Home Articles Forums Gallery Marketplace Videos

WoodCentral Forums

Knowledge You Can Build On — Est. 1998

Premium Live Edge Slabs, Hand-Selected in the Berkshires. Shop Unique Hardwood Pieces.

TURNINGWOOD.com Black Friday-CyberMonday Sale

Posts

TURNINGWOOD.com Black Friday-CyberMonday Sale

#1

TURNINGWOOD.com Black Friday-CyberMonday Sale

Steve Worcester

The Biggest Sale of the YEAR!

Call it the Thanksgiving to Cyber Monday Sale 11/27/14 - 12/1/14

We have discounted a ton items in the store, plus if you click on the TURNINGWOOD.com banner in the Woodcentral Turning forum you will see our newsletter witht the code for an extra %10 off on everything, and free shipping in the US!.

2" and 3" Mirka Gold 50 packs 80-600 grit have been reduced. Select Hunter tools, pendant jig combos, a bunch O' stuff.

5" Abranet is on closeout!

The bad part is they don't show up as sale prices because of the current software.

Re: TURNINGWOOD.com Black Friday-CyberMonday Sale

#2

Re:  TURNINGWOOD.com Black Friday-CyberMonday Sale

Joe Donohue

Steve, maybe this is just me but I am unable to locate the TurningWood.com banner.

Would you please post a link?

Joe

Re: TURNINGWOOD.com Black Friday-CyberMonday Sale

#3

Re:  TURNINGWOOD.com Black Friday-CyberMonday Sale *LINK*

Steve Worcester

The banners change when you are looking at a post in the forum, you would have to refresh until you see it.

Your idea was better


TRY THIS LINK

Re: TURNINGWOOD.com Black Friday-CyberMonday Sale

#4

Am willing to pay a premium...

david

for sanding mandrels that have the hook pad fastened to the backing material with a solvent-resistant adhesive. When I wet-sand using oil/Watco as a lubricant, the hook surface inevitably gets saturated with the lubricant and separates from the backing. Have opted to glue the hook pad back with epoxy, but this is a PIA.

CONGRATS to Steve for not limiting his current free shipping policy to the lower 48. We often end up with the fine print disclaimer.

Re: TURNINGWOOD.com Black Friday-CyberMonday Sale

#5

Re: Am willing to pay a premium...

Steve Worcester

Based on your email address, you are in Hawaii (love that place and would live there if I could make the same as on the mainland which I would need to if I wanted to live there)

What I would recommend for gluing on velcro is Wellbonds contact cement, but not the water based. The stuff where it says in the warnings to turn off the gas for the water heater stuff.

The water based isn't as durable or heat resistant. You can use Shoe Goo, Epoxy, and CA , but it isn't as flexible and with rounded objects can lead to issues of sanding marks especially from the edges of the pad, just too stiff. You can mitigate that by using a softer interface pad, which will help with forms that are more concave anyway.

As far as the shipping charges, we use USPS exclusevely and they don't care about which state you are in. Mahalo (if I got that correct)!

Re: TURNINGWOOD.com Black Friday-CyberMonday Sale

#6

Mahalo back to you, Steve!