Home Articles Forums Gallery Marketplace Videos

WoodCentral Forums

Knowledge You Can Build On — Est. 1998

100+ Wood Species + Full-Shop Services: Lumber, Veneer, Tools & CNC. Everything in One Place.

Anyone use gaiters when turning?

Posts

Anyone use gaiters when turning?

#1

Anyone use gaiters when turning?

Philip F Duffy

Doc says I need to put some protection on my lower legs when working at the lathe. Too many injuries and too much risk of punctures. First thought was to build something out of thin wood strips and leather. But the idea of gaiters came to mind and I just wondered if anyone has tried them for chips control, protection from tools that fall, etc.?? Philip

Re: Anyone use gaiters when turning?

#2

Re: Anyone use gaiters when turning?

John Lucas

interesting. I have been turning for a very long time and never injured my legs at all. Punctured the top of my foot one time when I dropped a skew. To answer your question I purchased a pair of those things to put around your shoes to keep shavings out of your socks. Have never pulled them out of the bag. I guess that wasn't as big of a problem as I thought.

I often wear shorts when at my lathe and gaiters would not protect my knees. If I wear long pants I usually have socks on also so I don't see how they would help there either.

Now the leggings they sell to protect your legs from chainsaws is a good idea. Don't have those yet but they do work, I had a friend test them the accidental way.

Re: Anyone use gaiters when turning?

#3

Re: Anyone use gaiters when turning? *LINK*

Ralph Lindberg

I had thought you were thinking on keeping chips and dust out of your socks and shoes, but...

What you really are interested in is leg-armor.

Honestly, the thighs really would be protecting the lower-leg from most things, so you might only need to protect that

A thigh length leather turning apron may be an answer

either that or full leg armor (which I do have, but that's another story)

But honestly in a decade of turning I can't recall any time anything has happened that might endanger my legs


leather turning apron

Re: Anyone use gaiters when turning?

#4

Re: Anyone use gaiters when turning?

Michael Gibson

Well you was at the doctors, so what injuries did you do to your legs? Michael

Re: Anyone use gaiters when turning?

#5

Re: Anyone use gaiters when turning?

Barry Irby

Perhaps you could get some assless chaps.

Re: Anyone use gaiters when turning?

#6

Re: Anyone use gaiters when turning?

phillip Medghalchi

Phil, look into the shin guards at your local gardening or lawn mower and trimmer store, the one they use for trimming so they don't get hit by flying rocks I think they are not that expensive. However, they cheapest alternative is to buy those tool magnetic strips and install then close to your lathe and when you have to put a tool away stick them on the strip. In another case a friend of mine made a long board that he drilled different size holes for different shanks of the turning tools then he made this sliding block that would accommodates the width of the lathe ways like the retaining block for your banjo, then he installs this at the far end behind the tail stock so when he needs to rest a tool he is not using he drops them in this strip so less chances of dropping them accidentally. Of course it moves around on the bed ways so you can relocate them to your convenience any where along the bed.

Re: Anyone use gaiters when turning?

#7

Chuck Jones - West TN

Don't drop things, or learn to move quickly. 


Re: Anyone use gaiters when turning?

#8

Re: Don't drop things, or learn to move quickly. :

John Lucas

chuck As a photographer I learned to sort of "catch" things with my feet. Well not really catch but slow down and redirect the path of things like expensive lenses. Save many a lens like that. In fast moving situations when your changing lenses it's easy to let one get away from you. By trying to catch it with my foot I absorbed enough of the impact to let it sort of roll off and skid on the ground rather than that dreaded thunk.

However in the shop it's a different thing. It's usually either a small screw or a sharp carving tool that I drop. I learned it's better to spread your legs and let it hit the floor. In the case of the small part you get to watch where it rolls and can find it. If it's a chisel you ruin the edge but save your foot.

Re: Anyone use gaiters when turning?

#9

Re: Don't drop things, or learn to move quickly. :

phillip Medghalchi

John, hope that if you spread your legs the gouge or the skew will take a pathe vertically and not slight slant towrds where it shouldn't go. :D

Re: Anyone use gaiters when turning?

#10

Think World Cup - Shin Guards

Craig Daymon

I really couldn't care less about soccer, or pretty much any other professional sport, but since the news won't stop talking about the World Cup and shin guards seem appropriate for what you need...

Should work. I would imagine it is injuries to the front of your lower legs that is the issue, unless you're very prone to backing into things. (In that case, a shop reorganization might be the solution.)

Besides, wearing the shin guards might spur an interest in turning from any kids/grandkids you may have. Of course, every time you finish a turning, you have to remember to scream, "SCORE!".

Re: Anyone use gaiters when turning?

#11

ouch 


Re: Anyone use gaiters when turning?

#12

Re: Think World Cup - Shin Guards

James Heaston

How about the outfit of a catcher?

Er maybe dirt bike riding protectors.

Sure takes the fun outta turning neked! :\