Don't know if this is a good idea or not. My truck is going to be too expensive to repair and my car has 165K so I questioned if I really needed 2 vehicles I we t looking for an SUV. Needed at least AWD. I have a trailer so my thought is when I pick up logs or plywood I can take the trailer. So I bought a Honda CRV. Worse case scenario I figure I can buy a klunker truck later if this doesn't work
John, When I had my second child, I gave up my truck for a van. I figured I could still haul a lot of wood in it (which I have) but the truck was the best. The van is now ready to give up the ghost and I'm shopping again. I'm thinking SUV too. I'll be interested in your experience. One question: why the CRV instead of something a little larger? Joe
The larger SUVs were considerably more expensive and less gas mirage is a consideration with these prices. I originally wanted 4 wheel drive but again that lowered your gas mileage considerably. Going with the CRV I got a really comfortable vehicle with good gas mileage and the AWD should let me pick up some wood in fields and dirt roads. Probably wont be doing any serious off roadi g of course
Back in early December I had these four log sections on the back of my truck. Back issues had prevented me from lifting large pieces, but I had help loading the NIP. When I got my first and only truck back in '07, I thought it was the best thing since sliced bread. Even thought it rode better than my '05 CRV. But the gas mileage was marginal, and our state has the priciest gasoline in the country. So I decided, no more hauling big pieces for me. Getting too old for that. Did some research, and decided to sell the truck and get a plug-in hybrid, a 2013 Ford C-Max Energi. Lots of bells and whistles, and now getting 91 mpg! Filled up the tank twice since mid-December. We really like this little car. The CRV can haul smaller pieces, and except for a new battery and tires, have not had a lick of trouble with it.
Gave my truck up in 03 went to Hyundai Santa Fe love mine can put 4' wide ply in 6' with seats down. My 03 was a 4 cyl I now have an 06 with V6 gas is 21 around town 24 highway.
Just put 4 green poplar logs in the back, seats down each 23" dia 26 to 28 long and had no problems coming home 38 miles.
I'm going to replace this one I hope next spring ( SWMBO just bought 2014 Mustang V6 6speed,small jet) have to pay down some bills first.
I have had two C-RV's. A 98 that I drove 140K miles and gave it to my son who drove it another 140K. He really dogged it hauling stone in it and what ever. Finally the trans began to slip and he sold it for $2K. My "new" one is an 03 and now has 212k on it. I've wrecked it twice, It takes a beating and keeps on ticking. I'm going for 300K. Nothing bad to say about any Honda I have owned.
I've had C-RVs since the very first ones they brought into the country in 1997, but I've never hauled anything heavier than a bike rack with my trailer hitch, so I don't know about tongue weights and rolling loads and such, or brakes, for that matter. Also, the C-RV's drive system isn't a true AWD and it's hydraulic, not with a transfer case or any heavy duty components. So, take it easy on that off-roading and hauling. I've had two kayaks, three people and at least 500lbs of bikes and gear in ours with no worries, and I routinely hauled a full load of firewood in the oldest one.
Upshot is, I still use my old '94 Toyota 4WD truck for logs and heavy loads and towing and winching, but the mileage is pretty bad.
Two years ago I bought a Toyato FJ. I was going to sell my F150 with17p2000 miles. After some thought I decided to keep it. It has become my wood truck. It's paid for, not bad on gas, insurançe is not bad and the most imporant thing is I have just enough red neck in me not to rid of the truck.
My Transport is a Skoda Yeti - diesel, 170 hp alltime 4WD. Similar in size to the Handa CRV. Removable trailer hook and a twin axle trailer with a 50 x 100 inch bed rated for 1500 lbs.
Better than 35 mpg without the trailer and a little less with. More carrying capacity than even big PU's and lower loading height.