Home Articles Forums Gallery Marketplace Videos

WoodCentral Forums

Knowledge You Can Build On — Est. 1998

Combination Press Plough Plane

It's time to pull together to help one of our own.

Posts

Re: It's time to pull together to help one of our own.

#26

I just posted your message on WTU forum


Re: It's time to pull together to help one of our own.

#27

This is a very real offer, here's my thoughts

Doug Thompson near Cleveland

I could send him a check to help right now which wouldn't cover the building OR I can put the money in the business and sell product and more than double the amount donated... it's simple numbers

Re: It's time to pull together to help one of our own.

#28

I'm in.

Ray Carson - Lawrenceville, NJ

I don't know Jorge but I believe in Karma. I'll buy something Doug.

Re: It's time to pull together to help one of our own.

#29

Re: It's time to pull together to help one of our

robo hippy

I know both Doug and Jorge. Both outstanding people, though I have yet to meet Jorge in person. This comes at a time where 2 of my 5/8 V gouges are nearing 'nub' size. I will order.

Now, some one has to quickly invent the transporter so we can have an old fashioned shop raising....

robo hippy

Re: It's time to pull together to help one of our own.

#30

Dick Hines

Re: It's time to pull together to help one of our

Dick Hines

You are a good man Doug Thompson. Count me in. You can never have to many Thompson Turning Tools!!!!!!

Re: It's time to pull together to help one of our own.

#31

Re: It's time to pull together to help one of our

Paul Millo

Count me in.

Re: It's time to pull together to help one of our own.

#32

Re: It's time to pull together to help one of our

Mac Ray

Jorge was not at our meeting tonight.....I brought the subject up and I think probably we will do something equivalent to a barn raising ......lots of promises of labor....and help from here....I suspect that Jorge is going to find friends he didn't even know he had.....thank you Doug for starting this...........I have Jorges e-mail and physical address....but he isn't too sure about putting them out on the net,so I won't do that.....maybe we could give them to Doug and he could give them to anyone interested in sending something directly to Jorge.......the way I see this is......I don't need any more tools than I have and rather than buy something from Doug that will cost him,I will send what I can directly to Jorge.....what are your thoughts on this?

Re: It's time to pull together to help one of our own.

#33

Re: It's time to pull together to help one of our

Jeff Smith

I'm in - reposted to Sawmill Creek turner's forum, too.

Re: It's time to pull together to help one of our own.

#34

Re: It's time to pull together to help one of our

Bill Turpin in WNC mountains

I just posted this to the North Carolina Wood Workers site. This is too good of a deal to miss.

Re: It's time to pull together to help one of our own.

#35

Re: Just called the club pres to have a bulk email

Ivan Clark

I need to find the list of what I gave Mandy for Christmas last year, I included some of Doug's pen turning sized tools and a 7" handle as part of her present. I should round out the set after I double-check the collet size.

I figure that I will pick up some medium-sized bowl gouges and an extra handle to share between Virginia, Paul, and me. I may try to get creative with the name for that handle and see how long it takes them to read it.

I already have the large skew and gave Paul the large roughing gouge and handle last Christmas.

I am being tempted by the Mark St Ledger gouge as well, but it has been long enough since he demoed here that I am having trouble remembering why I want that one (other than it is one that Doug makes).

How about you?

Re: It's time to pull together to help one of our own.

#36

Re: It's time to pull together to help one of our

Bob Delio

Doug,

Great offer. I am also a club member with Jorge, so will make a purchase, send him some additional funds and volunteer to help rebuild his shop. Count me in Mac.

Re: It's time to pull together to help one of our own.

#37

Re: It's time to pull together to help one of our

Leon Lowell

What a great offer, and a great excuse to buy anther tool. I am proud to be a part of such a group.

Re: It's time to pull together to help one of our own.

#38

Re: It's time to pull together to help one of our

Kyle Iwamoto

Thank you Doug. You are truly one of a kind.

Re: It's time to pull together to help one of our own.

#39

Re: It's time to pull together to help one of our

Jeff Brockett

Doug, I sent the information out to the members of the Tennessee Association of Woodturners. This is an amazing offer!

Re: It's time to pull together to help one of our own.

#40

Re: Just called the club pres to have a bulk email

Clifton C

Ivan, I like good tools, and don’t mind buying…I have two of Dougs 1/8 inch parting tools.

One sharpened straight across, the other slightly skewed that I usually use unhanded.

The problem is they sometimes get dinged up when traveling, so…seven inch handles

for them so I can reverse the blade when on the road. I don’t want to count all the other

D. T. tools I have cause it might sound like I’m bragin. Mark St Leger has a 5/8 SRG

I use for box making but it’s also great for a traveling kit. I know you know what a spindle roughing gouge is so I wonder if you are thinking of Al Stirt’s 1/2 inch shallow flute detail gouge sharpened at 60 degrees. Check out his website for pics (it’s a D.T. tool). He uses it for a few things but for me it excels at cutting beads on bowl rims and for beads on platters and other faceplate work. It’s a nice clean cutting tool that doesn’t talk back. But, no worries, you can’t go wrong with whatever you get. So, for me the handles for sure...but you know something else will end up on the order...

c

Re: It's time to pull together to help one of our own.

#41

Doug, you're the best

GaryG in MD

I have plenty of your tools, but I'll find something to "need".

I am passing this on to all members of Montgomery County Woodturners and to the heads of several other regional clubs. Thanks for being you, Gary

Re: It's time to pull together to help one of our own.

#42

Re: It's time to pull together to help one of our

Jack Enders

Doug, I'm in.

Jack Enders, Montgomery County Woodturners MD

Re: It's time to pull together to help one of our own.

#43

Re: It's time to pull together to help one of our

Brian Roberts

Thoughts and prayers go out to all involved.

I just placed my order.

Re: It's time to pull together to help one of our own.

#44

i'm in


Re: It's time to pull together to help one of our own.

#45

Re: Just called the club pres to have a bulk email

Ivan Clark

Clifton, As you said, saying how many D.T. tools are in the shop might sound like bragging. I have been very lucky at a couple of estate sales in addition to the money that has gone directly to Doug. I spent some time at his table at each of the VA symposia.

Paul's favorite turning tool is the roughing gouge. I managed to get to Doug's table at the symposium when the rest of the family were not around and got Paul one of Doug's 1-1/4" spindle roughing gouges and a Lathe Master handle to go with it. Sneaking them home was a bit of a challenge since I was riding with them and did not have a key to the car. I managed it, though. Doug lists the spindle roughing gouge under Other Tools Available rather than on the Spindle Gouge page.

I will check out the site that you mentioned later. I picked up a slightly used 1/16" parting tool a while back and that is my go-to parting tool since I fixed the grind on it. I got hooked on it making the honey-dipper style Christmas tree ornaments at the club ornament class last year.

I need to check the shop for which handles I have, as well. I have been out of the shop for so long between work and the weather, that I need to do some cleaning tomorrow. I don't think that my 7" handle made it to the turning tools drawers and I don't remember which collet size I bought for me, either.

-Ivan

Re: It's time to pull together to help one of our own.

#46

Re: It's time to pull together to help one of our

John (Jack) Shelton

Invoice 0520839742747511 amount$157.00

Re: It's time to pull together to help one of our own.

#47

Re: It's time to pull together to help one of our

Dale Bonertz

How are you a placing orders? I thought it started at midnight tonight.

Re: It's time to pull together to help one of our own.

#48

Re: It's time to pull together to help one of our

Peter Lamb

It does!

Re: It's time to pull together to help one of our own.

#49

Re: It's time to pull together to help one of our

Brett Schenk

Heard it through the Honolulu Woodturners' 'Coconut Wireless'.

Will be sending my Aloha for sure!

Brett

Re: It's time to pull together to help one of our own.

#50

Re: It's time to pull together to help one of our

david

Transaction ID #2V51018121057262Y, two scrapers; invoice amount $152.00

Thank you Doug for doing this.