We value your privacy.
We use cookies to enhance your browsing experience, analyse site traffic, and personalise content.
By clicking “Accept all”, you consent to our use of cookies. You can also choose
“Essential only” or learn more.
My faithful Al Mar lock back pocket knife is wearing out after 25 years. The lock mechanism is worn and loose, and the ebony handle insert is broken on one side. I want to replace it with another lock back with a 2.5-3" drop point stainless blade that'll hold en edge and a lanyard attachment. Recommendations?
Having carried the same knife for 17 years and the same model for 21 years I would suggest another model just like the one you currently have. The other thing you might want to consider is sending your knife back to the manufacturer for repair.
About 15 years ago I sent my knife to the factory for repair and picked up something to carry in the interm. That experiance was enough to push me to buy a duplicate of my favorite knife a few years later when the manufacturer re-designed it.
Pocket knives tend to be a very personal choice for those that cary one every day. My grandfather carried a twin bladded little pen knife whose carbon steel blades had been sharpened down so far they looked like toothpicks. He had several other knives, some were even still in their original boxes. I can compleatly understand why he was so attached to that little pen knife It was nothing speciual but it was so familair and useful to him.
For years I've carried a Schrade 50T Old Timer that started life off as a drop point. It's been sharpened so many times it is more like a stiletto. I keep talking about getting a replacement but it's sort of like an old dog. Not much good but comfortable. This is a good option for a replacement if I don't just replace it with another 50T.
Look into getting it fixed up (unless you would simply like a new one instead). They can take care of the broken scale, and probably do something about the lock.
I tend to prefer carbon steel slip joints, so I can't help with replacement suggestions
Several years ago we took a cross-PA trip on US6 to see the Autumn sights. Along the way we detoured to the Zippo/Case factory in Bradford, PA to have the hinge on my 50+ year old lighter fixed. I haven't smoked in 25 years, but it was with me for 10 years in the AF and has my jump wings soldered to it. They fixed it and replaced the innards within an hour at no charge. All the Case line was on display and available, so I purchased the folder with the CV steel blade. It takes a razor edge and the steel blues handsomly. It's my dress knife, but is a bit bulkier and more delicate than I want for general use.
Al Mar knives are pretty nice. If you would like to try something different, check out Kershaw Leek knives. The assisted opening works well and makes it nice if you need to use it one handed. If you want something special, try one of the Damascus models, or if you can find one, the Ti/zdp model.
So I stopped by Cabela's to see if they had anything in the Al Mar or Cold Steel lines, which they didn't, but the knife guy showed me the Kershaw OD-1 1775 MSRP $84.95, for $40. All the features I wanted; I got it.
We have been getting the Smokey Mountain catalog for some time and it is mostly Case knives I think, which are good knives. If you can't find a Case knife that will work for you, you probably can't find anything.
I go there on occasion. They have dozens of manufacturer's brands. The store is huge, half or more the size of Target. It would seem likely that anything one could want is in there somewhere.
Nice knife! Good steel, G-10 on the handle, and the flipper design works well. When they came out with it in orange I about gave in and got one! I may still! Good choice.
I wouldn't know about that Clint, having never looked a gift horse in the mouth , but any Cop Shop sells them, mine stays in a drawer and the knife I always carry is a Shrader "Old Timer"
they have both USA knives and foreign made with German steel. I also bought a cheap knife from china and it quickly became my favorite because it held an edge as good as a Case. My pocket knife is the most used tool I own and I keep it razor sharp all the time. My favorite is a 4 1/8" trapper
I have had buck, boker, old timer and browning knives. Have carried a Boker for almost 32 years now - since I was in scouts. I have several depending on what I am up to. High carbon steel for every day. A bit smaller in high carbon for carving, and a stainless version if I am out on the water for extended periods.