Home Articles Forums Gallery Marketplace Videos

WoodCentral Forums

Knowledge You Can Build On — Est. 1998

Premium Domestic, Figured & Live Edge Hardwoods in Stock. Best Prices for Serious Woodworkers.

So, What's it like.....

Posts

So, What's it like.....

#1

Keith Tompkins

So, What's it like.....

Keith Tompkins



..to demonstrate at a National Symposium? This year was the sixth time I've demo'd at this level; you would think it would become easier each time. It doesn't! No matter how many dry runs you've done, or how many club demos, or how many practice pieces....I still can't sleep the night before the "big one". All sorts of thoughts race through your head...."Did I bring all my tools?", "Will I forget the most important details?", " Will I get a catch in front of a big crowd?", "Can I be sharp enough with no sleep?" "What if......?" This year I presented "The Art of the Finial", and here's one of the pieces I turned. The wood is yellowheart. Is it perfect? Nope. I've turned countless finials, most of them far more intricate, but not too bad considering the sea of faces...some of them very recognizable! It's easy to get a flowing curve in the shop, or obtain the perfect skew cut...not so easy with the camera rolling! All the while knowing a screwup at this level may be your last..... The demo is over, a handful of questions, and then the feeling of success! Ah..Whew!. Would you consider demo'ing at a national level symposium?

Re: So, What's it like.....

#2

OK Keith, I recall sharing a demo........

JamieDonaldson

...room with you at the Kansas City Symposium, and I recall thinking at the time that you were very well prepared for the task at hand. You have prepared several different topics for demos, and that does increase the complexity of presentation, but you look so young to be such an old pro! ;)

Re: So, What's it like.....

#3

Rob Wallace

Re: So, What's it like.....

Rob Wallace

It was good to see you in Tampa, and also to meet your wife!

The reports I heard were that your demos were well-attended and were really helpful. I am sure you did a great job! Unfortunately I was not able to attend it (in actuality, I saw only 3 demos over the entire symposium (well, actually, parts of 3 demos), and was pretty busy through the whole weekend. I wish I could have seen your finial demo; perhaps in the future?

I agree that doing demos can be nerve-wracking, but in the end are entirely rewarding to the presenter. They force you to think very hard about your topic, and make sure you are doing your best to relate the information in a way that all can understand. I am now getting ready to do a demo on this coming Thursday evening, and I am already re-doing parts of the "lesson plan" from its previous version to include updated information and new images which will make concepts a bit clearer.

I do enjoy demonstrating and meeting many other turners; hopefully what I have to say might help people in what they do at the lathe, etc. and make the process a little safer and more enjoyable. That makes the preparation for each demo "worth it"......

Rob

Re: So, What's it like.....

#4

Keith Tompkins

Re: OK Keith, I recall sharing a demo........

Keith Tompkins

Hi Jamie, Yes I remember! You were going over the lathe with a fine-toothed comb...and a set of allen wrenches! You were very well prepared! Young? I'll take it...I'll be 61 in January. Thanks for the kind words :)

Re: So, What's it like.....

#5

Teaching never stops, because once.....

JamieDonaldson

...a teacher, always a teacher! ;)

Re: So, What's it like.....

#6

Alan Zenreich

Re: So, What's it like.....

Alan Zenreich

I've seen Keith demo a few times, and have attended a full day workshop with him. Always a rewarding experience.

Lauren and I have demo'd, mostly to clubs, several times over the past few years. Tampa was our first time demonstrating at a national level event.

I did feel anxiety while preparing all our gear for airline travel (gathering the required equipment, minimizing the number of checked bags, weighing each bag, and deciding what can be carried on). Once the bags arrived on the luggage carousel, we were set.

Going to a national event takes a lot of the stress out of a demo... if the tools don't arrive, a visit to the vendor area can get you back in business (I forgot to bring a small skew, and managed without it for our first rotation, but acquired one for our second rotation).

Lauren and I never feel stressed when actually doing our demonstrations. We enjoy it, and the audience does too. When you realize that people in the audience WANT to be there, and don't have to be there, you realize that you're among friends.

We bring a lot of toys, errrr, tools, many of which are new to the audience. The only real stress we feel is rushing to get set up in the room, and then breaking down in time for the next demonstrator to do his/her rotation.

As you know, we also bring our own audio and video gear (for the same reason we bring our own chisels), so that take an extra bit of time to set up and test.

I've taught photography, database programming, and other topics to many audiences for most of my career. Teaching woodturning is pretty low stress. We're well prepared, with photographs that give an overview of what we're going to cover, actual samples of our work on display, and many items to pass out to the audience (for example, Lauren's "connections" board that shows many kinds of jewelry findings)

Lauren and I really do enjoy teaching... and we don't get the butterflies that many others experience.

My attitude when working with the audience is "how do we best spend our time together?" Most times, I do what I planned to do... other times the sessions take a turn and go off in a different (and more relevant) direction, based on the needs/desires of the crowd.

I will mention one observation about the demonstrators at the Tampa Symposium. Although I didn't get to sit in on any turning rotations, Looking at the photos that Andi Wolfe made, I was pretty surprised to see how many demonstrators still were not wearing protective gear.

Several people came up to Lauren and asked if we would do demonstrations and/or all day workshops for their clubs. If scheduling permists, it would be our pleasure.

Re: So, What's it like.....

#7

Steven Antonucci

Demonstrating is really easy

steven antonucci

All you have to do is plan for everything, and then accommodate the things you forgot to plan for...

Agree with Alan Z... You are there with an audience that isn't like the people at a mountain bike race in the steep downhill rocky section (they are there to see the wrecks, and I always figured if I was going to wreck, they were softer than the rocks...) I push our guys to demo all of the time, but I am surprised at how many people won't do it.

Steve

Re: So, What's it like.....

#8

Re: So, What's it like.....

david

Keith:

Its not so much what you produce during the demo, but you can convey your thought process in your work, and that goes a long way with an audience, IMHO.

I've only been to two national symposiums, and in the future would like to run into the fairly well-known presenter I saw in Portland in 2007 and ask him what his recollections were on his segment on multiple axes turning. It wasn't a total disaster, but there were so many things that went wrong or didn't come off during the demo, and I can't believe that he wasn't embarrassed. Wonder if it was lack of preparation; first time jitters; equipment malfunctions, or whatever. Perhaps he was having one of those days, or some people do great work but just cannot be comfortable in front of an audience.

Re: So, What's it like.....

#9

What made me sweat a demo trip.....

JamieDonaldson

...several years ago was that when the plane arrived, my baggage containing all my tools was not on it! Not having clean clothes was a minor inconvenience, but having none of my tools and other demo materials was panic time! :b

Re: So, What's it like.....

#10

Keith Tompkins

Re: What made me sweat a demo trip.....

Keith Tompkins

Jamie, that happened to me in Orlando...UPS dropped my bags off at the hotel, who put them in a storage room...the employee who knew where they were was off for the next couple of days....a bit of panic!

Re: So, What's it like.....

#11

Keith Tompkins

Re: So, What's it like.....

Keith Tompkins

It was great to see you as well, Dr. Rob! My wife enjoyed your talk about Iowa!

Re: So, What's it like.....

#12

Keith Tompkins

Re: So, What's it like.....

Keith Tompkins

Alan, it was great to see you guys! True professionals, in every sense of the word! Great job!

Re: So, What's it like.....

#13

Re: What made me sweat a demo trip.....

John Lucas

Yea they put me on a Oneway in Orlando. I brought my M33 adaptor but completely forgot about the #3 morse taper on the tailstock. I try to bring everything but you never know. I forgot my chuck key when I did a demo in South Carolina. Fortunately it's a 10mm hex key and we were meeting in a hardware so they just grabbed one off the shelf.

Re: So, What's it like.....

#14

Alan Zenreich

Re: What made me sweat a demo trip.....

Alan Zenreich

John,

This was the first time I had turned on a PM 3520. I fabricated a draw bar for it, and was very happy that it wound up being the correct length. Because the MT2 mandrel I use seats differently in various lathe spindles, I was taking an educated guess on the threaded bar length needed for the PM. Fortunately, it worked out just fine. Now I have drawbars for 4 different lathes... And the collection is growing!

Re: So, What's it like.....

#15

Keith Tompkins

Re: So, What's it like.....

Keith Tompkins

HI David! I think when things begin to go badly, things begin to snowball out of control. I usually have a backup plan just in case; maybe an extra piece that's partially finished that I can use if I ruin the first piece. I play on a fast-pitch softball league...recently,I missed a fly ball with the bases loaded. Then, another routine fly ball I misjudged. I was rattled, and the other team started hitting towards me intentionally. The coach had to bench me...humiliating to say the least....at least my demo went ok!

Re: So, What's it like.....

#16

Rob Wallace

Re: So, What's it like.....

Rob Wallace

If you both are ever out here visiting Des Moines and environs, give me a heads-up and I'll have you over. (You never know what kinds of turning wood will be around, or what kind of homebrew will be ready!)

Rob

Re: So, What's it like.....

#17

Re: So, What's it like.....

Bob Macgregor

Sure! Uh...do they have a category for "what not to do" or "everything I know, I learned on YouTube"?

Re: So, What's it like.....

#18

Re: So, What's it like.....

Don Orr

I'm sure your demo went very well Keith. Wish I could have been there to see it and others. I have seen you turn many times and learned something every time. You are always well prepared and extremely knowledgable. You are so skilled on so many topics. But I do understand how it can be nervewracking when you are away from home and have to rely on others to keep track of your materials, especailly when you have to ship them ahead. I don't sleep well most of the time. I have a hard time turning my brain off most nights. I wish it was because I had so many brilliant turning/art ideas racing through my head, but sadly it is not.

I enjoy doing demos. I'm doing one tomorrow for our local club. I think I'm prepared but you never know til you get there and set up. I have no problem speaking in front of people-just the opposite really-you can't shut me up. I have to be careful to stay on topic. I can easily get sidetracked by questions, but questions are a good thing. I have demoed at our regional symposium but not at the "Big Show"-yet. I would be thrilled to be skilled enough or have some sort of signature work that people would like to see and learn about, but I'm really just a "round & brown" basic turner. So I'm not ready to move up to the big time yet, but I'm still young(ish) so don't count me out.

Re: So, What's it like.....

#19

Alan Zenreich

Re: So, What's it like.....

Alan Zenreich

Don,

You just need to comb a little grey into your hair... catch up with the rest of us < vbg >

Re: So, What's it like.....

#20

Keith Tompkins

Re: So, What's it like.....

Keith Tompkins

Thanks Don..and You're too humble. I've been to a couple of your demos, and they were terrific! Even with several "big guys" sitting in, you kept your cool and did a great demo. Maybe it's time to go for the "big one"!

Re: So, What's it like.....

#21

Re: So, What's it like.....

Don Orr

Already in progress! :D