Home Articles Forums Gallery Marketplace Videos

WoodCentral Forums

Knowledge You Can Build On — Est. 1998

Combination Press Plough Plane

Mirror #1--J. Lucas Design

Posts

Mirror #1--J. Lucas Design

#1

Roger in MO

Mirror #1--J. Lucas Design

Roger in MO


This is my first attempt as making a mirror following John's excellent directions. Thanks John and thanks Ellis for keeping these types of materials available.

The body is from a walnut slab harvested several years ago. The handle is elm.

I need to work on my spindle turning don't I.

I bolted a crossfeed vice (H.F.) to the drill press to hold a vee fixture similiar to that which John showed in his instructions. It allows adjustment for variations in mirror body thickness.

Thanks for looking.

Re: Mirror #1--J. Lucas Design

#2

Re: Mirror #1--J. Lucas Design

Emmett Manley, Lakeland, TN

Good first attempt. John got me started making these mirrors last November (he does not know that) and I have now made about 45.

The most difficult step is drilling a proper 1/4" hole in the body and I have tried several methods and jigs, but I still experience some difficulty. Most of my mirrors utilize a 1/4" tenon on the handle, but if the wood is suspect, I use a 1/4" dowel to join body and handle. It is helpful to make a reverse image jig for the mirror to fit in the body -- one with the exact diameter, depth, and flatness incorporated.

Your mirrors will get smaller and lighter as you continue your quest. I have used 3", 4", and 5" mirror glass and 4" seems optimum, although the 3" mirrors are cute and can be carried in a lady's purse.

Re: Mirror #1--J. Lucas Design

#3

Steven Antonucci

Aside from the bead at the top, it looks great?

steven antonucci

Nothing wrong with it.

S

Re: Mirror #1--J. Lucas Design

#4

Re: Mirror #1--J. Lucas Design

John lucas

Looks great. I like the little bead on the bottom. I make my tenons 3/8" I have had only one or two broken over the years if I'm really nervous a our the tenon I center drill it and install a metal dowel

Re: Mirror #1--J. Lucas Design

#5

Roger in MO

Re: Mirror #1--J. Lucas Design

Roger in MO

Thanks for the comments. I'll try to post a photo of the drill fixture whenever I have the camera in the shop. The handle was turned to 3/8 dia. at the mirror end.