That's a hoot Gerald, LOL
Dick Coers
Suggesting your logic will improve Brian's post. I love that kind of thinking!
Knowledge You Can Build On — Est. 1998
That's a hoot Gerald, LOL
Dick Coers
Suggesting your logic will improve Brian's post. I love that kind of thinking!
Re: Powermatic 3520B tool rest
Sergio
Sorry, you are wrong. The powermatic 3520'costs $3999 the vicmarc Vl 240, which has similar capacity to the 3520 costs $4995. That is less than a thousand dollars for a different class of machine.
The VL300 is just above $6000 but is a diffent lathe with a fix head etc.
Re: No one said by a Oneway or Robust lathe
Sergio
Going around and beyond the topic is not necessrily bad. It helps people make more educated choices. A powermatic lathe (which in Europe is sold as Jet for marketing purposes) is a generic machines made by an anonimous factory and marketed with a name. A Vicmarc, Robust and Oneway are machines made on a specific design. Costs reflect the technical differences and the number of sold pieces. When I was thinking of changing my Jet 1642 2HP I was considering the Robust sweet sixteen since I could not efford the bigger one but that did not improve the capacity of the lathe. The oneway were too bulky for my shop. I did not even know the existence of Vicmarc that is so under advertised and overlooked. Then I red a post in a forum that mentioned the vic and that changed my perpective. After an initial problem that was solved i'm very happy I made the choice I made and as I said I hope I will be able to buy the VL240 as a second lathe.
Re: Powermatic 3520B tool rest
david delo
The 3,999 for the 3520 is a retail price but it's almost always 10% off somewhere and 15% off or 3,499 from a half dozen suppliers a couple times during the year.
Re: Powermatic 3520B tool rest
Brian
Whew....y'all sure have your favorites...and seem quite offended by anyone who disagrees.
My point was simple....the old was better than the new...and if they deep-sixed the door on the tailstock casting (does anyone really think it is of any use?) they could upgrade the new style to the old style and it would still cost less.
So....what the heck is the deal with the door........ :o)
Peace,
Brian
Re: Powermatic 3520B tool rest
Joe Bradshaw
Brian, I don't have a 3520, but, I have turned on one numerous times at John Campbell. I agree with you that the banjo needs some work. My personnel lathes are a Oneway 2436, a Oneway 1224 and a Robust Liberty. I changed out the banjo on the Robust for a Oneway banjo and have really enjoyed it. YMMV.
Joe
Re: Powermatic 3520B tail stock door.
Doug Wolf
Brian,
Now you've done it!!!
Don't ever start bashing the door on the tailstock. I love it. I have used it from the time I purchased my 3520B. It utilizes what would be wasted space. Very handy for storing my extra tail center cones of various sizes.
PS: I use two locking screws on my banjo post if I need the extra locking of my tool rest.
Re: Powermatic 3520B tail stock door.
John Lucas
Im confused by all the trouble with the powermatic banjo. Mine locks and unlocks very easily. When I've demoed on oneways the banjo locks very easily but I've had to work harder to unlock it. The Robust I've demoed on lock and unlock with 2 fingers. I do understand about the tool post lock
Re: Powermatic 3520B tail stock door.
Brian
Hi John....
My comment referred only to the tool rest post clamping system.
Honestly I didn't even check out the clamping of the banjo to the bed.....
Brian
Re: Powermatic 3520B tail stock door.
Mike Brazeau
With the Oneway you only have to use a gentle push on the banjo locking lever. Problem arises when you use the some pressure as other lathes.