Just finished this hollowform vase made with 3/4" baltic birch plywood. It's about 8" tall and about 6" wide. I copied the idea, design and form from a poster on the LumberJocks forum. Had to buy a new hollowing tool to turn the inside, which worked very well. Some of the plywood plys had bad tearout, so a lot of sanding and glue patching was needed. All comments welcome.
It was a solid block of glued together plywood panels before turning. Below is an image of the bottom of the vase so you can see how the individual plywood sections were arranged. I may try a platter or shallow bowl next.