Home Articles Forums Gallery Marketplace Videos

WoodCentral Forums

Knowledge You Can Build On — Est. 1998

Premium Domestic, Figured & Live Edge Hardwoods in Stock. Best Prices for Serious Woodworkers.

WC Weekend Accomplishments....

Posts

WC Weekend Accomplishments....

#1

WC Weekend Accomplishments....

Dennis E Peacock

24 Sep 2013

Good Morning Everyone,

We've been having some wonderful weather here....cooler temps, gentle breezes, and this along has allowed the LOML and me to get in the shop and continue our process of cleaning and organizing the shop. You're probably thinking that there's no way that it takes you thing long to clean your shop up. Well, I'm here to tell you that it does. My shop has basically been closed down since 2007 due to family issues, family loses, taking care of 2 widows, and even more. I guess life changes for each of us requiring us to refocus our priorities or even teaches us how to choose proper priorities for our lives and families. Life is getting back to "normal" now and the shop is getting clean and organized....and I will be back in the shop make things once again very, very soon.!! I'm excited about it and the LOML is excited about it as well. So now it's time for me to get off of here and get ready to leave for an early morning dental appointment and then it's off to the day job.

Thank you for your support, prayers, thoughts, and patience as I have had to sort through many things tossed my way in life.

That's it for me, so what did YOU do this past weekend?

Best of weeks to you all.

Dennis Peacock

Re: WC Weekend Accomplishments....

#2

Cockbeading

Joe in a Cleveland suburb

I got to work on my daughter's desk this weekend. Haven't worked on it for a while. That's how I do my woodworking; little spurts here and there.

I did the cockbeading on the drawer. I had never done this before, but Bill Tindall's recent desk inspired me to do so. I didn't do the full thickness of the bead on the top and bottom of the drawer. I wimped out and did the same width all the way around the drawer.

Next time I do this I will likely make the bead width the same width as the drawer front, at least on the top and bottom I will. It looks ok, but you can see the glue line on the top of the drawer front. Not the end of the world. I will probably be the only who sees it.

Here it is:


I even had time to put stain on it. Next, I have to glue up the boards for the top. The end is in sight.

With stain:


The above picture doesn't show well, but the stain, I think surprisingly, looks pretty nice. I think it's going to work out well.

Joe

Re: WC Weekend Accomplishments....

#3

Re: Cockbeading

Bill Tindall, E.Tn.

When done right a pigment stain can result in clarity and you achieved this goal. You obviously got the sanding right.

Nice joints on the cock bead. It sets a drawer off nicely. Now, on some future project, where it is appropriate, you can use some spectacular veneer for a drawer and cock bead it. The firewood pile can be a source of small veneer flitches.

Re: WC Weekend Accomplishments....

#4

Attended Antique Tool Auction in Nashua, NH

Ron in Sterling, CT

I roamed the Parking Lot Tool Tailgating on Thursday afternoon, then took in the auction Friday & Saturday. Lots of Fine Antique and old user hand tools to drool over. A Stanley 92 shoulder plane and a few other odds & ends followed me home.

Ron

Re: WC Weekend Accomplishments....

#5

If its Fall, its time to paint the house.....

roger lance

the trim anyway. Thought I'd share a little product review of a way to repair holes and small areas of wood deterioration like on my facia board at my roof line where water gets at the wood and causes problems. Its a form of Bondo that was used in auto body shops.....same smell....same color....same method of application.


I've been buying it in big box stores in the paint department and I'm very pleased with the results. After a day, the product sands beautifully and takes paint great and stands up to weather very well.


Here, I'm using it on a problem area.....tomorrow I'll sand and apply a second coat. I've used this to repair woodpecker damage to siding.....it simplifies the repair considerably.

Re: WC Weekend Accomplishments....

#6

Re: Cockbeading

Jack Plane

Very nicely done!

As you say, you'll likely be the only one to notice the top bead's glue line, but it is precisely for this reason that the top bead was traditionally the full depth of the drawer front thickness. The side and bottom beads were traditionally half-width.

Re: WC Weekend Accomplishments....

#7

Re: WC Weekend Accomplishments....

Kevin French

Friday we went out and bought a $1000 worth of primed Cedar clapboards, not as many as I hoped there would be.

Their still on the ground

Saturday we went the Spartan Race at Killington VT. My stepdaughter finished 2nd in her age group 5th women out 500+, and 51st overall of 1444, in her 1st Race, beating her future BIL by over a half hour.

I had to settle for my favorite beer (Double Bag) AT the Brewery (LongTrail) on Tap.


img

Re: WC Weekend Accomplishments....

#8

Re: WC Weekend Accomplishments....

Matt Robinette

It was a good Sunday and started with getting the house windows washed then later in the day I finished putting the last accessory on the new table saw. I had sold my Jet 3 hp with 52 in extension table but kept the Jessem router lift that came with it. Now over the last few weekends I have installed the router lift and the out feed table that I had copied from a Jim Becker design many years ago. I also wanted a drawer for all the tools that end up on the top, I can also fit the guard in the drawer when not needed. I also made a mobile base and then sorted the dust collection. It has been a busy weekend or two or seven, I have kind of lost count.Here are pics of the before and after.

Matt

Re: WC Weekend Accomplishments....

#9

Re: WC Weekend Accomplishments....

Joanne in Point Pleasant, PA

Nice job. That IS an old design--I think it's been quite a few years since Jim sold his Jet and got a big, honkin' slider saw.

What a clean shop!

Re: WC Weekend Accomplishments....

#10

Re: Cockbeading

Matt Robinette

I think it looks good it is something that looks so simple but I struggle sometimes to get it right. It always seems to long then try to trim it with table saw or miter saw I have a hard time taking just the right amount off. I think I am going to try one of those shooting board jigs and a hand plane next time.

Re: WC Weekend Accomplishments....

#11

Re: WC Weekend Accomplishments....

Matt Robinette

Thank you but I didn't include the workbench it seems to generate it's own pile of stuff. :)

Re: WC Weekend Accomplishments....

#12

Thank you!


Re: WC Weekend Accomplishments....

#13

Re: Cockbeading

Joe in a Cleveland suburb

Matt,

I had never done cockbeading before and it was really easy. Mine didn't come out perfect, but next they will. :)

I did the miters two different ways. I tried a shooting board and I used a piece of scrap with a 45 degree cut on it to trim with a chisel. The chisel worked best for me; the shooting board caused some chip out. Chisel was quick and easy.

I trimmed the beading a tad long, put it in place, marked where I need to cut, and then snuck up on it. Worked out fine.

If you search back in threads a week or two ago, you will find some very good info on this by Bill Tindall.

Good luck.

Joe

Re: WC Weekend Accomplishments....

#14

Trimming the miter ends to fit

Bill Tindall, E.Tn.

I use a shooting board. I never get chip-out. Unsure why results are different. Properly used, the shooting board supports the exit of the plane cut. A sharp blade is essential.

For those unfamiliar, the shooting board enables one to nibble off 0.001" +/-increments from the end of sticks. With patience one can achieve perfect miters and other length fitting tasks. The shooting board also enables one to adjust the angle at the end, again to enable a perfect fit.

Re: WC Weekend Accomplishments....

#15

Me Too

David Yoho

Roger, I've been getting some exterior painting done around here the past few weeks. This week I'm working on the railings of our wrap-around front porch. I found some rot on a bottom section of one post. When I went to my cabinet to get out the can of Bondo, I found it had dried since last use. I went to Lowe's and bought that exact product in your picture and fixed the problem in no time. I've used it several times in the past and it works great.

Re: WC Weekend Accomplishments....

#16

A little progress....

roger lance


Re: WC Weekend Accomplishments....

#17

That turned out nice, BUT..

Keith Newton

If you didn't do anything above there, you may still have problems.

I see a little sliver of light between shingles about 10" to the left of the corner of the fascia. If that space is open back to the top edge of the drip ledge, you are getting moisture in from above, which will be rotting the deck and sub-facia.

I like to have a little more overhang on the shingles than that as well. After or during a heavy blowing rain, if the facia is getting wet, it isn't enough.

I'd sure lift the shingles up over where you had that problem after the next rain, to see if it is wet underneath.