Re: opinion of locust as carving mallet
William Duffield, on the Cohansey
I have a beetle (for froes) of black locust. I also have made carving mallets of hard maple, dogwood, purpleheart, bloodwood, bitter orange (Poncirus trifoliata), white oak, cocobolo and others, but my favorite is hophornbeam. You can also use hornbeam. I would not use honey locust (but the Janka hardness numbers already told you that). I also have some lignum vitae stock that I will probably turn another mallet from, some day.
For accurate hardness numbers, both side grain and end grain, and other pertinent dta, like tendency to split when struck across the grain (you'll find big numbers in that column for ash and hickory, which also make good mallets), reference the USDA Forest Products Lab, Center for Wood Anatomy Research. If locally available, mulberry, live oak and elm also are suitable.
Sometimes, even without being able to identify it as to species, you can find excellent mallet stock in pallets, especially those that originate overseas. OTOH, a lot of pallet wood is totally unsuitable, so you will need to experiment. If you can't dent it with a fingernail, and you can raise a nice curl with a well tuned card scraper, it is worth investigating further.