Home Articles Forums Gallery Marketplace Videos

WoodCentral Forums

Knowledge You Can Build On — Est. 1998

Personalized Wooden Watches, Engraved Free

Barrel hinges on a turned box?

Posts

Barrel hinges on a turned box?

#1

Barrel hinges on a turned box?

david

Considering installing barrel hinges on a turned box, because, well...the lid comes off and can be misplaced or worse yet get lost. I know butt hinges need to be placed on the outside edge to allow for clearance when the pivoting part swings open. But a barrel hinge seems to lift up and not be constrained by having clearance issues on the pivoting part. On a circle, however, any mounting distance apart more than an inch or so will have a curving segment that will need to be cleared. Has anyone have any experience installing barrel hinges on a round lid? I guess I could make up a dummy practice piece, but am just lazy, I guess.

Re: Barrel hinges on a turned box?

#2

Re: Barrel hinges on a turned box?

robo hippy

Well, I haven't seen a barrel hinge on a turned box, but have seen variations of a pin through the lid into the side wall of the box, and a small magnet on the other side. The lid pivots.

robo hippy

Re: Barrel hinges on a turned box?

#3

Re: Barrel hinges on a turned box?

david

Thanks, forgot about the pin and magnet solution. Might try that.

Re: Barrel hinges on a turned box?

#4

Re: Barrel hinges on a turned box?

Gary clarke

I like the pin and magnet idea, thanks for sharing.

Re: Barrel hinges on a turned box?

#5

Another suggestion,

Keith Newton

You might think about either tethering it with some sort of nice string or leather.

Also, you can make a loose single or double loop type of hinge, which allows the lid to flip.

Re: Barrel hinges on a turned box?

#6

Thanks for your input!