Home Articles Forums Gallery Marketplace Videos

WoodCentral Forums

Knowledge You Can Build On — Est. 1998

A55 Smoothing Plane

Where does your AAW club meet?

Posts

Where does your AAW club meet?

#1

Where does your AAW club meet?

??????????

Where does your AAW club meet?

Does the club pay for the use of the room? If so how much?

Does the club have any on sight storage?

How much does your club charge members for dues?

It seems my club has outgrown our current venue.

At this point the officers want to look at the options.

Please don’t guess public who or where as do not want to burn our current relationship. Or worse damaged some other clubs venue relationship.

Re: Where does your AAW club meet?

#2

Re: Where does your AAW club meet?

josh bowman

Where does your AAW club meet?

Does the club pay for the use of the room? Yes

If so how much? $50 per quarter

Does the club have any on sight storage? Yes, for lathe and video

How much does your club charge members for dues? $40/year

We also push hard a wood auction, it pays easily for the building expense. We also provide and ask for donations for snacks. Lastly we have a Christmas Party and silent auction, the auction is stuff from members and demonstrators. It brings in a fair amount and is a boost to our bottom line.

Re: Where does your AAW club meet?

#3

Re: Where does your AAW club meet?

??????????

Josh thanks for the reply but where do you meet is it a school, a church, a home, a retail store, community center or some place I had not considered?

Re: Where does your AAW club meet?

#4

Re: Where does your AAW club meet?

Mark Wollschlager

We meet in a public school.

We pay a facility fee of ~$250 per month about 2500 per year ( 10 meetings )

Storage for lathe, video equipment, and video library and supplies.

Dues are $35 for most members. We have reciprocal agreements with other clubs in the area with discounted membership to multiple clubs, $20,

Most demos by professionals held during meetings are $10.

Workshops and skill enhancement sessions ( 2 per most months) are held at the shop of a member on club owned equipment. Skill enhancement sessions are $20

Re: Where does your AAW club meet?

#5

Re: Where does your AAW club meet?

Mike Foster

We have a relatively small club in VT and meet for a 4-6 hour session every other month. We were lucky to have one of the founding members be a shop teacher at a private highschool with a nice, large shop equipped with 4 lathes (2 lagunas and 2 delta midis). It has a fairly large open space. Our group numbers about 20, but slowly growing. The school has us sign waivers every meeting, but we get the use of the room gratis. The school just received a grant from the Granite State Woodturners for a new lathe. We met yesterday and had Hannes Michelson do a demo of his full size hats for us on a new Powermatic that the school got during the recent sale. Our club members have donated money to buy a chuck and outboard turning rest for the lathe. So the school wins, the club wins and everyone is happy. This arrangement has worked well for us and we hope it continues into the future. May not work with a larger club on the size of 100 or more though.

Re: Where does your AAW club meet?

#6

Re: Where does your AAW club meet?

robo hippy

Well, I belong to 3 clubs. The Umpqua woodturning club in Roseburg meets at the local high school in their wood shop. No dues, but there have been mentors to the school, and the club bought a PM3520B for the school. The Beaver State Woodturners meets at the local Woodcraft store here in Eugene. No dues, no fees, and we get a discount on tools. The store chipped in a little to get Jimmy Clewes to come in and demo. The Willamette Valley Woodturners meets at a Plus 50 Center in Salem Oregon. Can't remember the dues, but $30 or $35 per year dues, or is it $40 now.

robo hippy

Re: Where does your AAW club meet?

#7

Chuck Jones - West TN

Re: Where does your AAW club meet?

Chuck Jones - West TN

- Since last November our club usually meets at a community college.

- No monetary exchange, but we agree to teach at least two adult education classes per year.

- Storage has been a bit of an issue, but we are gradually working that out. The college staff has been extremely cooperative.

- Dues are $25 regular member, $35 family membership.

- Our club currently has 28 registered members.

- Usually 20-30 in attendance.

We always have one meeting in the fall at my farm and shop.

We have a holiday luncheon at a very nice volunteer fire station where one of our members is a fire chief.

Re: Where does your AAW club meet?

#8

Re: Where does your AAW club meet?

jim breeden

We meet at WoodWorkers Supply, no charge. Storage for one lathe, all others stored off site. Dues are $25 a year, $30 for family. We have definitely outgrown our venue - 150+ members, of which approx. 40-50 attend each meeting.

Re: Where does your AAW club meet?

#9

Re: Where does your AAW club meet?

Dick strauss

We meet at a church and pay $20-30 per month (I forget because we just chaged sites recently). We do have some on-site storage in a boiler room and a utility closet. We made our lathe portable so that it can easily be moved into the storage area. We just upped our dues from $25/person and $35/family to $35/member/family a few years ago.

We also have a raffle for wood/tools/etc that folks bring in to share. Usually everyone that bought a raffle ticket goes home with at least one piece of something because of our overall member generosity. Usually the money raised from the raffle is enough to offset our monthly site fee.

Re: Where does your AAW club meet?

#10

Re: Where does your AAW club meet?

Scot in Falcon

Where does your AAW club meet?

We meet at a local art center. Our meeting space has recently become a Maker Space, which seems to be a positive change for us.

Does the club pay for the use of the room? If so how much?

We pay $600 / year and meet once a month. In addition, we have always made Christmas ornaments to donate to the art center. They sold them during the holidays and got to keep whatever they made off them.

Does the club have any on sight storage?

Yes, we have a cabinet that we built that stores the lathe and has a couple of shelves to store other club related items.

How much does your club charge members for dues?

$25 per year. In addition, like most everyone else, we have a wood raffle every month to help offset costs. When a demonstrator kindly leaves the club a demo item they turned, we auction them off to the club members. Also, in the past we have had wood sales to benefit the club.

Re: Where does your AAW club meet?

#11

Re: Where does your AAW club meet?

Bill McWhirter

Where does your AAW club meet? In the cabinet shop at our local technical school. We also have a mentoring session most Mondays at a members workshop.

Does the club pay for the use of the room? If so how much?

Fortunately, no. community outreach. We just HAVE to leave it like we found it. We meet on a Saturday morning when there are no classes.

Does the club have any on sight storage? We have space to store our 3520 and a cabinet for our AV equipment.

How much does your club charge members for dues? $35 per year for an individual. $40 for a family.

If we have a paid demonstrator, we charge members $10.

Members bring wood for a raffle an most who buy tickets leave with at least one hunk of wood.

Re: Where does your AAW club meet?

#12

Brad Vietje

Re: Where does your AAW club meet?

Brad Vietje

One of my clubs is the same one Mike Foster mentioned.

The other is the Twin State Woodturners, and we alternate between two high school shop spaces, one in St. Johnsbury, VT, and the other in Littleton, NH. We have agreed to work with the woodshop teachers (now called industrial arts) in both locations, in exchange for use of the facility. We have members who sought out and refurbished 3 older lathes (2 Delta's and a Powermatic-45) for the one school, and wrote an AAW grant to purchase tools and chucks for these machines. We have our own insurance, but we are covered by the school policies, also.

We usually average about 20 in attendance when we meet in Vermont, and a few more -- 25-30, when we meet in NH. We have access to storage, but the lathes belong to the host school, so they stay put. We sometimes encourage members to bring mini/midi lathes when we are setting up multiple stations to encourage everyone to try turning hands-on, or for larger projects like making pens for the troops, etc...

Safe spinning,

Brad Vietje

Newbury, VT

Re: Where does your AAW club meet?

#13

Re: Where does your AAW club meet?

Glen Key

I'm a little late to this thread.

Club I belong to has it's own building. It is a concrete tilt up building that I think is close to 150' X 60'.

It is located in an industrial complex on the east side of Tulsa.

We have 9 full size lathes set up ready to turn, 4-PM3520B's 5-Jet 1640(not sure about the model numbers), a 20" grizzly bandsaw in it's own room and a photography room with lights.

You get 9 lathes running in one room even with air scrubbers(2) running it still gets dusty.

Our meeting room will hold 125 members, but it gets tight.

Membership pays $40/year, we have 4 turners in a year.

The Saturday demo is $20/25, a one day hands on runs $100.

We are starting to get some turners in that like to have more than single day classes when they do that it is $100 a day X how many days you are in class.