Home Articles Forums Gallery Marketplace Videos

WoodCentral Forums

Knowledge You Can Build On — Est. 1998

This $39 jig will make you a WOODWORKING GOD!

Before power tools

Posts

Before power tools

#1

Before power tools

david

Steven Antonucci asked how bowties were made using only hand tools. Much like Mr. Nakashima probably did, the bowties were carefully cut out using had tools, and with the early Hawaiians, it probably was without chisels. What amazes me is not so much the bowties but how they achieved such beautiful forms for their calabashes using only rudimentary tools for carving and shaping. Probably used fire to char the wood and do some rough shaping. BTW, bowties were not the only stitching method, because splines of various types were used too.

Re: Before power tools

#2

Re: Before power tools

John Lucas

Ditto on how they made the beautiful forms. That is tough. I've made butterflies by hand Make the butterfly. Lay it on the work and Sri e a mark around it. Then carve. The top side is easy. Getting the hole clean enough and straight enough all the way through is really tough. Patience and a very very sharp tool are essentials Obviously using a router greatly sipped up the process

Re: Before power tools

#3

Re: Before power tools

Phillip Medghalchi

David, I once watched a Japanese master artist do some carving with very unusual tools and I was blown away how meticulously they work and the pride they put into their work.

I think that was the essence of their work, and plus that was their lively hood, not a day job and night hobby. Just the simple life and pride made them that masterfully skilled in what they did. Of course there was no TV's and the internet to run to either. :b

Re: Before power tools

#4

Mike Stafford

Re: Before power tools

Mike Stafford

David, there is a PBS show around here called The Woodwright's Shop with a guy by the name of Roy Underhill. It is a woodworking show about traditional hand tool woodworking and has been on the air for more than 30 years.

Roy has on a number of occasions shown how to make dovetail keys and their corresponding patch holes using a saw, egg beater drill and chisels and a knife. Of course the traditional Hawaiians may not have had access to exactly those tools but I imagine they did something similar with the tools they did have.

I used to use dovetail keys for decorative effect on some of my flat work wooden boxes with a router and template.

I imagine there are some folks on the Hand Tool forum who could provide information about the traditional methods.

Re: Before power tools

#5

Re: Before power tools

John Lucas

I forgot to mention that its handy to have a healthy vocabulary of 4 letter words before you do your first hand cut dovetail.

I am a fan of rou underhill. Learned a lot from him. Make that Roy Underhill. Damn phone. I was demoing on my foot powered lathe one day and some guy came by and said wow that just like Roy Underwear

If you want to have fun go to youtube and type in Appalachian woodturner. You should find a video of me tuning on my foot powered lathe that some students made of me a long time ago

Re: Before power tools

#6

Re: Before power tools

Phillip Medghalchi

John, that's funny. I am sure Roy has been called many names.