Home Articles Forums Gallery Marketplace Videos

WoodCentral Forums

Knowledge You Can Build On — Est. 1998

100+ Wood Species + Full-Shop Services: Lumber, Veneer, Tools & CNC. Everything in One Place.

have radial arm saws outlived their usefulness?

Posts

Re: have radial arm saws outlived their usefulness?

#26

Re: have radial arm saws outlived their usefulness

Lee Brubaker

>I love it when the RAS comes up for discussion. I bought mine new in 1958 & of course it is an American Machine & Foundry DeWalt. It will be 50 years old next Feb. Mine is the 9" blade model which I think was the smallest made at that time. In almost 50 years I have had one...that's right one kickback.Put a 4ft. 2 x 4 through a gyproc basement partition. Served me right...I did not have the kickback device in use. I still do not have a tablesaw. I do have a CMS which was a retirement gift. I hate the thing. That Universal motor up there by your head screaming away. It's on a folding portable stand & has spent it's life leaning against the shop wall outta the way. My RAS has been moved back & forth across the country & following each move I retuned it & it stayed in tune until the next move.

I have the sabre saw attachment, shaper head, and the router end I use primarily with wood bits to drill parallel holes accurately. The motor can be used with both 120 or 230 volts. Darn fine saw when nested between workbenches allowing a 12ft. plank to be cross-cut with ease.

Simply would not be without it.

Lee

Re: have radial arm saws outlived their usefulness?

#27

Re: have radial arm saws outlived their usefulness

R. Lance in GR, Michigan

>I once knew this guy who wanted to get into the trucking business..hauling freight...all he had was a broke down F-150...he used that pickup for awhile to try to haul freight...was always gripping...dis-satisfied...eventually gave up...and said after that the trucking business was a bad business...lousy way to make a living...etc...tried to tell him that he was really never in the trucking business cause he never really had a large serious truck to use to haul freight...this fact still seems to escape him.

Re: have radial arm saws outlived their usefulness?

#28

Re: Individual preference. *LINK*

Peter Spirito

>I've got a 1973 Craftsman radial arm saw. Recently I ordered on-line new carriage rollers. Yes parts are still available. The table top is at least 10 years old. I keep thinking about replacing it but it is still dead square and I do like the "patina" of the various project that have graced the table top. The base is a Craftsman work bench with the legs cut off and mounted on an angle iron frame with wheels. Check out "In The Woodshop" at www.peterspirito.com


img

Peter Spirito home page

Re: have radial arm saws outlived their usefulness?

#29

Re: Individual preference.

Larry in NW Ohio

>Peter The "GOD bless America" is absolutly beautiful, brought a tear to my eye. Thank You Larry in Ohio

Re: have radial arm saws outlived their usefulness?

#30

Your point?

henthorn

>