Home Articles Forums Gallery Marketplace Videos

WoodCentral Forums

Knowledge You Can Build On — Est. 1998

Compare cordless drills on the numbers that matter

Club Video System

Posts

Club Video System

#1

Club Video System

Ed Wujciak

HELP! I've been tasked by my club, Gold Coast Woodturners, with coming up with a plan to upgrade our meeting video system. The members want 2 cameras (above and ground), ability to switch between them (duh), and the ability to record. I remember seeing several threads in the last year or so on this very subject, but I'll be danged if I can locate them. I'd like to take advantage of the collected wisdom here. No point in me making the same old mistakes. I'd like to be able to make NEW mistakes. Can I get some guidance please? Thanks in advance.

Re: Club Video System

#2

Re: Club Video System

david

First of all, recommend you look up Charlie Belden's articles on a setup that he had worked on for his club. Believe it was within the last year or so.

We wanted to upgrade our club's video taking capabilities and the starting point of reference for most members was the setup that was seen at the 2012 Symposium at San Jose. Our designated video person looked at the system like that at the symposium which is available commercially. Out guy, Bret Schenk, said he could make up the system out of those pop-up tent assemblies and components. If interested in Brett's setup, contact me and I will put you in touch with him.

Re: Club Video System

#3

Re: Club Video System

Ed Wujciak

Thanks for your reply. I'd like to pursue both of your suggestions. I couldn't find those Charlie Belden articles so if anyone could give me a link to them, I would appreciate that. Also, I'd like to hear from Bret Schenk concerning his ideas so please ask him to contact me at ewujciak@gmail.com.

Re: Club Video System

#4

Re: Club Video System

charlie belden

This one that Richard Scott and I put together is a light, portable Knock Down system. I did the mechanical/structural stuff, Richard dealt with the video stuff.

Here's the link to a YouTube video on it

http://www.youtube.com/watch?v=4tXEXvZ6YCk

And here's the link to several web pages with a lot of the details

http://www.hypersurf.com/~charlie2/Turning/AudioVideoSystem/PortableAVsystem0.html

We've refined the system and I haven't updated my web pages to include our mods yet.

In use, in a borrowed facility, we found that we were getting AC interference from the circuit the wall outlet we were using to power everything. We were on the same circuit as a freezer and refridgerator that cycled on and off.

We also were getting interference from video cables being too close together and oriented parallel to each other. Separating them as much as possible helped a lot and having those that had to be close to each other cross each other. The type of video cable also helped. If the two wires carrying the video signal are merely twisted together their more apt to pick up interference from adjacent video cables. "Shielded" video cables (think CoAxial cable with a center wire inside a braided metal sleeve) are less prone to interference.

We were also getting Signal Loss at each video cable coupling as well as each time we split the signal at the Director's Switching Station - but that turned out to be a relatively minor problem. Richard, being a Video Phreak, found what is called a Matrix Video Switcher, which also amplifies video signals. That compensated some for signal loss due to couplings and splitters.

The key to decent quality results for a Projector system is - naturally - the Projector. Richard found a 2500 lumens (unit of lighting) projector on eBay that significantly improved what got to the movie screen we were using for displaying the video. That added about $300 to the system price but the improvement over what the borrowed projector produced in terms of view ability.

We've subsequently returned to our old "permanent" meeting place - a member's shop. We're now going with two fixed cameras, each with its own flat screen display, and wired directly rather than through a switcher onto one screen. The flat screen displays are permanently mounted up near the ceiling and facing the audience. Still have to work a how we'll get the audience display to displays for the demonstrator so he/she can see what the audience is seeing.

For demonstrations that don't involve the lathe (carving, pryro, piercing, texturing, dyeing, painting etc. we'll go with a single camera on a dollied tripod.

If I can be of further assistance please feel free to e-mail me

charlieb@accesscom.com

Re: Club Video System

#5

At this point in time a flatscreen.....

JamieDonaldson

...is a better alternative to a projection system. The prices of big flatscreens are now less than a 3000 lumen projector, the least output that can be seen well in an average illumination room setting. But unless there is a permanent mounting location for a bigscreen, they are quite subject to damage during set-up/tear-down/storage handling, much more delicate than a big projection screen. The flatscreen image is far better for contrast and color saturation than projection images, unless the room lights can be turned off and on easily. The previous problem of limited field of view for flatscreens other than plasmas has been well resolved in newer sets.

Re: Club Video System

#6

Re: At this point in time a flatscreen.....

Ed Wujciak

Thanks to you both. I'm feeling educated....

Re: Club Video System

#7

Re: Club Video System

clay foster

Every professional demonstrator and experienced videographer I have ever encountered is of the opinion that a single camera on a tripod is better than a fixed system. The fixed cameras are seldom in the right place, and useless for demo presentations that are off the lathe, such as surface enhancement techniques.

A deluxe system would be one camera on a tripod with a fixed view, and another camera on a tripod with an operator than can move the camera around and zoom in and out. Instead of switching between cameras, have two flat screen TVs, one for each camera. I've been the operator on a system like this at a school, and it works great.

Re: Club Video System

#8

Even better than a camera on a....

JamieDonaldson

...tripod is a camera on a boom on a tripod. This allows greater mobility and reach without disrupting the presentation, and the boom can reach places that a tripod alone cannot. I presented a boom construction plan in an issue of the AAW Journal in Summer 2008, and have a PDF available for anyone interested in building one.

Re: Club Video System

#9

What's Best is Contextual

charlie belden

If we were RECORDING video - in a studio - with a 14' celing height, 1000 sf of floor space, a boom camera and one or two cameras on wheeled dollies - with stands for lighting and different kinds of lights (halo, flood, spot, etc.) adjusted for each shot - that would be terrific. In a studio, you usually have scripted out what's to be shot so everyone knows what's coming and what they're after. In a studio you have complete control of the space, the lighting, camera positions, the sound - and you can yell "CUT! Let's do another take, but this time . . ." Oh - and each person on each camera probably should have some experience as a cameraman or camerawoman - and a wireless headset so the director can direct the shots he wants. Since you'd be digitally recording, the "post production" work can assemble the best takes and shots and leave the rest of the bits on the "cutting room floor" during the editing processing. And sound levels can be balanced. Can't do any post production when working LIVE - you'rer in WYSIWYG mode (What You See Is What You Get).

We tried all that - but NOT in a studio - in a temporary meeting site. The boomed camera operator had to avoid overhead lights - and the turner doing the demo - all while looking at his monitor showing what his camera was seeing - zooming in our out to show details - and trying not to step on or run over his camera's power cord and video signal cable on the floor. The floor cameras on dollies had the same power cord and video signal cable issue to deal with - while getting the shot the director was telling them in their wirelss headsets the shot he wanted - all done without obstructing the audience's view of the demonstrator - or getting in the way of the demonstrator. And all the equiptment had only a 10' wide by 10' deepr by 8' tall space to work in. And without a script so everyone operating equiptment AND the demonstrator knew what would happen next - there was a real need for quick clear communication - and experience working "live".

Here's the context we were working in and the equiptment we were using

- one fixed mount camera at the tail stock end looking towards the headstock,remotely zoomed in or our

- one dollied camera with operator wearing wireless headset so the guy operating the boom camera, who acted as the director, could direct his shot

- one industrial strength commercial boom that allowed the camera to be moved up and down, in and out, pan left right, pan up.down and remotely zoomed in or out

- lighting on stands and overhead fluorescent

- demonstrator wearing wireless lapel mic and amplifier and speakers to project his voice

- four video monitors, one for each camera and one showing what was going to the video projector

- not visible is a four in - one out video switcher to select which camera feed went to the video projector

- not shown, a 2500 lumens video projector permanently mounted from the ceiling above the audience

- missing is a black out curtain to block the light from the demonstator's area from getting to the projection screen adjacent to the demonstrator.

http://web.hypersurf.com/~charlie2/Turning/AudioVideoSystem/OriginalSetUp1.jpg

http://web.hypersurf.com/~charlie2/Turning/AudioVideoSystem/OriginalSetUp2.jpg

This set up took well over and hour to unpack and set up and and another hour to tear down and pack up. Two hours of set up and tear down - for a 40-60 minute demonstrating during a 3 hour club meeting. That meant the video people had to be at the meeting site for FIVE HOURS since the tear down and pack up couldn't be done during the meeting.

Yes, the demonstrator could have acted as the Director, but that would affect the flow of the demo, and not all demonstrators have experience at directing video cameras. In fact, most club demos are done by club members or by a member of another club in the area, not by professional demonstrators.

If you're NOT in a studio, even if you have semi-pro stuff, but rather in a temporary space that is also used for other purposes, and you're videoing one shot - live action - with no second takes - things get a lot more complicated - and many more problems to deal with. The more complex the system, the more likely something can and likely will go wrong. The more people involved the greater the opportunity for miscommunication and the more difficult it is to coordinate. The fewer people and things have to move - the simpler things get.

In our former club president's shop we have another unique situation. His lathe is in small room - about 10' wide but only about 6' deep and with a 7'6" celiing height, the audience side of the room is open to a space for chairs of about 16' x 14' - with three feet between the front row chairs and the lathe. There's really no room for a boomed camera or dollied cameras, either behind or in front of the lathe, nor on either side of the lathe.

In this situation two fixed celing mounted zoomable cameras - one with a tail stock view, one overhead looking down, an overhead fluorscent and another light on a gooseneck suspended from the ceiling get you most shots needed for an At The Lathe Demo. For Off The Lathe Demos a hand held camera would probably work adequately - what with Image Stabilization built into most cameras today. If not, a dollied tripod camera is available.

If your club meets in a borrowed space, shared with others, the conduit frame system works pretty well. Goes up and comes down quick, one person can operate it, stores in a protective ply box on wheels and is AFFORDABLE - around $800 for everything except a projector.

Are there better video set ups for live action demonstrations? Absolutely.

Is there a One Size Fits All? Probably not.

The set up we put together is pretty good for an affordable and transportable system and any club with 50 or more members can probably afford to put one together and operate it with little experience or special knowledge or skills.

As usual

Your Mileage May Vary

.