Home Articles Forums Gallery Marketplace Videos

WoodCentral Forums

Knowledge You Can Build On — Est. 1998

Compare cordless drills on the numbers that matter

Bowling Pins for turning?

Posts

Bowling Pins for turning?

#1

Bowling Pins for turning?

Joe Pack

I have a chance to pick up a few used bowling pins. I found a couple of internet threads re: using them, but wondered if any of you have actual experience with these? Or is this a case of trying to make the proverbial silk purse from the sow's ear?

Re: Bowling Pins for turning?

#2

Re: Bowling Pins for turning?

robo hippy

I think all the modern ones are plastic. The older ones were usually hard maple and laminated. I wouldn't pay much for them, free would be better.

robo hippy

Re: Bowling Pins for turning?

#3

Re: Bowling Pins for turning?

John Lucas

If I could get them for free I might try turning one but I sure wouldn't pay for one. You can glue up wood and get exactly what you want and you know what the composition is.

Re: Bowling Pins for turning?

#4

Re: Bowling Pins for turning?

john Veerkamp

last year or so our guild had as it's monthly challenge to turn something from old bowling pins. I turned 2 pieces from one pin. They mimicked the shape of the pin. Vases 1 from the bottom 2/3 and the other from the top 1'3. Turned out real cool. I then turned a coffee/travel mug from another. They make great conversational pieces and are marketable to bowlers. BTW no 2 pins have the exact lamination patterns inside.

When you go to turn off the outside plastic coating use a small gauge taking small cuts. Goes everywhere but worth the effort for the novelty of it.

Re: Bowling Pins for turning?

#5

Re: Bowling Pins for turning?

Doug Wolf

Here are some mallets I turned from some pins in 2011 and they work fine. Some of the pins were cracked around the neck but you can tell by the sound of them when you turn the plastic off.


Re: Bowling Pins for turning?

#6

Sort of like segmented turning-watch out for voids


Re: Bowling Pins for turning?

#7

Re: Bowling Pins for turning?

walta

After you remove the plastic often the wood is often crack from the beating it has taken.

The wood inside the is a glued up from 3 or was it 5 pieces of maple with a void in the center this void is where they adjust to keep all the pins weight and center of gravity exactly the same.

To me I never found a lot wood in a pin to work with.

But I live in a place where we often find maple in the fire wood pile.

Walta

Re: Bowling Pins for turning?

#8

Re: Bowling Pins for turning?

Jennifer Indy.USA

Joe, years ago I got about 2 dozen bowling pins and thought I'd hit the jackpot. But in fact it was sort of like making a silk purse out of a sow's ear, but ending up with a canvas bag with a hole in it. After spending way too much time removing the heavy plastic covering off the pins, which I did on the lathe between centers with a parting tool, only to find that the pins had voids at random places in them, I decided that it wasn't worth it.

Beware of what lies under the plastic pin coating!

:(

Re: Bowling Pins for turning?

#9

Re: People with guns also want them...


Re: Bowling Pins for turning?

#10

Thanks, but "No Thanks"  Think I'll Pass on them

Joe Pack

Sounds like it has been tried and forgotten as a bad idea. Thanks for saving me time and aggravation. :-)