tanned leather is what one wants for tools. Oak seems to be one of the preferred sources for vegetable tannins, so I am led to believe by folks I've talked with. I got the impression that the verdict is still out on that...in that regard I have heard that you do in fact want something like oak tanned.

Re: Working with leather Qs

#93

Re: Portmanteaus web site designed for cell phone?

Skip in Falls Church

>Hi Darylee,

Your idea of sending out nearly finished items for customers to stitch themselves sounds like a great idea. My experience is that the stitching takes a major portion of the project time.

One thing that did surprise me is that a couple of years ago I couldn't find any forums that were dedicated to leather working. It would have been nice to be able to ask some questions about how to do things. My stepdaughter did go to William and Mary and so I took the opportunity to visit the shoemaker and saddlery shop at Colonial Williamsburg and ask a few questions - not to mention observe the use of some tools.

Skip

Re: Working with leather Qs

#94

Re: Working with leather Qs

Darylee

>I work with mostly oak tanned and of high quality made here in the USA (from PA) I like it because of it's properties and light quality.

No don't misundersatnd me. Not all shiny finished hides mean they are cromium tanned. It's just that most (not ALL) upholstery and shoe leathers are chrom tanned. In fact, many of the high end automotive makers use veg tan.

There are other things to use to vegetable tann leather. I have some wonderful bull Bison tanned with walnut that will become a pair of moccasins. It's a rich chocolate brown color.

There are vegetable dyes as well ranging the rainbow of colors so just because that hide is green, doesn't mean it's not of a vegetable tanning process. There are tests you can do on the leather if you need to know. Just do a web search.(hint upolstery cleaners/steam cleaners need to know)

Two reasons to know.

1 Never place Chrom tanned leather next to the skin for extended wear....huge reason to wear socks.

1 Never make a knife or metal in Chrom tan. It rusts. I'm not a chemist, but I think it acts on steel like bleach does.

The tannin of oak also rusts steel. Have you ever seen the nail in an oak floor make a black mark in the wood?

That is rust. I take advantage of that in some of my historic dyes. Hence the reason I'm concerned if the ballistol will be enough to keep my expensive (to me) cabinet scrapers from rusting.

I know one thing, they are definately staying sharp. Why do I not think twice about sharpening a knife, yet hate sharpening my scrapers?

On a historic side note most communities had a small tannier. Everyone either butchered or hunted their own meat. As the community grew, so did the need for good leather. The community as a whole would dig a pit, place the hides in the water pit along with all the wood chips from their building endevors. Then the furniture was mostly pine, some ash, walnut, oak, birch...it all went in. Eventually someone specialized as a tanner buying these hides, finishing them and selling them to the shoemaker (cordwainer) and other trades who needed them. There are notes of such endevors of communities from the middle ages to the 19th century.

The origional thought of what is someones trash is another's treasure.

Re: Working with leather Qs

#95

Re: Question about the buckles?

Darylee

>So do I .. it relates to a piece of luggage used to hold a coat... but it's a word like kleenex... kint he late 1800's and early 1900's it referred to a piece of luggage that looked more like a small steamer trunk

buckles are buckles.

To work with, I prefer solid brass and so did they from the early 1700's on.

my point was the blacksmithed buckles for shoes, belts, horse / ox tack, luggage, anyting was lower class/ chaper.

The good items are brass or silver wrought (neck crevats/scarvs)

Re: Working with leather Qs

#96

Re: Portmanteaus web site designed for cell phone?

Darylee

>They are there. Just keep using google to search...look for shoemakeing and cordwaining too.

Re: Working with leather Qs

#97

Re: Working with leather Qs

Alan DuBoff

>Darylee,

Excellent points. Thanks for dropping by this thread.

I didn't get any time last weekend to look at this stuff, and was busy making sawdust, and moving things around to make space for some of the leather stuff...:-/

I have a small sheath for a small knife I forged, made a couple different ones, but one looks distinctively better in appearance.*g*

I used an overstitcher, but haven't stitched/punched it yet. Just planning to use either an awl to punch, or a small drill, it's thick leather at about 1/4" thick (16oz).

If I soak the leather, I can punch it I believe, but when dry it's difficult at best to punch an awl through 1/4" leather, so I found.

Soaking the leather allowed me to form/mold it to the knife, and I cut it to match the shape of the knife and have it folded. This first one won't be great, but will get me started to making some type of sheaths.

Re: Working with leather Qs

#98

Re: Fabulous article, and very useful stuff...

ThomD

>Nice sheath. That wiggly look in the thread is covered in the hand stitching book mentioned, you just need to lay-out straight, and keep a consistant pattern of over and unders, and it comes out looking pro.

Relative to some coments on linked versus two needle stitching. I prefer the two needle stuff the only thing about linked as with "speedy" is that it isn't as good, but if done with a sewing machine, it sure is fast. The probelmw ith the speedy is it isn't fast, it isn't that straight loking and it isn't strong. Fast is good when the results will probably last a lifetime and take like 30 seconds vs an hour.

Re: Working with leather Qs

#99

Re: Question about the buckles?

Stephen Shepherd in the State of Deseret

>Darylee,

I was joking about hating portmanteaux words which are words that are made up of two different words like 'porter' to carry and 'mantle' or coverings (coats), a portmanteaux word like smog, a mix of smoke and fog. But the word portmanteaux is made up of two words.

As for smithed items being cheaper, I am not sure I would agree. Buckles are difficult to make and the most common buckles used on period pieces were brass.

I have seen brass and blued iron shoe lifts and the brass was cheaper. This happens in a lot of cases where the brass item is cheaper that the iron.

Stephen

Re: Working with leather Qs

#100

Re: Question about the buckles?

Darylee

>It depends on what time perioud. The brass was perferred. The iron was in lower class and frontier. I concentrate my history to F&I through Revolutionary war...some into the war of 1812

If you look at the prices then of the imports (all brass was imported at that time) it was very expensive.

After the Civil war, it was cheaper. and more prevelant.

So, it really depends on what time, and what country of which you are speaking.