Home Articles Forums Gallery Marketplace Videos

WoodCentral Forums

Knowledge You Can Build On — Est. 1998

Precision you can feel — woodworking perfected with Lee Valley

Peppermill Kit (Mr. Dudley)

Posts

Peppermill Kit (Mr. Dudley)

#1

Peppermill Kit (Mr. Dudley)

Jay St. Peter

I am not making a peppermill, but my father handed me one they had bought at a craft show years ago. The mechanism has stopped working properly and he asked if I could find a replacement. It clearly says Mr. Dudley on the bottom and looks a lot like the one in this article:

http://www.hiltonhandcraft.com/Articles/Basic%20Peppermill%20Method.pdf

I checked most of the usual places, anyone know where to buy one of these kits?

Thanks,

Jay

Re: Peppermill Kit (Mr. Dudley)

#2

Re: Peppermill Kit (Mr. Dudley)

Chuck Engstrom

Hi Jay -- Amazon seems to sell an entire Mr Dudley peppermill for $8.99, less than we typically pay for peppermill mechanisms from the popular woodturning suppliers. Just buy that and scavenge the mechanism from it. It's shorter than most, but you might be able to use a longer drive shaft out of another kit. I have square shaft for peppermills if you need some.

www.amazon.com/Dudley-Acrylic-Kingston-Peppermill-4-Inch/dp/B005T62080/ref=sr_1_9?ie=UTF8&qid=1371520235&sr=8-9&keywords=peppermill

Good luck with it -- Chuck

Re: Peppermill Kit (Mr. Dudley)

#3

Re: Peppermill Kit (Mr. Dudley)

Jay St. Peter

Thanks Chuck. I've sort of sussed out that another company bought the Mr. Dudley and they don't sell kits anymore. Trying to determine if some of the other kits are a direct copy or not. I need to measure up the one I have and see if the sizes are correct for installation of one of the others. If not, I may just buy one anyway and get a lathe and make them a new one ... seriously.

Re: Peppermill Kit (Mr. Dudley)

#4

Re: Peppermill Kit (Mr. Dudley)

david

You won't know for sure until you try it, but it seems that the Crushgrind mechanisms sold at the woodturner supply houses would work with some modifications to the existing peppermill. You would need to drill out different sized holes for the mechanism and perhaps add something decorative to the top to take the place of the screw on the top. I modified a no longer functioning 1960's Dansk teak pepper mill/salt shaker with a crush grind setup, but for pepper only.

Re: Peppermill Kit (Mr. Dudley)

#5

Re: Peppermill Kit (Mr. Dudley)

Jay St. Peter

I need to measure, not a lot of slack in this implementation. Thanks for the idea, I'm hoping one of the kits will fit with minimal modification.