Home Articles Forums Gallery Marketplace Videos

WoodCentral Forums

Knowledge You Can Build On — Est. 1998

Reach the woodworkers who ACTUALLY BUY

Inhaling metal dust particles...

Posts

Re: Inhaling metal dust particles...

#26

Re: Better never sit in a demo then...

Stuart Johnson

Wonder if the flat woodworkers wear a mask on the tablesaw? Jointers? Planers?

I spend as much time doing flat work as turning and do wear a mask from time to time depending on what I'm cutting. Always when doing any power sanding. I also wear my face mask regularly when doing rough cuts. One of the worst is the router. Hearing protection is a must when using any of the power tools.

Re: Inhaling metal dust particles...

#27

Business Opportunity

Bill Howatt

That might be a neat idea. Make it an electromagnet with some material that has little to no residual magnetism when the current is turned off and all the particles would fall into a bucket. Magnet current would be turned on/off with the grinder.

Bill

Re: Inhaling metal dust particles...

#28

Keith Tompkins

Re: Inhaling metal dust particles...

Keith Tompkins

I learned early on that the cutting oils used in metal working shops was more hazardous than the metal particles...Don't know if that's true for sure.

Re: Inhaling metal dust particles...

#29

Had the very same thought......

Barry Irby

This will be another "invention" that goes no where. Over the years I have invented a number of things that I did not bother to patent or try to market. One was a joist "straightener". When your building a house the joists seldom line up perfectly straight or remain precisely vertical. I made a couple of "wrenches" that allowed you to easily shift them into alignment. They must have been a good idea because they kept "disappearing". Many years later I saw somebody marketign a similar tool.

The electromagnet idea came to me because I was wondering how you would ever clean the filings off a really powerful magnet, unless you could turn it off.

Re: Inhaling metal dust particles...

#30

Re: Inhaling metal dust particles...

Barry Irby

The woman we talked too and about here for a while, known as Doctor Spalt was far more concerned about wood dust in general that the spores from fungi. I wonder where she stands on metal dust?

Re: Inhaling metal dust particles...

#31

Re: Inhaling metal dust particles...

Tony - Memphis

Not sure about the toxicity of the fluid. but all of ours went to a large vat out back. It was skimmed and filtered and sent back out. Trust me...after looking at that vat and knowing what went in it other than the coolant, you would not want to be breathing it...touching it...etc.

Tony