Home Articles Forums Gallery Marketplace Videos

WoodCentral Forums

Knowledge You Can Build On — Est. 1998

Premium Domestic, Figured & Live Edge Hardwoods in Stock. Best Prices for Serious Woodworkers.

Tall covered containers

Posts

Tall covered containers

#1

Tall covered containers

david

This traditional Hawaiian shape for containing foods that require a cover is called an Umeke. This is deeper than the more common calabash shape and a first for me. Daughter of a childhood classmate found me through our club website and saw that I grew up in the same neighborhood as her father who had just passed away. The container will hold remains of his ashes that are not scattered. Perhaps 2-1/2 times the minimum size for an urn, these larger sizes are what is more likely to have been made by the Hawaiians. Made two--on the left is Milo, 6-1/2" dis. X 9" tall. One on the right is Koa, grown on Oahu,m 7" dis. X 10" tall. Finish on the Milo is Waterlox then Beal buffed. Koa is Watco natural before buffing. Milo has a tendency to get sticky when finished with a BLO product. Waterlox does contain some BLO, but from my experience does not get sticky on Milo. Offered to make two from different woods. Client liked both and couldn't choose so bought both, and unexpected surprise.

Re: Tall covered containers

#2

Mike Stafford

Re: Tall covered containers

Mike Stafford

I really like this umeke form and having tried to turn it I learned very quickly it is not as easy to get the subtle curves that are needed to have it look right.

It is hard for me to pick a favorite as I like both koa and milo. Both woods offer different challenges in turning.

Nice job, David and beautiful work.

Re: Tall covered containers

#3

A Caution On Ashes

Mark Mandell - Gone Round In New Jersey

Hi David,

Nicely done pieces; warm and well studied.

You should warn your client that ashes must be sealed to keep them from taking on water vapor. Crematoria use heavy-weight plastic that is then heat-weld sealed. Reason is that ashes attract moisture and will become a single hard lump in short order. I've turned a number of urns and I always coat the interiors with at least two applications of epoxy (including the lid) and instruct the recipients that either the ashes must be sealed in plastic (NOT zip-loc bags) or the jars must be epoxied shut at the rims to prevent the urn from becoming a very nice rattle. Check with your local crematorium and they will usually provide the sealing service if you give them the urn.

Nice work.

Re: Tall covered containers

#4

Thanks, Mark, for the sage advice.


Re: Tall covered containers

#5

Steven Antonucci

Love the Pewas in the lids


Re: Tall covered containers

#6

barry rockwell

Re: Tall covered containers

barry rockwell

Beautiful pieces, David. I have always loved the calabash and you have inspired me to try my hand at the Umeke.

Re: Tall covered containers

#7

Love the Whats?

Mark Mandell - Gone Round In New Jersey

What is a "Pewa"?

Google lists it, inter alia, as a "small fruit".

I don see no small fruit in the pitcher . . .

Re: Tall covered containers

#9

"Butterfly" I Get

Mark Mandell - Gone Round In New Jersey

Even "Dutchman" (flying or otherwise) too.

Obscure island reference is lilo makai on this haole :D

Note to Google: Since you and some snoop are recording this, update your search results!

Re: Tall covered containers

#10

Butterfly patches like keyways

david

are a trademark in the wood slabs George Nakashima is known for. Many of the pieces I turn end grain and the pit remains. And the pith will often develop checks and cracks. So I put a butterfly patch over it. I use a plastic template with a straight bit on a laminate trimmer to cut the recesses, and use laser-cut pieces of wood that fit closely into the void created. Takes me less than 15 minutes from start to finish. The patch is set into the surface with CA glue and the high points are sanded level with the surface. Contact me if you want a reference to how to get these butterfly (and other shape) template kits.

Re: Tall covered containers

#11

Steven Antonucci

I know David knows what a pewa is

steven antonucci

after all, he made two of them ;)

Steve

Re: Tall covered containers

#12

Re: Butterfly patches like keyways

Mark Mandell - Gone Round In New Jersey

Hi David,

I've used "flies" in flatwork for years. Don't need templates as I make the fly first, use it as a marker, then rough the socket with a router, and lastly cut to final with bench chisels. Get a nice hairline joint and am not locked into a particular shape.

I'd post a pic, but I'm not going to hijack your thread, especially with flatwork. ;)

Interesting parallel with African art in that there may be an aesthetic valuation that states the more patches/flies/pewas in the piece, the more valued it is. Curious as to the source of that value scheme, but that's for another day.