We have a 1/2 of ice and now it's snowing on top of that. Couple that with temperatures that are supposed to get down to -8 and you have a mess. Middle Tennessee isn't set up for this. People are starting to lose power. So far I'm OK but it sleets for a while and then snows for a while. Tree limbs are starting to sag and that's not a good thing.
Best wishes, John. Even up here where we expect this sorta thing and like to brag about how tough the weather can be, some storms are dangerous.
We always fill a few big containers with water, and make sure we have our candles, flashlights and batteries ready. Good to have a wood stove, too; we have wood heat and while we cook with propane, we can cook on the wood stove (or melt snow on it) if we need to. We also have composting toilet, so we don't need electricity, but it sure makes life a lot more convenient.
Well, too sunny here for me. Pussy willows and ornamental plum trees are blooming, dandy lions and lawn daisies are up, high temp today about 65. Way too early.... I actually love the rain and cloudy days. Worked out in the sun too many days...
Brad I've got canldles, water, hurricane lamps, a gas grill, a sleeping bag,flashlights, Kerosene heater and a warm dog. I'm ready. If I still had my foot powered lathe I could work but i took it apart last month. I'm worried about my Fiance. The roads are too bad to try and get there. She and her son aren't as prepared as I am.
Over in West Tennessee it's pretty much the same as John describes, except the precipitation seems to be over for now. I'm looking at the NWS website and I don't see an above freezing temperature for this area until Saturday. NWS is showing -5 for Wednesday night, wife says local tv channel said 10. Usually the tv exaggerates in the other direction to stir up viewers and sell advertising, so I'm guessing they accidentally left off the minus sign.
You all are making me green with envy, pun intended. With this last snow, it will be early May before we see bare ground and probably mid June before we can plant the garden, as the soil will be too wet and cold much before then. We have more coming on Weds so we should be over six feet on the ground. I can only see out the top one quarter of the shop windows because the snow coming off the roof is piled really high against the side of the house. Fortunately, I have been taking the snow off the roof, with a roof rake, after each storm. Several folks have had shed and garages collapse here in the last couple of weeks. There is a great local sign which sums it up for me though. "Spring is a lot closer now than it was in September". Have to think positive. Hope everyone is safe and warm where the current storm is.
Here in western CT we had a freak warm day in mid January with a full day of rain, plenty of rain!
over frozen ground partially covered with snow. Of course the water froze during the night and we had two three inches of ice since then. Now on top of the ice there is between two and three feet of snow depending on the drifts. The ice makes plowig the snow easy, if this might console us. Today I went to the shop as usual but after a couple of hours had to go home. Too cold. The usual fourtyfive degrees seemed so much colder than usual. I do not know why.
Here in central Va it's snowing like mad. It is a very dry snow. Just need a broom to clean the steps off for the dogs. Of course it's snowing so hard that I also have to sweep the steps off when they want to come in.
My shop was surprisingly warm. I packed more boxes and then turned some pieces for my April demo. I may have the shop packed and stored during that time so I had to prepare all the work and pack the tools I need for that demo. When I get back from the Florida demo I'll pack the few turning tools that aren't already in that box. Man I'm gonna hate those 65 degree temps in Florida. It takes me all winter to get used to the cold and just one day to get used to the heat so I'll be miserable when I get back.
Tonight is when I'm worried. Don't know if my pipes can handle -8. I did repair them a few years ago when one broke from the cold. I put more insulation and taped the joints. Not sure there's much else to do. I'd put a heater down there but nervous about leaving a heater un attended overnight. It's probably safe but that WHAT IF thing keeps popping in my head.
...appeared after we received about a foot of snow yesterday. Now the dangerously low temps are the concern, as the lows in the next few days will be well below 0 F and highs might make the teens! I'm in hunker down mode!
If the temp's start threatening to freeze the pipes, and you've already done what you can with insulation, heat tape, or a lamp near any exposed pipes, you could consider leaving a trickle running through the pipes. Generally -- but not always -- running water does not freeze, since there is 40 - 50 degree ground water running through the pipes and fixtures. Not a sure bet, but should work for a few sub-zero nights.
My well runs first to the unoccupied and unheated old house, before running up the hill underground to the new one. Pipes are in a small basement, up against an uninsulated 120-year-old concrete wall and could/would freeze w/out heat. I built a 2' x 3' x 6' "coffin box" around the exposed pipes with 2" blue board (and put a sheet between them and the concrete), and I have a lamp with a 40 watt oven bulb inside, which keeps the temps around 40F all winter. 40 watts x 24 hours is 960 watt-hours (0.96 kWh) per day, or about 29.7 kWh per month, which comes out to about $4.75/month even with our very high electric rates -- well worth it!
Probably 80% of what I know about heat, cooling, and insulation I've learned from your thread. So I'm certainly not qualified to disagree. But I am surprised and curious that fiberglass gets such a bad rap. Fiberglass is by a long shot the most used product for wall insulation in this part of the country. You clearly said local variations have a lot to do with it and most any time (except this week) this locale could be said to have a mild climate. Pretty much the same as where John Lucas lives, maybe a little warmer. A heck of a lot warmer than your area, I know because we've lived in the NE.
I have been very pleased with the performance of the insulation in my shop and for whatever it might add to the discussion here is my situation.
The original building is 32' x 48' (~1500 sqft) with a 10' x 12' "insulated" garage door at each end. I recently added a 32' x 24' (~750 sqft) extension on to the back with a 10' x 12' and a 6' x 7' insulated roll-up door.
I normally heat or cool only the original building, but both are constructed and insulated the same way.
From the outside-in the walls are sheet metal cladding, "bubble wrap", 5.5" of fiber glass insulation with paper backing, and 3/8" beaded plywood interior wall covering.
The ceiling is 12' high covered with sheet metal. I have about 15" of blown in cellulose in the attic.
My only source of heat is a medium sized wood burning stove.
For a week or more we have seen single digit nights with below freezing highs. Last night's low was about 14. I let the fire go out yesterday morning. No heat until mid morning today. When I went to the shop this morning it was 51 degrees, about the lowest I've ever seen it.
Not advocating, selling, or debating, just pointing out what works well for me.
My son is reworking his shop right now so we are very interested in this subject and watching and reading everything we see. I find it a very complicated subject and one I have not spent much time thinking about.
Your insights are most appreciated. Thanks for taking the time and sharing.
Brad, like chuck I appreciate your incite into the subject of insulation. On e of the things that makes this a very complicated topic is the fact that this is a very large country with a number of differing climates. As far north as you are your situation is dominated by the cold part of the year. A heating climate. In the deep south it is dominated by air conditioning. An example is that if you install vinyl wall paper where you are, its beneficial as an excellent vapor barrier. In south Florida They installed vinyl wall paper in nursing homes over wheat paste. Moisture migrated inward from out side and accumulated behind the wall paper a turned it into a mold factory.
So, solutions are not universal.
In VA we live in a very difficult climate. Balanced between heat and AC. difficult what to do with vapor barriers.
Back in the early 70's I was building using what was Called Arkansas framing. I still live on one of them. For the last thirty years I have been a Home Inspector. Some of the houses I built back then are still operating cheaper than what the builders are building now. I am interested in building a new house and would like to understand the state of the art now better. Do you have any suggested reading?