Home Articles Forums Gallery Marketplace Videos

WoodCentral Forums

Knowledge You Can Build On — Est. 1998

100+ Wood Species + Full-Shop Services: Lumber, Veneer, Tools & CNC. Everything in One Place.

Oops Another question on bangles

Posts

Oops Another question on bangles

#1

Oops Another question on bangles

Barry Irby

The oops is because I posted this on the main forum by mistake.

Must they be laminated? I know the would be stronger, but it would in crease the work and time by about triple.

Re: Oops Another question on bangles

#2

Steven Antonucci

depends on the wood and thickness


Re: Oops Another question on bangles

#3

Re: depends on the wood and thickness

matt overton

Barry,

I have recently concentrated on many different types of bangles. Most are not laminated. I am making them out of solid pieces of various woods.. Maple, Osage Orange, Cherry, Walnut, Purpleheart, Backwood, Buckeye, as well as Colorwood and assorted burls. I am inlaying some with Turquoise, Red Coral, Silver, Bronze, and colored epoxy. I am carving some and am laminating some with various woods, veneers, and corian. It is only limited to your imagination. It is great to use up scraps laying around the shop. I am amazed the varying reactions from different people. Tastes differ drastically, but all the designs are liked by someone. On the issue of size, I have been making them between 2-1/2 and 3 inch diameter. This correlates to sizes 8 to 9-1/2. The size is the inner circumference, which is best measured by wrapping a cloth tape around the widest part of the hand in a scrunched position. then divide this number by pi (3.1415) to get the diameter of the opening. I find that I can get from $25 to $35 depending on the wood and design.

Re: Oops Another question on bangles

#4

Thick or wide enough not to flex.


Re: Oops Another question on bangles

#5

Steven Antonucci

Glue up opens up possibilities *LINK*

steven antonucci

Joe makes these pretty things. They might be 1/4" thick?


Joe Eid's Bangles