Home Articles Forums Gallery Marketplace Videos

WoodCentral Forums

Knowledge You Can Build On — Est. 1998

Reach the woodworkers who ACTUALLY BUY

Weekend accomplishments (pic)

Posts

Weekend accomplishments (pic)

#1

Weekend accomplishments (pic)

Stuart Hough



Finally got my FRW (First Real Workbench) together today! After three years! Chopped the final mortice, bolted the base together, flipped the top onto the base and hammered in the drawbore pins. Now onto the final flattening and adding the vises. Then I start on all the projects I've been promising for my bride.

Re: Weekend accomplishments (pic)

#2

That looks great!

Bruce, a MN Galoot

I hope you have it in its final position, because it also looks like it's not going anyplace.

Re: Weekend accomplishments (pic)

#3

Bob

Re: Weekend accomplishments (pic)

Bob

Now thats a work bench. Happy wood working.

Re: Weekend accomplishments (pic)

#4

Re: Weekend accomplishments (pic)

mdclor

Stuart,

We need details. What are the dimensions? What is the wood? What will you use for the finish? How many years have you been married? LOL

It looks great!

Re: Weekend accomplishments (pic)

#5

Thanks for the nice compliments! Answers to follow

Stuart Hough

1.) Wood is Southern Yellow Pine, well acclimated to my

gara...er...shop before starting the bench. Almost a

full year!

2.) Dimensions are 23.75" deep by 71.75" wide by

32.25" tall. Still have to square up the ends so it will

end up with a bit less width.

3.) Planning on using a thinned Danish oil for the finish,

so it's not too slick, but will still offer some protection

from glue drips and such.

4.) Been married for almost 32 years, but she's starting

to lose patience. :D

If anyone has any spare Lake Erie Toolworks wooden vise screws they want to donate, I'll be happy to give them a good home!

All tips and/or suggestions are appreciated.

Re: Weekend accomplishments (pic)

#7

Nice bench!

Joanne in Point Pleasant, PA

I have just started working on a "real bench" too. I have a section of some old bowling alley to use for a top and some old fir (I think) beams that came out of someone's house to use for the base. While I'd love some of the fancy vices from Benchcrafted or Lake Erie, I think I'll wind up with "homemade" leg and tail vises. Still working out design while I'm on vacation. The bowling alley needs some stabilization and flattening, so I need some kind of "ribs" or battens instead of just mortising the legs into the bottom of the benchtop. Keep us posted on what you do for vises.

Re: Weekend accomplishments (pic)

#8

Re: Weekend accomplishments (pic)

Doug Ridley

Looks good and solid.

Re: Weekend accomplishments (pic)

#9

Re: Weekend accomplishments (pic)

clay foster

Nice workbench, Stuart. Looks like it will endure lots of use.

We scored some beech from a tree that had been cut down about 2 blocks from our house. The tree was completely rotten at the base, and was a danger to several homes and office buildings.

We cut three of these big pieces into quarters so we could pick them up, and it filled the back of Jennifer's Ranger. We might get more for a bowl turning class Jennifer is teaching next month at Marc Adams School of Woodworking. I'm going to quarter saw the wood, and make a set of plates and bowls for our personal use.


Re: Weekend accomplishments (pic)

#10

Re: Weekend accomplishments (pic)

Larry in nw ohio

My golly Clay who are you going to make bowls and plates for, The jolly Green Giant. :D Larry

Re: Weekend accomplishments (pic)

#12

Re: Weekend accomplishments (pic)

Andy Lincoln,in Dearborn MI

Nice work Stuart!! That is an awesome looking bench.You should be very proud.

i can't wait to see it with the vises and some action,work in progress photos.

Re: Weekend accomplishments (pic)

#13

Nice haul, Clay!


Re: Weekend accomplishments (pic)

#14

something to do with beech

Bill Tindall

I cut a lot of beech for firewood. It has almost no value as a timber tree so I am glad to be rid of it in the woods. However, it spalts easily, quickly and attractively. (This is not a desirable attribute when trying to dry firewood!)

The spalting can be either white or black on a creamy background. The black patterns can be striking. You might consider covering some blocks with a tarp and letting the fungus have at it. It will spalt in just part of the summer if it is kept from drying.

Be aware if you are trying to dry some that it has a huge difference in shrinkage radial to tangential. This fact may have implications for bowls drying.

It makes great kitchen ware. I think it is more attractive in this application than maple.

Re: Weekend accomplishments (pic)

#15

Spalted beech turnings.....

roger lance

Clay.....a couple of years ago I had to take down a beech in my backyard.....I gave some pieces to a friend who is a turner and posts on Lumberjocks.....there were also pieces of spalted beech that had a wild flame look with red streaking as well....hopefully some of Jim Jakosh's work will be accessible below....

http://lumberjocks.com/projects/67916

http://lumberjocks.com/projects/57103

http://lumberjocks.com/projects/57101

http://lumberjocks.com/projects/69273

happy turning....

Re: Weekend accomplishments (pic)

#16

Nice Bench! Well Done!


Re: Weekend accomplishments (pic)

#17

Headstock shaping

GolfSteve in Calgary

Shaped the headstock & drilled the tuner holes. The shape and slots were were made using a router following a template. I almost screwed it up a few times, and I hate using a router because nothing can destroy your work faster and mistakes are usually catastrophic.


Drilling the tuner holes required a bit of accuracy.

Re: Weekend accomplishments (pic)

#18

Bob

Re: Weekend accomplishments (pic)

Bob

Drop them logs off at my house I will take care of them for you.

Re: Weekend accomplishments (pic)

#19

Re: STUART! WOW! Excellent!

Bob Entwisle in NJ

STUART!

Wow, Congratulations, It looks Great!

In know you've been working on this bench for, what, two weeks?, maybe three?

Really nice job.

And thanks for your having shared the ups and downs and ins and outs of the design and build process both here on the message boards and in the General and Hand Tool chat room.

It's almost as much fun for me to see your bench project completed, as it is to complete one of my own projects, (almost):)

Enjoy it, (course now you're going to have to think up something to build on it)

Bob in NJ