Home Articles Forums Gallery Marketplace Videos

WoodCentral Forums

Knowledge You Can Build On — Est. 1998

ADVERTISE HERE - FREE TRIAL

WC Weekend Accomplishments....

Posts

WC Weekend Accomplishments....

#1

WC Weekend Accomplishments....

Dennis E Peacock

30 Jun 2014

Good Morning Everyone,

My internet service has been out since Friday afternoon, so I'm writing this to you today teathered to my cell phone. :)

The construction project continues. I should be ready for drywall by Wednesday of this week. I'm hoping for the electrical service cutover by the end of next week. We've been having so much rain and so many storms here that the weather has caused us to really take a beating on getting real work done on the overall project. I'm very hopeful for good weather for the next 2 weeks so I can get some serious work done on the exterior of the addition.

I'm frustrated with non-responsive sub-contractors, water, mud, rain, and people that complain that this is costing a lot of money. I'm working as much as I possibly can to save my MIL money, but the LOML and her mom are having to learn a hard lesson in building construction....it costs money and a lot of it. :)

Ok, my rant mode is off now....that's it for me...so what did YOU do this past weekend?

Best of weeks to you all.

Dennis Peacock

Re: WC Weekend Accomplishments....

#2

Made good start on reloading bench....

roger lance

Like I need another hobby !!??.....but since I've gotten back into shooting paper, I've decided to give reloading a try and designed a bench to work on.....


So, I'll be adding some plywood, wood trim, and a laminate on the top.....some drywall.....and begin reloading.

Re: WC Weekend Accomplishments....

#3

Well done one and

Gary Smyth

with its bones looks like you could load anything up through grapeshot.

Re: WC Weekend Accomplishments....

#4

Re: WC Weekend Accomplishments....

Joanne in Point Pleasant, PA

Spent time cleaning my shop and starting to draw out a cart I am making my aunt. The biggest mess was the wedding present I delivered last week up on Cape Cod where an old friend got married. For years she has wanted me to make her a mailbox that looks like her house. But she decided that since the plow knocks down the mailbox every other year, perhaps a birdhouse would be better. I was happy to be able to be more rustic. I made the garage the birdhouse (entry on the end). There is a screw on the end that comes out and the garage door actually opens for cleanout. The breezeway and main house are "fakes". It got pretty large. Good thing it is not my job to figure out how to get it up on a pole. I used some cypress, cedar, white oak for trim, and leftover shingles from my barn's roof I found upstairs. I am not the greatest in dealing with shingle layers. Especially on such a small structure (for the size of the shingles). But I think it came out fine for a birdhouse. I didn't get to see their faces when they opened it, but they love it. Her new husband was in construction and is now a realtor and was absolutely tickled with it.




Re: WC Weekend Accomplishments....

#5

that's one creative bird house

Bill Tindall, E.Tn.

Beyond the design challenge it is hard figuring out how to fasten these tiny scale things together. It's not like you can toe nail studs on this scale or find scaled roofing nails. .

Re: WC Weekend Accomplishments....

#6

Re: Thanks

Joanne in Point Pleasant, PA

And I am not a fan of nails at all. The main body was 3/4" (or thicker) cypress that I screwed together with outdoor deck screws. For the shingles I used a nail gun with 3/4" and 1" brads. The doors and windows were smaller and split with such "big" nails, so went to the glue and pin nailer. I added some small nails with bigger heads on the roof to keep that in place better. Here's one of the house pix I had to work with. Besides my memory (which wasn't much help).


Re: WC Weekend Accomplishments....

#7

Re: WC Weekend Accomplishments....

Kevin French

Thanks for the rant Dennis we're meeting with a GC to build our new house tomorrow

But last week we spent the best week, eating the best food, with as good a group as you could bring together for our annual canoe trip to the Allagash River of ME. Even the weather was prefect.



Lining the canoes over the old Long Lake Dam

Re: WC Weekend Accomplishments....

#8

Delivered . . .Done 

Mark Mandell - Gone Round In New Jersey

As I've posted here several times concerning this "project" I'll now show & tell the finished piece.

My son and DIL bought parts to a "designer" table out of a New York furniture "gallery". Parts consisted of the two halves of the top, one extension leaf, the extension slides, two (yes, 2) legs, and a broken mounting board to hold slides and the legs using hanger bolts screwed into the end grains. Represented to be solid Quarter Sawn White Oak, they paid $150 for the scratched and shop-worn pieces. It then came to me for reconstruction.

So . . . they finally went to contract on their first home that would provide them and their growing family with the space where they could actually use the table. So . . . get to work, Pop, they need their table!

Made a pair of legs to match the original 1" thick legs (5/4 QSWO ain't easy to find 'round here). Then a new 5/4 mounting board out of 2 sections of cab-grade ply. Sanded off the wrecked lacquer finish along with most of the surface defects, shaved off the busted/dented corners, remade the broken registration pins. and then refinished everything with the undercarriage stained to match the oak.

Took it up to the new house on Sunday and


They now have a dining table!

This shows the undercarriage with the gusseting put in place to stabilize the legs


And lastly, (especially for Alan Young) a good view of the top's finish which was dewaxed ultra pale shellac, 10 drops of TransTint medium brown added to a mixed pint then applied as a 3/4lb cut sanding sealer followed by a 1.5lb cut sealer, then top-coated with three coats of General Enduro Clear Poly gloss with cross-linker addition. Finish is "off the gun" with no rub-out or leveling needed.


Next . . . . ;)

Re: WC Weekend Accomplishments....

#9

PS

Mark Mandell - Gone Round In New Jersey

Yes, they have new chairs coming for the table :D

Re: WC Weekend Accomplishments....

#10

More progress.....

roger lance

Had to rebuild part of the back wall.....


and apply some drywall to give an idea of what is to come.....


Re: WC Weekend Accomplishments....

#11

Nice

Mark Mandell - Gone Round In New Jersey

So how many of the howitzer shells do you plan on in a day? Can't wait to see your winching set up. In case of nuclear attack, you'll be nice and comfy under that bench! :D

Re: WC Weekend Accomplishments....

#12

Re: Nice

roger lance

Mark.....I'll be reloading for a 308 and 357 on a RCBS Rock Chucker single stage press.....so, 50 rounds would be good production in a reloading session.

Re: WC Weekend Accomplishments....

#13

Re: WC Weekend Accomplishments....

Matt Robinette

I have spent the last few evenings sorting the Q/S W/O boards I am going to use on a table I am going to build. It is as Tage Frid called it a Dutch pull-out or as Tommy Mac called it a pub draw leaf when he built his. But what ever one calls it, the table will have a little of this and a little of that as far as design. I am still working on the final design but if I had to call it anything it will be mission/Green. I know i want Blacker chair leg indent detail but every thing else such as cloud lifts and inlays are still being worked out.

Re: WC Weekend Accomplishments....

#14

Don't overdo the embellishments

Bill Tindall, E.Tn.

I am design challenged so I seek help where ever I can find it. A land conservation project has resulted in my getting to know an artist who also likes furniture, incidentally of the type you are designing. Over the past several years I have asked her about some designs that I have seen and have pictures of, some of which I have built. It is not uncommon for her to make a statement like, "what is that all about", pointing to some embellishment on a piece of furniture. She will be pointing out something the designer added that to her makes no sense for one reason or another. Most recently she scratched some feet embellishment off a piece I am working on. I have found her advice sound upon reflecting on it and supported by another artist I occasionally have the opportunity to consult.

The bottom line is don't overdo the decorations, and they need to go together. Pictures I have of student furniture particularly suffers over embellishment, maybe because they are learning the design aspects of furniture.

Re: WC Weekend Accomplishments....

#15

Re: Don't overdo the embellishments

Jesse Cloud

I agree wholeheartedly.

I often think about an article by Michael Fortune where he recommended no more than three different things which catch the eye. Otherwise the piece may become just a collection of stuff, rather than something that works as a whole.

A&C and Greene and Greene are especially a slippery slope in this aspect. The pieces in those styles that move me the most are those that show some moderation of embellishment in deference to supporting the overall form of the piece.

But, after all, this is a hobby. Make what you like!

Re: WC Weekend Accomplishments....

#16

The thing that gets me about G&G

John in NM

Is that not all the pegs, splines, and other stuff is functional - and to me that sets it outside a lot of genuine A & C furniture.

Whereas the cloud lifts get away with being purely aesthetic, the pegs and splines seem overwrought to me when they serve no structural purpose - I once commented on this to a big G&G fan in the shop where I worked, thinking the shop's designer was taking liberties with the style - and he replied that the piece was a direct copy. To this guy that made everything ok, to me it took the original down a notch or two.

It can be hard to exercise some restraint in placing little square pegs - but I agree that it is vital to either get it just right or do less. Too much looks awful whereas too little passes ok. I never could hit "just right" :D

Re: WC Weekend Accomplishments....

#17

Alan Young

Thanks for posting these pictures Mark

Alan Young

The design still looks a bit awkward-I know you remedied the cross grained mounting issues. The finish makes up for the design issues Beautiful.

Re: WC Weekend Accomplishments....

#18

The Design

Mark Mandell - Gone Round In New Jersey

I didn't question the parts, etm. since it came out of a New York gallery even though I had a suspicion that it was sitting there in parts because nobody else would buy it. With the slides and mounting board in raw wood, the original assembly would have looked like ****. But DIL "liked" it and until their taste changes it will serve them in their new home. I figure a day in the shop, a couple of boards, a pint of shellac and a quart of finish was well worth it.

Re: WC Weekend Accomplishments....

#19

Allan W

Re: WC Weekend Accomplishments....

Allan W

I built a Little Library last winter. For shingles I purchased a bundles of long door shims and then cut them down to shingle size and glued them on the roof. Lots of work, but the finished look was great.