Plywood box mirror
John Lucas
OK this is a project from a piece of wood anyone else would have thrown away. I don't remember who gave me this piece. It was the corner of a solid core door. It was about 4 1/2" square, had 3/16" cherry veneer on the outside and a piece of cherry on one side and a dado on the other side. I kept it around for quite a while and everytime I looked at it thought why in the world am I keeping this. I kept thinking that maybe someday I will come up with a project for it.
Well it finally talked to me. I decided to make a mirror. I glued 2 more pieces of Cherry to the outside and filled in the Dado with cherry. I turned the mirror side and then started on the back. It was about 3 times as thick as my normal mirrors and I started to turn away some of it but then it started to look interesting. I thought what if I leave some of that cherry veneer. I did but didn't like it . then I thought what if I make a box out of it.
I hollowed it out which also reduced the weight so the mirror feels more like a normal sized mirror as far as balance.
turned a lid and then decided to add some epoxy with gold leaf in it for a little more decoration.
dug through my stash and found some more cherry and good quality plywood and made the handle.
I'm pretty happy with this one. 




