Home Articles Forums Gallery Marketplace Videos

WoodCentral Forums

Knowledge You Can Build On — Est. 1998

Build it. Rock it. Rockler has your woodworking tools.

CA finish pens...We have a problem Houston!

Posts

Re: CA finish pens...We have a problem Houston!

#26

Re: CA finish pens...We have a problem Houston!

steve worcester

if the fissures are round, it is bubbles which is gasses trapped and then "exploding" off gassing actually.

If they are elongated, it is open pores that aren't filled, or filled with trapped CA, which means you need to and more and fill them. Those are where you would use some more thin and then after level (look at it with a 10x loupe) you can use medium.

Re: CA finish pens...We have a problem Houston!

#27

Ric Taylor

Warren

Ric Taylor

Warren,

As GaryG mentioned, you are correct in saying that not all 400 grits are the same. Buying whatever 400 grit sandpaper happens to be on sale is definitely not the way to go.

I am in the process of using up all of my sandpaper that is NOT Norton or Abralon. When I have used up all of those other brands, I will use only Norton and Abralon, which will insure that in my inventory of sandpaper, all 400s, etc., will be the same.

Ric

Re: CA finish pens...We have a problem Houston!

#28

Re: Warren

steve worcester

The problem you may have is that Norton being a USA manufacturer uses (I am guessing) the CAMI or ANSI grading and Abralon (Mirka/Finland) uses a FEPA or "P" grading.

The USA grading shows a 400 grit at 30 Microns and the Euro (P) shows 400 grit at 42 micron. About USA equivalent of 340 grit. Probably not an issue depending on if you are sticking with one vs crossing over from one to the other.

If you stick with a reputable brand and go through their grit system, you're fine. Grits stated are a +/-. Depending on quality control for that manufacturer, there is going to be an x% above and below the micron size that gets applied to the backing. When I find my grit chart, I will upload it to here and you can see the diffs.

Re: CA finish pens...We have a problem Houston!

#29

Ric Taylor

Re: Warren

Ric Taylor

Steve,

You may have misread my message. I'm not having a problem, my message stated a solution to issues that others may be having. I clearly understand what is happening.

By the way, Norton is not made in the U.S. It is made in Canada and uses the "P" grading system.

Ric

Re: CA finish pens...We have a problem Houston!

#30

Re: Warren

phillip Medghalchi

Here it is:



and