Home Articles Forums Gallery Marketplace Videos

WoodCentral Forums

Knowledge You Can Build On — Est. 1998

Reach the woodworkers who ACTUALLY BUY

OT Anyone tried buffing headlights????

Posts

OT Anyone tried buffing headlights????

#1

OT Anyone tried buffing headlights????

Barry Irby

I am wondering why I couldn't buff the plastic headlights on my Mazda pickup with some of the buffing stuff I have? I have a Bealle buffing system and also have Pumice and Rottenstone for flat work.

I looked at a buffing kit for headlights the other day and it started with 1000 grit wet/dry sandpaper and then went to 3000 grit and then to some sort of buffing compound. Seems like I have some pretty good substitutes.

Anybody tried it?

Re: OT Anyone tried buffing headlights????

#2

Ellis Walentine

No, but...

Ellis Walentine

... there is a polish that you can put on clouded lexan headlight lenses that supposedly clears them up. I haven't tried it, but my mechanic said it works well. Saw it at the auto parts store.

Ellis

Re: OT Anyone tried buffing headlights????

#3

Re: No, but...

Darryl

can't remember the name of the ultra fine sandpaper we use...miro something. Anyway they have a special kit that will take care of the cloudy lens. I tried buffing compound but it is not fine enough. To use the kit you start with one grit in one direction then go up a grade and change the direction. The buffing coupound leaves circular rings. The kit works very well.

Re: OT Anyone tried buffing headlights????

#5

Re: OT Anyone tried buffing headlights????

John Lucas

I bought the official stuff and it worked but 6 months down the line they looked just like they did before I polished them.

Re: OT Anyone tried buffing headlights????

#6

Re: OT Anyone tried buffing headlights????

david gilbert

I used Vince's blue flex abrasive to polish up my 2001 Honda Civic's headlights. If I remember correctly, I started at about 280 and went up to 2000. I used a squirt bottle of water with dishwashing liquid as a sanding fluid. It worked very nicely. The lenses started out somewhat yellow and dull and ended up very clear. They weren't like they were when they were new but they were much better. I used my right angle drill and a soft pad. They stayed nice and clear for about a year. I can't comment what happened after that because I traded the car in for a new car (that had very clear head lights).

Cheers,

David

Re: OT Anyone tried buffing headlights????

#7

I have "cleared" several of my......

JamieDonaldson

...neighbor's car lenses, starting by power sanding with 1000 pads, then 3000 with water. For a final polish I use NuFinish car polish with a felt buffing pad.

Re: OT Anyone tried buffing headlights????

#8

Roger in MO

Re: OT Anyone tried buffing headlights????

Roger in Mo

I have sanded and buffed plexiglass many years ago. We didn't have the real fine sandpaper. We did use two different compounds for buffing but I don't recall what they were. Maybe you could secure a junkyard headlight to try.

Re: OT Anyone tried buffing headlights????

#9

Harry Robinette

Re: OT Anyone tried buffing headlights????

Harry Robinette

Barry

I do my headlights twice a year once they get bad. I use the polish for acrylic pen blanks that Woodcraft sales. Small inside bowl buff and some of this acrylic polish once in spring once in fall everything is seen much better.

DID

99 Ranger

2003 Santa Fe

2003 Tibiron

93 Chevy pu

97 Chevy pu

Re: OT Anyone tried buffing headlights????

#10

Re: OT Anyone tried buffing headlights????

Vince Welch

You can clean up your headlights by starting at a higher grit. I've use both my Blackflex and Blueflex discs then switched over to SIA AIR VELVET discs up to 4000. I use water then a liquid polish. I have people who by product and offer this service... As some have stated they will get dirty again and that is due to exhaust fumes from the vehicles in front of you at stops and there is nothing you can really due about that. But once you have the process down it only takes a few minutes of attention and you are cleaned up again. Let me know if I can help you more. Vince

Re: OT Anyone tried buffing headlights????

#11

Re: OT Anyone tried buffing headlights????

Mike Brazeau

On my almost ten year old Sienna Van I used white diamond polishing compound and Hut Ultra Polish with a polishing wheel in a drill and it did a pretty good job. I just used polishing wheels I buy At Busy Bee. On my wife's RX I sealed a small a hairline crack with thin CA and rubbed off with Micromesh and then buffed.

Re: OT Anyone tried buffing headlights????

#12

Jim Barbour

Re: OT Anyone tried buffing headlights????

Jim Barbour

It was suggested to try toothpaste. Not the gel, but the old fashioned white kind. I've not done it so no promises, but it sounds like it just might work.

Re: OT Anyone tried buffing headlights????

#13

Re: OT Anyone tried buffing headlights????

Michael Gibson

Every now and then when it gets scuffed up l buff my face shield. Michael

Re: OT Anyone tried buffing headlights????

#14

A second question, other than looking better,

Barry Irby

Does it really help? Can you actually see better and have more light?

Re: OT Anyone tried buffing headlights????

#15

Re: OT Anyone tried buffing headlights????

Starry Chan

I read an article on the web regarding using lacquer thinner to clean the headlight lens. I tried it on my 2000 Toyota Tacoma and it did make the lens clear. I then applied Rain-X on it as I did not know of a durable finish for outdoor use.

Re: OT Anyone tried buffing headlights????

#16

Mike Stafford

Re: OT Anyone tried buffing headlights????

Mike Stafford

All I have to say is the headlights you buff better be your own or with permission...... :b

Re: OT Anyone tried buffing headlights????

#17

Allan W

Re: A second question, other than looking better,

Allan W

Most the time it is not because your headlight lens is dirty, it is because the plastic has yellowed on the outside. The buffing removes this layer and refreshes the plastic so that it is clear again and allows more light through.