Home Articles Forums Gallery Marketplace Videos

WoodCentral Forums

Knowledge You Can Build On — Est. 1998

THE WOODRAT IS BACK!

Looking for Information to revise my book

Posts

Looking for Information to revise my book

#1

Looking for Information to revise my book

Fred Holder

The publisher of my Book, "The Woodturner's FAQ Book", notes that their supply of the current book is become depleted and asked me to consider revising and rewriting as necessary to bring it up to date and to also search out any new turning techniques that may have been developed that should be included in the revision of the book. Although I try to keep up

with what is happening in woodturning, I'm sure that many useful things have slipped by me over the years.

If you haven't heard of my book, you can see a review at the following website: <http://www.skillspublish.com.au/BK12-119.htm>

Therefore, I'm asking for help. My target date to complete reworking the book is January of 2014. I would certainly appreciate anything that you might be able to supply to help me make this an even better book.

Re: Looking for Information to revise my book

#2

Re: Looking for Information to revise my book

gary clarke

Fred, you might consider a section on links for web sites for forums, tool sites, individual turners, supply sites, segmented sites, etc.

Re: Looking for Information to revise my book

#3

Will you be paying for submissions?


Re: Looking for Information to revise my book

#4

Re: Looking for Information to revise my book

Harry in Beautiful Downtown Kulpsville

While I haven't read your book, it should probably contain some information on the newer carbide tools. I'm not a big fan of them, but the do have their place.

Re: Looking for Information to revise my book

#5

Send me a copy...(gratis) of the current

mjonesrdg

current edition. Only after I have gone through it will I truly know how to help. :D :D :D

Re: Looking for Information to revise my book

#6

Re: Looking for Information to revise my book *LINK*

charlie belden

Mullti-Axis(Multiple Axes) turning

- between centers

- using Joyner Off Center Jig (see Ruth Niles website or google Joyner Pendant Chuck) for pendants

For decorative effects

- laser engraving ("burning images onto pieces"

- laser piercinging

- laser low relief "carving"

May also want to add a chapter on ways to make pieces move - change colors - make sounds - sense things and react with movement, sound, light, or all three (see link below) There's also electroluminescent "wire" that's flexible and can be wrapped around or woven through a piece. When lit it glows life fluorsecent light.


http://web.hypersurf.com/~charlie2/Turning/Arduino/Arduino1.html